Best Seller Items
Featured Items
-
2N3904 transistor
NPR 5.00The 2N3904 is a common NPN bipolar junction transistor used for general-purpose low-power amplifying or switching applications. It is designed for low current and power, medium voltage, and can operate at moderately high speeds. This transistor is low-cost, widely available and sufficiently robust to be of use by experimenters and electronics hobbyists.
-
BC547 transistor
NPR 5.00BC547 is an NPN bi-polar junction transistor. A transistor, stands for transfer of resistance, is commonly used to amplify current. A small current at its base controls a larger current at collector & emitter terminals.
-
IRF 520 MOSFET
NPR 100.00This N-Channel enhancement mode silicon gate power field
effect transistor is an advanced power MOSFET designed,
tested, and guaranteed to withstand a specified level of
energy in the breakdown avalanche mode of operation. All of
these power MOSFETs are designed for applications such
as switching regulators, switching convertors, motor drivers,
relay drivers, and drivers for high power bipolar switching
transistors requiring high speed and low gate drive power. -
-
-
-
-
-
-
TTP223B Digital Touch Sensor
NPR 250.00The TTP223 is a touch pad detector IC which offers 1 touch key. The touching
detection IC is designed for replacing traditional direct button key with diverse pad size.
Capacitive touch allows electronics to sense when your finger is within a few millimetres
of a surface to simulate a button “press” just like how the pushbutton works. Capacitive
sensing may be used in any place where low to no force human touch sensing is
desirable. -
MPU 9250 9-Axis Attitude + Gyro + Accelerator + Magnetometer Sensor
NPR 2,000.00The MPU-9250 is a 9-axis motion tracking device that combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer and a Digital Motion Processor™ (DMP) all in a small board available as a pin-compatible upgrade from the MPU-6515. With its dedicated I2C sensor bus, the MPU-9250 directly provides complete 9-axis MotionFusion™ output. The MPU-9250 MotionTracking device, with its 9-axis integration, on-chip MotionFusion™, and run-time calibration firmware, enables manufacturers to eliminate the costly and complex selection, qualification, and system level integration of discrete devices, guaranteeing optimal motion performance for consumers. MPU-9250 is also designed to interface with multiple non-inertial digital sensors, such as pressure sensors, on its auxiliary I2C port.
-
-
-
D2SBA60 Bridge Rectifier
NPR 50.00D2SBA60 is a 600V 1.5A Flat Bridge Rectifier. It is a full wave rectifier.
-
Zener diode 8.2 volts
NPR 5.00A Zener diode is a particular type of diode that, unlike a normal one, allows current to flow not only from its anode to its cathode, but also in the reverse direction, when the Zener voltage is reached. Zener diodes have a highly doped p-n junction.
Zener diodes are used for voltage regulation, as reference elements, surge suppressors, and in switching applications and clipper circuits.
-
Zener diode 2.4 volts
NPR 5.00A Zener diode is a particular type of diode that, unlike a normal one, allows current to flow not only from its anode to its cathode, but also in the reverse direction, when the Zener voltage is reached. Zener diodes have a highly doped p-n junction.
Zener diodes are used for voltage regulation, as reference elements, surge suppressors, and in switching applications and clipper circuits.
