Best Seller Items
Featured Items
-
This is 60 rpm small metal geared motor which runs on 6V-9V power supply. Highly used for robotics and electronic projects.
60 rpm geared motor
NPR 799.00 -
64 Pin DIP IC Socket Base Adaptor.
QUICK OVERVIEW 64 pins. JDEC compliant. Molded notch for proper orientation. Easy to insert and remove ICs. Features: 64 pins. JDEC compliant. Molded notch for proper orientation. Easy to insert and remove ICs. Package Included: 1 x 64 Pin DIP IC Socket Base Adaptor(5 pcs).64 Pin DIP IC Socket Base Adaptor
NPR 50.00 -
-
Outer diameter: 6 mm
-
Wavelength: 650nm
-
Working Voltage: 5 volts
- 5 mW
650 nm space 5mW 5v Laser Dot Diode
NPR 75.00 -
-
-
Cylindrical shape and with 2.3mm diameter shaft and 2 pin connectors.
6V to 9V high speed large torque DC Motor
NPR 400.00 -
-25%
Description:
- Item Name: 720P HD Camera for Rc drone
- Resolution: 1280x720P HD photo and video
- Compatible model: for Syma X5C X5
720P Wired Camera for Drones
NPR 1,875.00 -
The LM78LXX series of three terminal positive regulators is available with several fixed output voltages making them useful in a wide range of applications. When used as a zener diode/resistor combination replacement, the LM78LXX usually results in an effective output impedance improvement of two orders of magnitude, and lower quiescent current. These regulators can provide local on card regulation, eliminating the distribution problems associated with single point regulation. The voltages available allow the LM78LXX to be used in logic systems, instrumentation, HiFi, and other solid state electronic equipment.
The 78L15 IC gives an output voltage of 15V. It is available in the plastic TO-92 (Z) package
78L15 voltage regulator IC (TO-92)
NPR 25.00 -
-
-
This is a 9V battery holder with on/off switch and wires leads, that is commonly used in LED lighting, electronic toys and all kinds of mini electronic products. The holder is a two-piece unit, that slides together to safely secure your battery.
9v Battery holder with switch
NPR 450.00 -
-7%
The sensor contains a accelerometer and a gyro in a single chip. It is very accurate, as it contains 16-bits analog to digital conversion hardware for each channel.
MPU6050 sensor module is complete 6-axis Motion Tracking Device. It combines 3-axis Gyroscope, 3-axis Accelerometer and Digital Motion Processor all in small package. Also, it has additional feature of on-chip Temperature sensor. It has I2C bus interface to communicate with the microcontrollers.
Accelerometer + Gyro (MPU 6050)
NPR 700.00 -
-
Features:
– Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
– Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
– Highest shrink ratio – shrinks to 1/3 original size
– Shrinks at 257 deg F / 125 deg C
– Operating temperature range of -40 deg C to 110 deg C
– UL 224Adhesive Lined Heat Shrink Tubing
NPR 5.00 -
MQ3 is one of the most commonly used sensors in the MQ sensor series. It is a Metal Oxide Semiconductor (MOS) type of sensor. Metal oxide sensors are also known as Chemiresistors, because sensing is based on the change of resistance of the sensing material when exposed to alcohol.
Alcohol Level Sensor(MQ3)
NPR 580.00 -
A alligator clip (also crocodile clip or spring clip) is a simple mechanical device for creating a temporary electrical connection, and is named for its resemblance to an alligator‘s or crocodile‘s jaws. Functioning much like a spring-loaded clothespin, the clip’s tapered, serrated jaws are forced together by a spring to grip an object. This set contains small alligator clip and the wire already connected to it.
Alligator Clip with wire
NPR 50.00 -
The ADXL335 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product
measures acceleration with a minimum full-scale range of ±3 g.
It can measure the static acceleration of gravity in tilt-sensing
applications, as well as dynamic acceleration resulting from
motion, shock, or vibration.The user selects the bandwidth of the accelerometer using the
CX, CY, and CZ capacitors at the XOUT, YOUT, and ZOUT pins.
Bandwidths can be selected to suit the application, with a
range of 0.5 Hz to 1600 Hz for the X and Y axes, and a range
of 0.5 Hz to 550 Hz for the Z axis.
