-
The emitter is an IR LED and the detector is an IR photodiode. The IR phototdiode is sensitive to the IR light emitted by an IR LED. The photo-diode’s resistance and output voltage change in proportion to the IR light received. This is the underlying working principle of the IR sensor.
IR Sensor(Photodiode)
NPR 19.00 -
Photo resistors, also known as light dependent resistors (LDR), are light sensitive devices most often used to indicate the presence or absence of light, or to measure the light intensity.
LDR Sensor
NPR 25.00 -
Thyristor is a solid-state semiconductor device with four layers of alternating N and P-type material. It acts exclusively as a bistable switch, conducting when the gate receives a current trigger, and continuing to conduct while the voltage across the device is not reversed (forward-biased). It is one of the several controllable semi conductor devices that can act either like a switch, rectifier or as a voltage regulator.
Thyristor / Thermistor
NPR 30.00 -
Reed switches are magnetically-actuated electrical switches (not magically-actuated, though it seems that way sometimes). When the body of the switch is exposed to a magnetic field – like a magnet or even a strong electrical current – two ferrous materials inside pull together, the connection closes, and current can flow. In absence of a magnetic field, the switch opens as does the circuit it’s a part of.
Reed Switch
NPR 30.00 -
Technical specification
Supply: 5 V
Power consumption: 0.4 to 1.0 mA
Min. Ee irradiation: 0.35 mW/m2 typ.
Angle of detection: 90
Temperature range: -25 C to +85 CTSOP1838 IR Receiver
NPR 40.00 -
The TCRT5000 are reflective sensors which include an infrared emitter and phototransistor in a leaded package which blocks visible light. The package includes two mounting clips.TCRT5000 sensor works with the general infrared sensor, like a sense of a TCRT5000 has an infrared emission tube and an infrared receiver tube.TCRT5000 Reflective Infrared Optical Sensor
NPR 75.00 -
This sensor uses an infrared emitted diode combined with an infrared phototransistor to detect the reflected infrared signal. Ideal for sensing black-to-white transitions or can be used to detect nearby objects (.5-1cm)
QRD 1114 (Optical Detector / Photo-transistor)
NPR 99.00 -
The TTP223 is a touch pad detector IC which offers 1 touch key. The touching
detection IC is designed for replacing traditional direct button key with diverse pad size.
Capacitive touch allows electronics to sense when your finger is within a few millimetres
of a surface to simulate a button “press” just like how the pushbutton works. Capacitive
sensing may be used in any place where low to no force human touch sensing is
desirable.TTP223B Digital Touch Sensor
NPR 250.00 -
TMP36 is a wide range, low power temperature sensor that outputs an analog voltage that is proportional to the ambient temperature.
TMP36 Temperature Sensor
NPR 250.00 -
A passive infrared sensor (PIR sensor) is an electronic sensor that measures infrared (IR) light radiating from objects in its field of view. They are most often used in PIR-based motion detectors.
For most of our Arduino projects that need to detect when a person has left or entered the area, or has approached, HC-SR501 PIR sensors are a great choice. They are low power and low cost, pretty rugged, have a wide lens range, easy to interface with and are insanely popular among hobbyists.
HC-SR501 PIR sensor has three output pins VCC, Output and Ground as shown in the diagram below. It has a built-in voltage regulator so it can be powered by any DC voltage from 4.5 to 12 volts, typically 5V is used. Other than this, there are a couple options you have with your PIR.
PIR Sensor HC-SR501
NPR 250.00 -
-
- Detection angle about 60 degrees, it is sensitive to the flame spectrum.
- Accuracy adjustable
- Operating voltage 3.3V-5V
- With a mounting screw hole
- Comparator chip LM393 ,it is stable.
- Flame detection distance, lighter flame test can be triggered within 0.8m, if the intensity of flame is high , the detection distance will be increased.
IR Infrared Flame Detection Sensor Module
NPR 320.00 -
The vibration sensor module based on the vibration sensor SW-420 and Comparator LM393 is used to detect vibrations. The threshold can adjust using an on-board potentiometer. During no vibration, the sensor provides Logic Low and when the vibration is detected, the sensor provides Logic High.
Vibration Sensor Module
NPR 350.00 -
-22%
Barometric Pressure sensor measures the absolute pressure of the air around it. This pressure varies with both the air and altitude. Depending upon the interpretation of the data, changes in the weather can be monitored, altitude can be measured, and any task can be done that requires the accurate pressure measurement.
