Modules

Default sorting
Show
16
  • Quick View
    (0)
    Modules

    4 line screen 1602 Arduino 1602 I2C interface
    The Arduino IIC LCD1602 / I2C interface adapter plate without LCD screen
    1602 screen needs seven IO mouth to drive up.


    i2c LCD 1602/2004 Adapter Plate

    NPR 350.00
  • Quick View
    (0)
    Modules

    This module integrates DHT11 sensor and other required components on a small PCB.  The DHT11 sensor includes a resistive-type humidity measurement component, an NTC temperature measurement component and a high-performance 8-bit microcontroller inside, and provides calibrated digital signal output.  

    Note: The cable is not included in the pack

    Temperature Humidity Sensor DHT- 11 Module

    NPR 500.00
  • Quick View
    (0)
    Modules

    LDR sensor module is used to detect the intensity of light. It is associated with both analog output pin and digital output pin labelled as AO and DO respectively on the board. When there is light, the resistance of LDR will become low according to the intensity of light.

    LDR Sensor Module

    NPR 350.00
  • Quick View
    (0)
    Modules

    The Motor Driver Module is based on the popular L298 dual full-bridge driver. What does that mean? It means that, using this module, your gadget could control the speed and direction of two DC motors up to 40V 3A! 

    L298 Motor Driver Module

    NPR 700.00
  • Quick View
    (0)
    Modules

    TCRT5000 sensors constantly emit infrared infrared emitting diodes, infrared rays emitted when reflected or not reflected but the intensity is not big enough, the infrared receiver has been in the off state, then the output of the module is low, indicating diode remains off state.

    TCRT5000 IR Infrared Line Track Follower Sensor Obstacle Avoidance Module

    NPR 120.00
  • Quick View
    (0)
    Modules

    This MP3 module is a small and low cost MP3 module with an amplifier output directly to the speaker.

     The module can be used as a stand alone module with attached battery, speaker and push buttons or used in combination with an Arduino UNO or any other with RX/TX capabilities.

    MP3 WAV Player Module (Micro SD)

    NPR 420.00
  • Quick View
    (0)
    Modules

    Features:

    • Mini DC to DC 12V-24V to 5V 3A
    • Output 1.8V, 2.5V, 3.3V, 5V, 9V, 12V

    Stepdown Power Supply Module (Buck Converter)

    NPR 250.00
  • Quick View
    (0)
    Modules

    The rain sensor module is an easy tool for rain detection. It can be used as a
    switch when raindrop falls through the raining board and also for measuring rainfall
    intensity. The module features, a rain board and the control board that is separate for
    more convenience, power indicator LED and an adjustable sensitivity though a
    potentiometer. The analog output is used in detection of drops in the amount of rainfall.
    Connected to 5V power supply, the LED will turn on when induction board has no rain
    drop, and DO output is high. When dropping a little amount water, DO output is low, the
    switch indicator will turn on. Brush off the water droplets, and when restored to the initial
    state, outputs high level. 

    Raindrops Sensor Module MH-RD

    NPR 350.00
  • Quick View
    (0)
    Modules

    This is one of the simplest mp3 player module for electronics enthusiasts. Simply insert a MicroSD card, power up the board and play any song/audio.

    Supports mp3 format audio files. 

    Connect a speaker and an earphone to the board and enjoy your audio.

    The circuit board has an inbuilt 2W mono amplifier. 

    MP3 Decoder Module

    NPR 550.00
  • Quick View
    (0)
    Modules

    This is a DIY metal detector kit parts. You need solder it by yourself. 

    Metal Detector Module

    NPR 600.00
  • Quick View
    (0)
    Modules
    • Simple to Use, Auto Calibration
    • Output Status Indicator LED
    • Easy to replace mechanical key outputs

    TTP224 4-Channel Digital Touch Sensor Module Capacitive Touch Switch

    NPR 300.00
  • Quick View
    (0)
    Modules
    • This is 3.3V/5V FPM10A Fingerprint Reader Sensor Module
    • Optical Fingerprint Reader Sensor Module For Arduino Locks Serial Communication Interface

    FPM10A Fingerprint Reader Sensor Module (3.3V/5V)

    NPR 1,800.00
  • Quick View
    (0)
    Modules

    A solenoid valve is an electromechanically operated valve. The valve is controlled by an electric current through a solenoid: in the case of a two-port valve the flow is switched on or off; in the case of a three-port valve, the outflow is switched between the two outlet ports. Solenoid valves are the most frequently used control elements in fluidics. Their tasks are to shut off, release, dose, distribute or mix fluids. They are found in many application areas. Solenoids offer fast and safe switching, high reliability, long service life, good medium compatibility of the materials used, low control power and compact design.

    Solenoid Valve (0.5″ 12V)

    NPR 1,350.00
  • Quick View
    (0)
    Modules

    This module is based on the I2C light-to-digital converter TSL2561 to transform light intensity to a digital signal. Different from the traditional analog light sensor, this digital module features a selectable light spectrum range due to its dual light-sensitive diodes: infrared and full spectrum.

    You can switch among three detection modes to take your readings. They are infrared mode, full spectrum, and human visible mode. When running under the human visible mode, this sensor will give you readings just close to your eye feelings.

    Digital Light Sensor Module (TSL2561)

    NPR 800.00
  • Quick View
    (0)
    Modules

    Line Tracking Smart Robot Car Chassis Set

    NPR 1,800.00
  • Quick View
    (0)
    Modules
    Case Color: Blue
    Detection range: Voltage: 3v-7v error 0.1v Current :0-2.5A error 0.01A.
    It’s suitable for factories, laboratories and personal use.

    Digital USB Mobile Power Charging Current Voltage Tester Doctor Voltmeter Ammeter

    NPR 400.00