Best Seller Items
Featured Items
-
-
HX711 Dual-Channel Weighing Sensor Module
NPR 400.00HX711 is an electronic scale module, whose working principle is to convert the measured changes in resistance value changes, through the conversion circuit into electrical output. The module communicates with the host computer through TTL 232.
-
Hydrogen Gas Sensor (MQ8)
NPR 550.00This hydrogen gas sensor is suitable for sensing hydrogen concentrations in the air. It can detect hydrogen gas concentrations anywhere from 100-10000ppm. This sensor has a high sensitivity and fast response time. The sensor’s output is an analog resistance. The drive circuit is very simple; all you need to do is power the heater coil with 5V, add a load resistance, and connect the output to an ADC.
-
i2c LCD 1602/2004 Adapter Plate
NPR 350.004 line screen 1602 Arduino 1602 I2C interface
The Arduino IIC LCD1602 / I2C interface adapter plate without LCD screen
1602 screen needs seven IO mouth to drive up. -
IDC 20 Pins Rainbow/Gray Color 2.54mm Pitch 48/66/118/128cm Long Flat Bendable Ribbon Jumper Cable Female Connector
NPR 540.0020 Pins Connector Flat Ribbon Cable,2.54mm Pitch
Easily and directly inserted into PCB
Suitable for internal wiring in office equipment, audio and video machines
-
IIC Serial White OLED Display Module
NPR 500.000.96 inch IIC Serial White OLED Display Module 128X64 (Yellow-Blue, & just Blue)
-
Infrared Sensor + Remote Control
NPR 500.00A pair of infrared sensor and a 21 keyed remote control.
-
IR Infrared Flame Detection Sensor Module
NPR 320.00- Detection angle about 60 degrees, it is sensitive to the flame spectrum.
- Accuracy adjustable
- Operating voltage 3.3V-5V
- With a mounting screw hole
- Comparator chip LM393 ,it is stable.
- Flame detection distance, lighter flame test can be triggered within 0.8m, if the intensity of flame is high , the detection distance will be increased.
-
IR Infrared Obstacle Avoidance Sensor Module
NPR 300.00- IR Infrared Obstacle Avoidance Sensor Module can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, and black and white line tracking and so on
- the module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted.
- Can be used for 3-5V DC power supply modules.
-
-
IR Sensor(Photodiode)
NPR 19.00The emitter is an IR LED and the detector is an IR photodiode. The IR phototdiode is sensitive to the IR light emitted by an IR LED. The photo-diode’s resistance and output voltage change in proportion to the IR light received. This is the underlying working principle of the IR sensor.
-
IRF 520 MOSFET
NPR 100.00This N-Channel enhancement mode silicon gate power field
effect transistor is an advanced power MOSFET designed,
tested, and guaranteed to withstand a specified level of
energy in the breakdown avalanche mode of operation. All of
these power MOSFETs are designed for applications such
as switching regulators, switching convertors, motor drivers,
relay drivers, and drivers for high power bipolar switching
transistors requiring high speed and low gate drive power. -
-
Joystick Module
NPR 400.00Lots of robotic projects need a joystick. This module offers an affordable solution
to that. The Joystick module is similar to analog joysticks found in gamepads. It is made
by mounting two potentiometers at a 90 degrees angle. The potentiometers are
connected to a short stick centered by springs. -
JSN-SR40T Ultrasonic Ranging Sensor Module
NPR 1,800.00Using IO port trig trigger location, to the high level signal of at least 10us module automatically sends 8 40khz fang bo, automatic detecting whether a signal return. A signal return, a high level is output through the io port echo, the time duration of the high level is ultrasonic from launch to return. The test distance = (high level time * speed of sound (340m/s)) /2ranging, the measured object area of not less than 0. 5 square meters and the plane as required to smooth, otherwise affect the measurement results.
-
jumper cable(Wire) per metre
NPR 25.00It is a simple pair of connecting wire that can be cut according to the desire and used in making connections in the circuit. It can be used in both bread board and the perforated board.