BMP 180 (Pressure Sensor)
NPR 350.00 -
Specifications:
Material: ABS
Dimension: approx. 27 x 14 x 8(mm)
Switch pattern: N/O normally open, alarm-on-broken
Voltage: 100V DC Rated power: 10W
Actuation distance: 15-25mm Wire lead: 24 Awg, about 350mm long
Mounting method: SMD (by screws or double-sided tapes)
Recommendations in application: wooden door, window
Features:
Easy installation
Reliable performance
Good characteristic of abrasion-proof
Best Choice for you to protect family
There are two types of reed switches: “normally open” reed switches and “normally closed” reed switches. The metal reeds on a normally open switch stay open when there is no magnet near the switch. In the presence of a magnetic field, the contacts of a normally-open reed switch will close. A normally-closed reed switch is closed when it is not near a magnet; as a magnet is brought close to it, a normally-closed switch will open
Wired Door Window Sensor Magnetic Switch
NPR 400.00 -
HX711 is an electronic scale module, whose working principle is to convert the measured changes in resistance value changes, through the conversion circuit into electrical output. The module communicates with the host computer through TTL 232.
HX711 Dual-Channel Weighing Sensor Module
NPR 400.00 -
The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data.
Temperature Humidity Sensor DHT- 11
NPR 410.00 -
Heart rate data can be really useful whether you’re designing an exercise routine, studying your activity or anxiety levels or just want your shirt to blink with your heart beat. The problem is that heart rate can be difficult to measure. Luckily, the Pulse Sensor Amped can solve that problem!
Also, it sips power with just 4mA current draw at 5V so it’s great for mobile applications.
Heart Rate Sensor / Pulse Sensor
NPR 440.00 -
Ultrasonic Sensor HC-SR04 is great for all kind of projects that need distance measurements, avoiding obstacles as examples. HC-SR04 provides 2cm-400cm non-contact measurement function, the ranging accuracy can reach to 3mm. The modules include ultrasonic transmitters, receiver and control circuit.
Ultrasonic module distance sensor-HC-SR04
NPR 440.00 -
Water Level Sensor is easy-to-use, cost effective high level/drop recognition sensor, which is obtained by having a series of parallel wires exposed traces measured droplets/water volume in order to determine the water level.
Water Sensor
NPR 449.00 -
This is a simple water sensor can be used to detect soil moisture when the soil moisture deficit module outputs a high level, and vice versa output low. Use this sensor produced an automatic plant waterer device, so that the plants in your garden without people to manage.
Soil Hygrometer Detection Sensor Module
NPR 450.00 -
Accurate sensor to measure AC/DC current up to 20A. The sensor can even measure high AC mains current and is still isolated from the measuring part due to integrated hall sensor. The board operates on 5V. ACS712 current sensor operates from 5V and outputs analog voltage proportional to current measured on the sensing terminals. You can simple use a microcontroller ADC to read the values.
20A Hall Current Sensor ACS712-20A
NPR 480.00 -
Works great with our HX711 Load Cell (Weight) Amplifier board for Arduino.
Build your own electronic scale using the power of Arduino to create added features like recording weight or let “something” happen when a specific weight is reached like opening a relay.
Load Cell Sensor Resistance Strain 20kg
NPR 490.00 -
Gas Sensor(MQ5) module is useful for gas leakage detection (in home and industry). It is suitable for detecting H2, LPG, CH4, CO, Alcohol. Due to its high sensitivity and fast response time, measurements can be taken as soon as possible. The sensitivity of the sensor can be adjusted by using the potentiometer.
Gas Sensor(MQ5)
NPR 500.00 -
A float switch is a device used to sense the level of liquid within a tank. Products can be used for drinking fountains, water heaters, solar, air conditioners, humidifiers, bathroom equipment, vending machines, etc. This is a mini float switch. Contains no mercury.
Water level sensor (vertical)
NPR 550.00 -
It is a MAX6675 thermocouple which is a cold junction compensation, linearity coorection, thermocouple break detection ADC Serial K-type thermocouple, its temperature resolution capability is 0.25 Degree, cold unctioncompensatrion range is -20 to +80’C, wide operqating range 3.0 to 5.5 V.