The ADXL335 is available in a small, low profile, 4 mm ×
4 mm × 1.45 mm, 16-lead, plastic lead frame chip scale package
(LFCSP_LQ).FEATURES
3-axis sensing
Small, low profile package: 4 mm × 4 mm × 1.45 mm LFCSP
Low power : 350 μA (typical)
Single-supply operation: 1.8 V to 3.6 V
10,000 g shock survival
Excellent temperature stability
BW adjustment with a single capacitor per axis
RoHS/WEEE lead-free compliantAnalog accelerometer ADXL 335 (5V ready triple-axis with +-3g analog out))
NPR 600.00 -
Features:
- 100% brand new and high quality.
- Anti-static and anti-magnetic.
- Precision tweezers set with fine tip.
- Suitable for precision engineering industries.
Anti Static Tweezers Six piece sets
NPR 775.00 -
-
Works with the Uno! This prototyping shield is the best out there (well, we think so, at least). It works with UNO, NG, Diecimila and Duemilanove Arduinos.
Arduino Breadboard Shield
NPR 450.00 -
-
Prototyping area for soldering connectors, circuitry or sensors.
-
Onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run
-
Works with Arduino UNO, Duemilanove, Diecimila, Leonardo or ADK/Mega R3 or higher. ADK/Mega R2 or lower are not supported.
-
SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card
-
Real time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years
Arduino Data Logger Shield (Micro SD Slot + RTC)
NPR 1,699.00 -
-
The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller.
It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.
Warning: Unlike most Arduino boards, the Arduino Due board runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board.
Arduino Due
NPR 3,899.00 -
The Arduino Ethernet Shield connects your Arduino to the internet in mere minutes. Just plug this module onto your Arduino board, connect it to your network with an RJ45 cable (not included) and follow a few simple instructions to start controlling your world through the internet. As always with Arduino, every element of the platform – hardware, software and documentation – is freely available and open-source. This means you can learn exactly how it’s made and use its design as the starting point for your own circuits. Hundreds of thousands of Arduino boards are already fueling people’s creativity all over the world, everyday. Join us now, Arduino is you!
Requires an Arduino board (not included)
Operating voltage 5V (supplied from the Arduino Board)
Ethernet Controller: W5100 with internal 16K buffer
Connection speed: 10/100Mb
Connection with Arduino on SPI portArduino ethernet Shield
NPR 4,400.00 -
The Arduino Motor Shield allows you to easily control motor direction and speed using an Arduino. By allowing you to simply address Arduino pins, it makes it very simple to incorporate a motor into your project. It also allows you to be able to power a motor with a separate power supply of up to 12v.
Arduino L293D Motor Driver Shield
NPR 700.00 -
Microcontroller
ATmega32u4
Operating Voltage
5V
Input Voltage (recommended)
7-12V
Input Voltage (limits)
6-20V
Digital I/O Pins
20
PWM Channels
7
Analog Input Channels
12
DC Current per I/O Pin
40 mA
DC Current for 3.3V Pin
50 mA
Flash Memory
32 KB (ATmega32u4) of which 4 KB used by bootloader
SRAM
2.5 KB (ATmega32u4)
EEPROM
1 KB (ATmega32u4)
Clock Speed
16 MHz
Length
68.6 mm
Width
53.3 mm
Weight
20g
Arduino Leonardo
NPR 1,950.00 -
Microcontroller
ATmega168 or ATmega328V
Operating Voltage
2.7-5.5 V
Input Voltage
2.7-5.5 V
Digital I/O Pins
14
PWM Channels
6
Analog Input Channels
6
DC Current per I/O Pin
40 mA
Flash Memory
16 KB (of which 2 KB used by bootloader)
SRAM
1 KB
EEPROM
512 bytes
Clock Speed
8 MHz
Arduino Lilypad
NPR 600.00 -
It is the Chinese clone of the Arduino Mega 2560 and is capable of doing all the functions.
The MEGA 2560 is designed for more complex projects. With 54 digital I/O pins, 16 analog inputs and a larger space for your sketch it is the recommended board for 3D printers and robotics projects. This gives your projects plenty of room and opportunities.The MEGA 2560 is designed for more complex projects. With 54 digital I/O pins, 16 analog inputs and a larger space for your sketch it is the recommended board for 3D printers and robotics projects. This gives your projects plenty of room and opportunities.
Arduino Mega 2560 (Chinese)
NPR 1,550.00 -
-20%
The Arduino MEGA ADK is a microcontroller board based on the ATmega2560 (datasheet). It has a USB host interface to connect with Android based phones, based on the MAX3421e IC.
