-
Arduino’s tiniest form factor with Bluetooth® and Bluetooth® Low Energy and embedded inertial sensor.
Arduino Nano 33 BLE
NPR 7,705.00 -
-
The Nano Every is Arduino’s 5V compatible board in the smallest available form factor: 45x18mm!
Arduino Nano Every
NPR 4,920.00 -
-
The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) orATmega168 (Arduino Nano 2.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. The Nano was designed and is being produced by Gravitech.
- • Automatic reset during program download
- • Power OK blue LED
- • Green (TX), red (RX) and orange (L) LED
- • Auto sensing/switching power input
- • Small mini-B USB for programming and serial monitor
- • ICSP header for direct program download
- • Standard 0.1” spacing DIP (breadboard friendly)
- • Manual reset switch
Arduino Nano with cable
NPR 1,535.00 -
Microcontroller:ATmega328
Operating Voltage:3.3V or 5V (depending on model)
Input Voltage:3.35 -12 V (3.3V model)or 5 – 12 V (5V model)
Digital I/O Pins:14 (of which 6 provide PWM output)
Analog Input Pins:6
DC Current per I/O Pin:40 mA
Flash Memory32 kB (of which 0.5 kB used by bootloader)
SRAM:2 kB
EEPROM:1 kB
Clock Speed:8 MHz (3.3V model) or 16 MHz (5V model)
Arduino Pro Mini
NPR 899.00 -
The Arduino Pro Mini is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers.
Arduino Pro Mini Kit
NPR 5,000.00 -
Arduino Sensor Shield is a board used to connect sensors, servos, LCD with the Arduino Board without the requirement of soldering. Using Arduino Board separately you’ll find a few of 5V and GND connections. Arduino Sensor Shield gives you the ability of dedicated one 5V and GND connection for every Arduino signal pin.
Arduino Sensor Shield
NPR 500.00 -
-8%
Inspired From Arduino Starter Kit Multi-language.(Arduino.cc)
Quickly and easily get started with learning electronics using the Arduino Starter Kit. No prior experience is required, as the kits introduce both coding and electronics through fun, engaging, and hands-on projects.Arduino Starter Kit
NPR 5,500.00 -
-
Protect your Arduino UNO R3 with the transparent and stylish casing.
Arduino Uno Casing (Transparent Box)
NPR 300.00 -
-1%
The Uno R3 CH340G ATmega328p Development Board is the low-cost version of the popular Uno R3 Arduino. It is assembled with the CH340 USB to Serial converter chip, instead of using an Atmega16U2 chip.
Arduino UNO R3 Mega328p CH340 Development Board
NPR 1,690.00 -
Use it to connect Arduino Uno, Arduino Mega 2560, Arduino 101 or any board with the USB female A port of your computer.
USB cable type A/B Standard USB 2.0 cable.Arduino Uno/Mega USB Cable
NPR 200.00 -
Specification:
The main chip: ISD1820
Size: 38mm * 42.5mm
Working voltage: DC 3 ~ 5V
Loudspeaker: 8Ω, 0.5W.
Features:
1.An easy to use 10 seconds of voice recording
2.High-quality, natural voice restored
3.Can be used as propaganda module
4.With looping, jog playback, single-pass play function
5.Available single-chip control
6.This module can directly drive a small speaker 8 ohm 0.5WPower supply :3-5V, which can be accessed pin power; Audio recording control mode: the key to control or microcontroller, IO has drawn the line of control; Buttons control audio recording method of operation: REC button: record button, you can press and hold the recording, release the button to stop recording; RLAYE key: trigger mode playback, press will play this whole speech; PLAYL key: jog mode playback, press and hold until playback, release to stop playback; RPL Jumper: loop mode control, loop playback; FT Jumper: direct control, microphone voice through the speaker can playback;
Arduino Voice Record Sound Module ISD1820 with Loudspeaker
NPR 700.00 -
-16%
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins , 16 analog inputs, 4 UARTs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller.
Genuine Arduino Mega 2560 R3(Italy)
NPR 5,400.00 -
Hot
The Arduino open-sourced IDE drivers can be downloaded for free and we have created a download and installation tutorial for the Windows XP platform.
Features of the Arduino UNO:
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 32 KB of which 0.5 KB used by bootloader
- SRAM: 2 KB (ATmega328)
- EEPROM: 1 KB (ATmega328)
- Clock Speed: 16 MHz
Genuine Arduino UNO R3 (Italy) with 1 Year Warranty
NPR 2,690.00
BreadFruit Electronics | | Buy latest Arduino, Sensors, Raspberry Pi, ICs, Resistors and other electronic components in Nepal