Thermocouple Temperature Sensor
NPR 550.00 -
This Liquefied Petroleum Gas (LPG) sensor is suitable for sensing LPG (composed of mostly propane and butane) concentrations in the air. It can detect gas concentrations anywhere from 200 to 10000ppm. This sensor has a high sensitivity and fast response time. The sensor’s output is an analog resistance. The drive circuit is very simple; all you need to do is power the heater coil with 5V, add a load resistance, and connect the output to an ADC.
LPG Gas Sensor (MQ6)
NPR 550.00 -
Gas Sensor(MQ2) module is useful for gas leakage detection (home and industry). It is suitable for detecting H2, LPG, CH4, CO, Alcohol, Smoke or Propane. Due to its high sensitivity and fast response time, measurement can be taken as soon as possible. The sensitivity of the sensor can be adjusted by potentiometer.
Smoke Gas Sensor (MQ2)
NPR 550.00 -
This is Carbon Monoxide sensor is suitable for sensing CO concentrations in the air. The MQ-7 can detect CO-gas concentrations anywhere from 20 to 2000ppm.This sensor has a high sensitivity and fast response time. The sensor’s output is an analog resistance. The drive circuit is very simple; all you need to do is power the heater coil with 5V, add a load resistance, and connect the output to an ADC.
Carbon Monoxide Sensor (MQ7 | MQ-7)
NPR 550.00 -
This hydrogen gas sensor is suitable for sensing hydrogen concentrations in the air. It can detect hydrogen gas concentrations anywhere from 100-10000ppm. This sensor has a high sensitivity and fast response time. The sensor’s output is an analog resistance. The drive circuit is very simple; all you need to do is power the heater coil with 5V, add a load resistance, and connect the output to an ADC.
Hydrogen Gas Sensor (MQ8)
NPR 550.00 -
This gas sensor for monitoring indoor air qualit. it is suitable for sensing NH3, NOx, alcohol, Benzene, smoke and CO2 in the air. The MQ-135 can detect NH3 and Alcohol gas concentrations anywhere from 10-300ppm and Benzene from 10-1000ppm. This sensor has a high sensitivity and fast response time. The sensitivity of the sensor can be adjusted by potentiometer.
Gas Sensor (MQ135)
NPR 550.00 -
Gas Sensor(MQ9) module is useful for gas leakage detection (in home and industry). It is suitable for detecting LPG, CO, CH4. Due to its high sensitivity and fast response time, measurements can be taken as soon as possible. The sensitivity of the sensor can be adjusted by using the potentiometer.
Gas Sensor (MQ9)
NPR 550.00 -
Widely used in motor speed detection, pulse-counting, any position, possesses 2 road testing.
Two Way Velocimetry Sensor Module XD 211
NPR 550.00 -
MQ4 Methane Gas Sensor detects the concentration of methane gas in the air and ouputs its reading as an analog voltage. The concentration sensing range of 300 ppm to 10,000 ppm is suitable for leak detection. For example, the sensor could detect if someone left a gas stove on but not lit.
Methane / LPG Sensor (MQ4)
NPR 550.00 -
MQ3 is one of the most commonly used sensors in the MQ sensor series. It is a Metal Oxide Semiconductor (MOS) type of sensor. Metal oxide sensors are also known as Chemiresistors, because sensing is based on the change of resistance of the sensing material when exposed to alcohol.
Alcohol Level Sensor(MQ3)
NPR 580.00 -
The Proximity Switch is an Inductive Proximity Sensor Detection Switch with PNP normally open transistor switch, also known as Inductive sensor or metal sensor. It operates within a power supply voltage range of DC 6V to 36V. This Switch Module contains high frequency oscillations, a detection circuit, an amplifier circuit, a circuit solution, and an output circuit. It can be widely used in various applications like: – Automatic control industry for detection, controlling and non-contact switching, Paper making, Light industry for limiting station, Orientation taking count and many more.
Proximity Sensor
NPR 580.00 -
3-Axis Digital Accelerometer is the key part in projects like orientation detection, gesture detection and Motion detection.
Digital Accelerometer ADXL 345
NPR 599.00 -
The MAX30102 is an integrated pulse oximetry and heart-rate monitor biosensor module. It includes internal LEDs, photodetectors, optical elements, and low-noise electronics with ambient light rejection. The MAX30102 provides a complete system solution to ease the design-in process for mobile and wearable devices.The MAX30102 operates on a single 1.8V power supply and a separate 5.0V power supply for the internal LEDs. Communication is through a standard I2C-compatible interface. The module can be shut down through software with zero standby current, allowing the power rails to remain powered at all times.
