Best Seller Items
Featured Items
-
Open Timing Belt (2mm*6mm*1M)
NPR 250.00- Pitch: 2mm (GT2)
- Material: Neoprene Rubber With Fiberglass Core
- Width: 6mm
- Total Length: 1M
- Shape: Open Loop
- Core Wire Material: Rubber
-
Capacitive Touch Dimmer
NPR 250.00- Hole distance: 16MM
- Aperture: 2.5MM
- Voltage range: 2.4-5V
- Maximum output current: 500MA
- PCB size: L23MM *W20MMThe lamp brightness can be adjusted by requirement, it is very to operate.
It can touch in medium protection, such glass, acrylic, plastic, ceramics and so on, which is very safe.
Wide application of voltage range, you can choose arbitrarily between 2.4V to 4.5V.
Simple applied circuit, less peripheral devices, easy processing, low cost.
Anti power and phone interference, the EFT can reach above +/-2KV; the touch response sensitivity and reliability will not affected by the close distance or multi-angle mobile phone interference.
Install: Neednrsquo;t to touch copper foil directly,the dimming can be processed across the acrylic glass(above 3mm) or plastic.
Application: It can control LED module, light and so on.It is available for indoor LED, lighting lamp,DIY automotive lights dimming refit.
Function:Single touch,using the principle of capacitance touch.The default function is switch, dimming, with brightness memories LED touch dimming.It will light slowly when turn on the lights, and become dark slowly when turn off, which effectively avoid the stimulation to eyes.
Dimming mode: Non-polar PWM dimming.
Wiring method: PCB board(VCC,GND) is power input,(LED+, LED-) is connected with the LED lamps of positive and negative level (fingerprint) touch area.
-
Micro USB 5V 1A Lithium Battery Charger Module (Charging Board With Protection Dual Function)
NPR 250.00Micro USB 5V 1A 18650 TP4056 Lithium Battery Charger Module Charging Board With Protection Dual Functions 1A Li-io
-
TTP223B Digital Touch Sensor
NPR 250.00The TTP223 is a touch pad detector IC which offers 1 touch key. The touching
detection IC is designed for replacing traditional direct button key with diverse pad size.
Capacitive touch allows electronics to sense when your finger is within a few millimetres
of a surface to simulate a button “press” just like how the pushbutton works. Capacitive
sensing may be used in any place where low to no force human touch sensing is
desirable. -
One Channel Relay Module (5V)
NPR 250.00This single relay module can be used to control lighting, electrical and other 220V equipment from an Arduino digital output.
-
Stepdown Power Supply Module (Buck Converter)
NPR 250.00Features:
- Mini DC to DC 12V-24V to 5V 3A
- Output 1.8V, 2.5V, 3.3V, 5V, 9V, 12V
-
Sound Detection Sensor Module
NPR 250.00Product Features
- Working voltage:DC 3.3-5V
- Dimension: Approx.4.5(L) x 1.7(H) x 0.9(W)cm
- Main chip: LM393, Electret condenser microphone
- Package Included: 1 x Sound Detection Sensor Module
-
Large Breadboard (High Quality)
NPR 250.00This is your tried and true white solderless breadboard. It has 2 power buses, 10 columns, and 60 rows – a total of 800 tie in points.
All pins are spaced by a standard 0.1″. The two sets of five columns are separated by about 0.3″, perfect for straddling a DIP package over. The board accepts wire sizes in the range of 29-20AWG.
This board also has a self-adhesive on the back. The boards also have interlocking parts, so you can hook as many together as you’d like.
-
25 rpm Geared Motor
NPR 250.00The 20 rpm geared motor which runs on 9V-12V power supply. Highly used for robotics and electronic projects.
-
TMP36 Temperature Sensor
NPR 250.00TMP36 is a wide range, low power temperature sensor that outputs an analog voltage that is proportional to the ambient temperature.
-
PIR Sensor HC-SR501
NPR 250.00A passive infrared sensor (PIR sensor) is an electronic sensor that measures infrared (IR) light radiating from objects in its field of view. They are most often used in PIR-based motion detectors.
For most of our Arduino projects that need to detect when a person has left or entered the area, or has approached, HC-SR501 PIR sensors are a great choice. They are low power and low cost, pretty rugged, have a wide lens range, easy to interface with and are insanely popular among hobbyists.
HC-SR501 PIR sensor has three output pins VCC, Output and Ground as shown in the diagram below. It has a built-in voltage regulator so it can be powered by any DC voltage from 4.5 to 12 volts, typically 5V is used. Other than this, there are a couple options you have with your PIR.
-
RF 433MHz Transmitter & Receiver Module
NPR 280.00RF modules are very popular among the Arduino tinkerers. The 433MHz is used on a wide variety of applications that require wireless control.
Specifications RF 433MHz Receiver
-
Frequency Range: 433.92 MHz
-
Modulation: ASK
-
Input Voltage: 5V
Note: Each unit contains a pair of transmitter and receiver.
-
-
Solder Iron Stand
NPR 290.00A soldering iron stand is used to keep the hot soldering iron away from you and the work area. A soldering iron stand i made out of metal and comes with a clening sponge to clean the soldering irons tip.
