Modules

Default sorting
Show
16
  • Quick View
    (0)
    Modules

    The TCA9548A is an I2C multiplexer that allows up to 8 devices with the same I2C address to be hooked up to an MCU or permits up to 8 separate I2C buses to be controlled.

    TCA9548A I2C 8 Channel Multiplexer Module

    NPR 300.00
  • Quick View
    (0)
    Sensors

    The vibration sensor module based on the vibration sensor SW-420 and Comparator LM393 is used to detect vibrations. The threshold can adjust using an on-board potentiometer. During no vibration, the sensor provides Logic Low and when the vibration is detected, the sensor provides Logic High.

     

    Vibration Sensor Module

    NPR 350.00
  • Quick View
    (0)
    Modules

    The rain sensor module is an easy tool for rain detection. It can be used as a
    switch when raindrop falls through the raining board and also for measuring rainfall
    intensity. The module features, a rain board and the control board that is separate for
    more convenience, power indicator LED and an adjustable sensitivity though a
    potentiometer. The analog output is used in detection of drops in the amount of rainfall.
    Connected to 5V power supply, the LED will turn on when induction board has no rain
    drop, and DO output is high. When dropping a little amount water, DO output is low, the
    switch indicator will turn on. Brush off the water droplets, and when restored to the initial
    state, outputs high level. 

    Raindrops Sensor Module MH-RD

    NPR 350.00
  • Quick View
    (0)
    Modules

    LDR sensor module is used to detect the intensity of light. It is associated with both analog output pin and digital output pin labelled as AO and DO respectively on the board. When there is light, the resistance of LDR will become low according to the intensity of light.

    LDR Sensor Module

    NPR 350.00
  • Quick View
    (0)
    Modules

    4 line screen 1602 Arduino 1602 I2C interface
    The Arduino IIC LCD1602 / I2C interface adapter plate without LCD screen
    1602 screen needs seven IO mouth to drive up.


    i2c LCD 1602/2004 Adapter Plate

    NPR 350.00
  • Quick View
    (0)
    Modules

    This capacitive touch sensor module uses the TTP229 integrated circuit, making it easy to add capacitive touch input for projects. It features 16 sensitive touch pads that make an ideal replacement for the traditional keypads.

    16 Channel Digital Capacitive Switch Touch Sensor Module

    NPR 350.00
  • -30%
    Quick View
    (0)
    Modules

    Tilt Switch Sensor Module

    NPR 350.00
  • Quick View
    (0)
    Modules

    p+/p- input/output interface, the same combination when the battery voltage, capacity, internal resistance should be matched well, battery voltage around the rated voltage of 3.7v, combination without output, after the completion of voltage charging activation by  7.4v.

    2S 8A Li-ion 7.4v 8.4V 18650 BMS PCM 15A Peak Current Battery Protection Board

    NPR 400.00
  • Quick View
    (0)
    Modules
    Case Color: Blue
    Detection range: Voltage: 3v-7v error 0.1v Current :0-2.5A error 0.01A.
    It’s suitable for factories, laboratories and personal use.

    Digital USB Mobile Power Charging Current Voltage Tester Doctor Voltmeter Ammeter

    NPR 400.00
  • -9%
    Quick View
    (0)
    Modules

    Lots of robotic projects need a joystick. This module offers an affordable solution
    to that. The Joystick module is similar to analog joysticks found in gamepads. It is made
    by mounting two potentiometers at a 90 degrees angle. The potentiometers are
    connected to a short stick centered by springs.

    Joystick Module

    NPR 400.00
  • Quick View
    (0)
    Modules

    This MP3 module is a small and low cost MP3 module with an amplifier output directly to the speaker.

     The module can be used as a stand alone module with attached battery, speaker and push buttons or used in combination with an Arduino UNO or any other with RX/TX capabilities.

    MP3 WAV Player Module (Micro SD)

    NPR 420.00
  • Quick View
    (0)
    Modules

    Features:

    •          This module uses a professional microphone amplifier IC.
    •          Low noise
    •          Small size
    •          High sensitivity
    •          Fixed gain in 20db
    •          Voltage: 3-5V
    •          OUT output: default output analog signal.

    MAX9812 Microphone Amplifier Module

    NPR 450.00
  • Quick View
    (0)
    Modules

    It is a GX-16 3-Pin Metal Aviation Plug Male and Female Panel Connector. The connector is mostly used to transmit signals or power. This type of connector is used in places where a watertight connection is required, and also in harsh environments.

    The connector is ideal for panel mounting and has got separate male and female pins. The cable can be soldered directly on them

    GX-16 3 pin

    NPR 450.00
  • Quick View
    (0)
    Modules

    This module integrates DHT11 sensor and other required components on a small PCB.  The DHT11 sensor includes a resistive-type humidity measurement component, an NTC temperature measurement component and a high-performance 8-bit microcontroller inside, and provides calibrated digital signal output.  

    Note: The cable is not included in the pack

    Temperature Humidity Sensor DHT- 11 Module

    NPR 500.00
  • Quick View
    (0)
    Modules

    A pair of infrared sensor and a 21 keyed remote control.

    Infrared Sensor + Remote Control

    NPR 500.00
  • Quick View
    (0)
    Modules

    This is one of the simplest mp3 player module for electronics enthusiasts. Simply insert a MicroSD card, power up the board and play any song/audio.

    Supports mp3 format audio files. 

    Connect a speaker and an earphone to the board and enjoy your audio.

    The circuit board has an inbuilt 2W mono amplifier. 

    MP3 Decoder Module

    NPR 550.00