MAX30102 stop and heart beat sensor
NPR 600.00 -
The ADXL335 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product
measures acceleration with a minimum full-scale range of ±3 g.
It can measure the static acceleration of gravity in tilt-sensing
applications, as well as dynamic acceleration resulting from
motion, shock, or vibration.The user selects the bandwidth of the accelerometer using the
CX, CY, and CZ capacitors at the XOUT, YOUT, and ZOUT pins.
Bandwidths can be selected to suit the application, with a
range of 0.5 Hz to 1600 Hz for the X and Y axes, and a range
of 0.5 Hz to 550 Hz for the Z axis.
The ADXL335 is available in a small, low profile, 4 mm ×
4 mm × 1.45 mm, 16-lead, plastic lead frame chip scale package
(LFCSP_LQ).FEATURES
3-axis sensing
Small, low profile package: 4 mm × 4 mm × 1.45 mm LFCSP
Low power : 350 μA (typical)
Single-supply operation: 1.8 V to 3.6 V
10,000 g shock survival
Excellent temperature stability
BW adjustment with a single capacitor per axis
RoHS/WEEE lead-free compliantAnalog accelerometer ADXL 335 (5V ready triple-axis with +-3g analog out))
NPR 600.00 -
This sensor sits in line with your water line and contains a pinwheel sensor to measure how much liquid has moved through it. There’s an integrated magnetic hall effect sensor that outputs an electrical pulse with every revolution. The hall effect sensor is sealed from the water pipe and allows the sensor to stay safe and dry.
Water Flow Sensor YF-S201
NPR 680.00 -
The TCS3200 programmable color light-to-frequency converter combines configurable silicon photodiodes and a current-to-frequency converter on a single monolithic CMOS integrated circuit. The output is a square wave (50% duty cycle) with frequency directly proportional to light intensity (irradiance). The TCS3200 reads an 8×8 array of photodiodes.
TCS 3200 (Color Sensor)
NPR 680.00 -
This sealed anti-rust digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings, so that only one wire (and ground) needs to be connected from a central microprocessor.
Waterproof Temperature Sensor (DS18B20)
NPR 700.00 -
-7%
The sensor contains a accelerometer and a gyro in a single chip. It is very accurate, as it contains 16-bits analog to digital conversion hardware for each channel.
MPU6050 sensor module is complete 6-axis Motion Tracking Device. It combines 3-axis Gyroscope, 3-axis Accelerometer and Digital Motion Processor all in small package. Also, it has additional feature of on-chip Temperature sensor. It has I2C bus interface to communicate with the microcontrollers.
Accelerometer + Gyro (MPU 6050)
NPR 700.00 -
The SMB130 is a 28 pin DIP module that includes all necessary components for a 13.56 MHz RFID Mifare, aside from a PCB antenna.
RFID Sensor 13.6 MHz +1 RFID Chain+1RFID Card
NPR 700.00 -
This module is a soil moisture detector sensor module + it has corrosion resistance probe which are compatible with the Arduino. This soil moisture sensor can read the amount of the moisture present in the surrounding soil.This soil moisture arduino compatible sensor uses the two probe to pass the current through the soil, as if in the soil more water is present than that soil will conduct the electricity more easily like less resistance will be offered and if the soil is dry than that soil will offer more resistance and soil conduct electricity will be poor. This Moisture Sensor can be used to detect the moisture of soil or judge if there is water around the sensor, let the plants in your garden reach out for human help. They can be very to use, just insert it into the soil and then read it. With help of this sensor, it will be realizable to make the plant remind you. if there is requirement of water or not. This module requires input supply voltage of 3.3 – 5VDC and its working current is less than 20mA. This soil humidity detection module includes a potentiometer and soil moisture thresholds.
Soil Moisture Sensor and Soil Detector Module Soil Moisture Test Soil Moisture Test Corrosion Resistance Probe for Arduino
NPR 750.00 -
-19%
Take your sonar outside – great for all weather robots! The XL-MaxSonar-WRMA1 ignores smaller targets and only reports the range to target with the largest acoustic return. This is our most advanced weather resistant sensor designed for target detection and ranging outdoors or in tank or bin applications.
Waterproof ultrasonic sensor
NPR 890.00
BreadFruit Electronics | | Buy latest Arduino, Sensors, Raspberry Pi, ICs, Resistors and other electronic components in Nepal