Arduino Mega ADK
NPR 4,755.00 -
The Arduino MEGA 2560 is designed for projects that require more I/O lines, more sketch memory and more RAM. With 54 digital I/O pins, 16 analog inputs and a larger space for your sketch it is the recommended board for 3D printers and robotics projects.
Arduino Mega Starter Kit
NPR 9,500.00 -
The Arduino Micro is essentially a shrunk-down (1.9″ × 0.7″) version of the Arduino Leonardo: it is a microcontroller board based on the ATmega32U4 running at 16 MHz with 24 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs). This board ships with the male header pins soldered in.
Arduino Micro Pro R3
NPR 1,900.00 -
MKR WAN 1300 is a powerful board that combines the functionality of the MKR Zero and LoRa / LoRaWANTM connectivity. It is the ideal solution for makers wanting to design IoT projects with minimal previous experience in networking having a low power device.
Arduino MKR WAN 1300 (LoRa® connectivity)
NPR 17,125.00 -
The Arduino MKR WiFi 1010 is the easiest point of entry to basic IoT and pico-network application design. Whether you are looking at building a sensor network connected to your office or home router, orif you want to create a Bluetooth® Low Energy device sending data to a cellphone, the MKR WiFi 1010 is your one-stop-solution for many of the basic IoT application scenarios.
Arduino MKR WiFi 1010
NPR 13,310.00 -
Arduino MKR1000 is a powerful board that combines the functionality of the Zero and the Wi-Fi Shield. It is the ideal solution for makers wanting to design IoT projects with minimal previous experience in networking.
Arduino MKR1000
NPR 14,035.00 -
Arduino’s tiniest form factor with Bluetooth® and Bluetooth® Low Energy and embedded inertial sensor.
Arduino Nano 33 BLE
NPR 7,705.00 -
-
The Nano Every is Arduino’s 5V compatible board in the smallest available form factor: 45x18mm!
Arduino Nano Every
NPR 4,920.00 -
-
The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) orATmega168 (Arduino Nano 2.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. The Nano was designed and is being produced by Gravitech.
- • Automatic reset during program download
- • Power OK blue LED
- • Green (TX), red (RX) and orange (L) LED
- • Auto sensing/switching power input
- • Small mini-B USB for programming and serial monitor
- • ICSP header for direct program download
- • Standard 0.1” spacing DIP (breadboard friendly)
- • Manual reset switch
Arduino Nano with cable
NPR 1,535.00 -
Microcontroller:ATmega328
Operating Voltage:3.3V or 5V (depending on model)
Input Voltage:3.35 -12 V (3.3V model)or 5 – 12 V (5V model)
Digital I/O Pins:14 (of which 6 provide PWM output)
Analog Input Pins:6
DC Current per I/O Pin:40 mA
Flash Memory32 kB (of which 0.5 kB used by bootloader)
SRAM:2 kB
EEPROM:1 kB
Clock Speed:8 MHz (3.3V model) or 16 MHz (5V model)
Arduino Pro Mini
NPR 899.00 -
The Arduino Pro Mini is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers.
Arduino Pro Mini Kit
NPR 5,000.00 -
Arduino Sensor Shield is a board used to connect sensors, servos, LCD with the Arduino Board without the requirement of soldering. Using Arduino Board separately you’ll find a few of 5V and GND connections. Arduino Sensor Shield gives you the ability of dedicated one 5V and GND connection for every Arduino signal pin.
Arduino Sensor Shield
NPR 500.00 -
-8%
Inspired From Arduino Starter Kit Multi-language.(Arduino.cc)
Quickly and easily get started with learning electronics using the Arduino Starter Kit. No prior experience is required, as the kits introduce both coding and electronics through fun, engaging, and hands-on projects.Arduino Starter Kit
NPR 5,500.00 -
-
Protect your Arduino UNO R3 with the transparent and stylish casing.
Arduino Uno Casing (Transparent Box)
NPR 300.00 -
-1%
The Uno R3 CH340G ATmega328p Development Board is the low-cost version of the popular Uno R3 Arduino. It is assembled with the CH340 USB to Serial converter chip, instead of using an Atmega16U2 chip.
Arduino UNO R3 Mega328p CH340 Development Board
NPR 1,690.00 -
Use it to connect Arduino Uno, Arduino Mega 2560, Arduino 101 or any board with the USB female A port of your computer.
USB cable type A/B Standard USB 2.0 cable.Arduino Uno/Mega USB Cable
NPR 200.00
