-
-20%
The Arduino MEGA ADK is a microcontroller board based on the ATmega2560 (datasheet). It has a USB host interface to connect with Android based phones, based on the MAX3421e IC.
Arduino Mega ADK
NPR 4,755.00 -
The Arduino Motor Shield allows you to easily control motor direction and speed using an Arduino. By allowing you to simply address Arduino pins, it makes it very simple to incorporate a motor into your project. It also allows you to be able to power a motor with a separate power supply of up to 12v.
Arduino L293D Motor Driver Shield
NPR 700.00 -
-
Prototyping area for soldering connectors, circuitry or sensors.
-
Onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run
-
Works with Arduino UNO, Duemilanove, Diecimila, Leonardo or ADK/Mega R3 or higher. ADK/Mega R2 or lower are not supported.
-
SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card
-
Real time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years
Arduino Data Logger Shield (Micro SD Slot + RTC)
NPR 1,699.00 -
-
Works with the Uno! This prototyping shield is the best out there (well, we think so, at least). It works with UNO, NG, Diecimila and Duemilanove Arduinos.
Arduino Breadboard Shield
NPR 450.00 -
This relay module allows you to combine the processing power of the Arduino to devices that use higher current and voltage. It does so by providing four relays that are rated for 10A at 125VAC.
There are four relays that each provide dry contact outputs. That is to say that each relay provides a common (COM) , normally open (NO) and a normally closed (NC) terminal.
4- Channel Arduino Relay Shield
NPR 650.00 -
It is the Chinese clone of the Arduino Mega 2560 and is capable of doing all the functions.
The MEGA 2560 is designed for more complex projects. With 54 digital I/O pins, 16 analog inputs and a larger space for your sketch it is the recommended board for 3D printers and robotics projects. This gives your projects plenty of room and opportunities.The MEGA 2560 is designed for more complex projects. With 54 digital I/O pins, 16 analog inputs and a larger space for your sketch it is the recommended board for 3D printers and robotics projects. This gives your projects plenty of room and opportunities.
Arduino Mega 2560 (Chinese)
NPR 1,550.00 -
Arduino Sensor Shield is a board used to connect sensors, servos, LCD with the Arduino Board without the requirement of soldering. Using Arduino Board separately you’ll find a few of 5V and GND connections. Arduino Sensor Shield gives you the ability of dedicated one 5V and GND connection for every Arduino signal pin.
Arduino Sensor Shield
NPR 500.00 -
Feature:
High sensitivity for low-light operation.
Low operating voltage for embedded application.
Standard SCCB interface compatible with I2C interface.
Raw RGB, RGB (GRB4:2:2, RGB565/555/444),YUV(4:2:2) and YCbCr(4:2:2)output format.More Features:
Support VGA, CIF and from CIF to 40 x 30 format.
Vario Pixel method for sub-sampling.
Auto Image Control: AEC, AGC, AWB, ABF, ABLC.
Image Quality Control: Color saturation, hue, gamma, sharpness and anti-blooming.
ISP includes noise reduction and defect correction.
Support image scaling.
Lens shading correction.
Flicker 50/60Hz auto detection.
Color saturation level auto adjust.
Edge enhancement level auto adjust.
De-noise level auto adjust.VGA OV7670 Camera Module Lens for Arduino
NPR 800.00 -
The Arduino Micro is essentially a shrunk-down (1.9″ × 0.7″) version of the Arduino Leonardo: it is a microcontroller board based on the ATmega32U4 running at 16 MHz with 24 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs). This board ships with the male header pins soldered in.
Arduino Micro Pro R3
NPR 1,900.00 -
-20%
Item specifics
Supply Voltage:
Driver Shield V2
Condition:
New
is_customized:
Yes
Model Number:
Driver Shield V2
Type:
Driver Shield V2
Application:
Driver Shield V2
Dissipation Power:
Driver Shield V2
Package:
DIP
Operating Temperature:
Driver Shield V216-channel PWM/Servo Shield
NPR 1,120.00 -
Specification:
The main chip: ISD1820
Size: 38mm * 42.5mm
Working voltage: DC 3 ~ 5V
Loudspeaker: 8Ω, 0.5W.
Features:
1.An easy to use 10 seconds of voice recording
2.High-quality, natural voice restored
3.Can be used as propaganda module
4.With looping, jog playback, single-pass play function
5.Available single-chip control
6.This module can directly drive a small speaker 8 ohm 0.5WPower supply :3-5V, which can be accessed pin power; Audio recording control mode: the key to control or microcontroller, IO has drawn the line of control; Buttons control audio recording method of operation: REC button: record button, you can press and hold the recording, release the button to stop recording; RLAYE key: trigger mode playback, press will play this whole speech; PLAYL key: jog mode playback, press and hold until playback, release to stop playback; RPL Jumper: loop mode control, loop playback; FT Jumper: direct control, microphone voice through the speaker can playback;
Arduino Voice Record Sound Module ISD1820 with Loudspeaker
NPR 700.00 -
An open-source firmware and development kit that helps you to prototype your IOT product within a few Lua script lines.
Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled.
NodeMCU CP2102 (Arduino Like Hardware)
NPR 1,250.00 -
-
-8%
Inspired From Arduino Starter Kit Multi-language.(Arduino.cc)
Quickly and easily get started with learning electronics using the Arduino Starter Kit. No prior experience is required, as the kits introduce both coding and electronics through fun, engaging, and hands-on projects.Arduino Starter Kit
NPR 5,500.00 -
NodeMCU is a Firmware on ESP8266. It is ESP-12 and it is basically a System on Chip (SoC). It has Lua based firmware which is used to develop IoT based applications. It is easy to work on this inexpensive SoC and make our device smart.
NodeMCU CH340 (Arduino Like Hardware)
NPR 900.00 -
MKR WAN 1300 is a powerful board that combines the functionality of the MKR Zero and LoRa / LoRaWANTM connectivity. It is the ideal solution for makers wanting to design IoT projects with minimal previous experience in networking having a low power device.
Arduino MKR WAN 1300 (LoRa® connectivity)
NPR 17,125.00
BreadFruit Electronics | | Buy latest Arduino, Sensors, Raspberry Pi, ICs, Resistors and other electronic components in Nepal
