Best Seller Items
Featured Items
-
Power/Voltage: DC 12V
THis 12V Solenoid lock has a slug with a slanted cut and a good mounting bracket. It’s basically an electronic lock, designed for a basic cabinet, safe or door. When 9-12 VDC is applied, the slug pulls in so it doesn’t stick out and the door can be opened. It does not use any power in this state. It is very easy to install for automatic door lock systems like electric door lock with the mounting board. This solenoid in particular is nice and strong.
Solenoid 12V DC Electric Lock Assembly
NPR 1,790.00 -
GP2Y1010AU0F is a dust sensor by optical sensing
system.
An infrared emitting diode (IRED) and an phototransistor are diagonally arranged into this device.
It detects the reflected light of dust in air.
Especially, it is effective to detect very fine particle
like the cigarette smoke.
In addition it can distinguish smoke from house dust
by pulse pattern of output voltage.GP2Y1010AU0F is a dust sensor by optical sensing system
An infrared emitting diode (IRED) and an phototransistor are diagonally arranged into this device
It detects the reflected light of dust in air.
Especially, it is effective to detect very fine particle like the cigarette smoke
In addition it can distinguish smoke from house dust by pulse pattern of output voltage
Compact, thin package (46.0 × 30.0 × 17.6 mm)
Low consumption current (Icc: MAX. 20 mA)
The presence of dust can be detected by the photometry of only one pulse
Enable to distinguish smoke from house dust
Lead-free and RoHS directive compliant
Compliant with RoHS directive (2002/95/EC)Dust sensor Smoke Particle Sensor With Cable GP2Y1010AU0F
NPR 1,790.00 -
Using IO port trig trigger location, to the high level signal of at least 10us module automatically sends 8 40khz fang bo, automatic detecting whether a signal return. A signal return, a high level is output through the io port echo, the time duration of the high level is ultrasonic from launch to return. The test distance = (high level time * speed of sound (340m/s)) /2ranging, the measured object area of not less than 0. 5 square meters and the plane as required to smooth, otherwise affect the measurement results.
JSN-SR40T Ultrasonic Ranging Sensor Module
NPR 1,800.00 -
-
- This is 3.3V/5V FPM10A Fingerprint Reader Sensor Module
- Optical Fingerprint Reader Sensor Module For Arduino Locks Serial Communication Interface
FPM10A Fingerprint Reader Sensor Module (3.3V/5V)
NPR 1,800.00 -
-25%
Description:
- Item Name: 720P HD Camera for Rc drone
- Resolution: 1280x720P HD photo and video
- Compatible model: for Syma X5C X5
720P Wired Camera for Drones
NPR 1,875.00 -
The Arduino Micro is essentially a shrunk-down (1.9″ × 0.7″) version of the Arduino Leonardo: it is a microcontroller board based on the ATmega32U4 running at 16 MHz with 24 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs). This board ships with the male header pins soldered in.
Arduino Micro Pro R3
NPR 1,900.00 -
-
- Product Model: FSR402:
- Size: thick (12.5 mm) in diameter, 1/2 “for the active field
FSR is Force Sensitive Resistor, allowing you to detect the physical pressure, extrusion, and weight.They are simple using, low cost.
FSR is delimited by two layer, as the pressure increases, the activity of these elements point will touch the semiconductor, making resistance smaller
Force Sensitive Resistor Sensor (FSR402)
NPR 1,950.00 -
Microcontroller
ATmega32u4
Operating Voltage
5V
Input Voltage (recommended)
7-12V
Input Voltage (limits)
6-20V
Digital I/O Pins
20
PWM Channels
7
Analog Input Channels
12
DC Current per I/O Pin
40 mA
DC Current for 3.3V Pin
50 mA
Flash Memory
32 KB (ATmega32u4) of which 4 KB used by bootloader
SRAM
2.5 KB (ATmega32u4)
EEPROM
1 KB (ATmega32u4)
Clock Speed
16 MHz
Length
68.6 mm
Width
53.3 mm
Weight
20g
Arduino Leonardo
NPR 1,950.00 -
The MPU-9250 is a 9-axis motion tracking device that combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer and a Digital Motion Processor™ (DMP) all in a small board available as a pin-compatible upgrade from the MPU-6515. With its dedicated I2C sensor bus, the MPU-9250 directly provides complete 9-axis MotionFusion™ output. The MPU-9250 MotionTracking device, with its 9-axis integration, on-chip MotionFusion™, and run-time calibration firmware, enables manufacturers to eliminate the costly and complex selection, qualification, and system level integration of discrete devices, guaranteeing optimal motion performance for consumers. MPU-9250 is also designed to interface with multiple non-inertial digital sensors, such as pressure sensors, on its auxiliary I2C port.
MPU 9250 9-Axis Attitude + Gyro + Accelerator + Magnetometer Sensor
NPR 2,000.00 -
-
The Official Raspberry Pi power supply
Easily interchangeable heads for the UK, US, EU and Australia you can now use your Pi in all four corners of the world!
- +5.1V 2.5A output provides all the power your Pi will need
- 1.5m cable gives your Pi room to manoeuvre
- Micro USB connection goes straight into your Pi’s power supply
Official Raspberry Pi 3 Universal Power Supply
NPR 2,000.00 -
-20%
A name badge tells others that you’re a professional.At a conference, mixer or other event with a large group of people, a name badge is much more professional then a sticky, and is much easier for others to read. And remember, wearing your logo is a form of branding.
LED Name Badge
NPR 2,000.00 -
The NEO-6 module series brings the high performance to the miniature NEO form factor. It has been designed with low power consumption and low costs in mind. Intelligent power management is a breakthrough for low-power applications.
It can track up to 22 satellites on 50 channels and achieves the industry’s highest level of sensitivity i.e. -161 dB tracking, while consuming only 45mA supply current. The u-blox 6 positioning engine also boasts a Time-To-First-Fix (TTFF) of under 1 second.
Neo-6M-0-001 V2 with ceramic antenna (GPS Module)
NPR 2,200.00 -
