• (0)

    Gas Sensor (MQ135)

    NPR 550.00
    This gas sensor for monitoring indoor air qualit. it is suitable for sensing NH3, NOx, alcohol, Benzene, smoke and CO2 in the air. The MQ-135 can detect NH3 and Alcohol gas concentrations anywhere from 10-300ppm and Benzene from 10-1000ppm. This sensor has a high sensitivity and fast response time. The sensitivity of the sensor can be adjusted by potentiometer.
  • (0)

    Gas Sensor (MQ9)

    NPR 550.00

     Gas Sensor(MQ9) module is useful for gas leakage detection (in home and industry). It is suitable for detecting LPG, CO, CH4. Due to its high sensitivity and fast response time, measurements can be taken as soon as possible. The sensitivity of the sensor can be adjusted by using the potentiometer.

  • (0)

    Two Way Velocimetry Sensor Module XD 211

    NPR 550.00

    Widely used in motor speed detection, pulse-counting, any position, possesses 2 road testing.

  • (0)

    SanDisk Ultra micro SD Card 16 GB (For Raspberry Pi)

    NPR 550.00
    • SanDisk Ultra microSDHC UHS-1 (Micro SD Card)
    • 16 GB Menory
    • 98MBps transfer speed
    • UHS 1

      Can be used for Raspberry pi and other purpose.

  • (0)

    Methane / LPG Sensor (MQ4)

    NPR 550.00

    MQ4 Methane Gas Sensor detects the concentration of methane gas in the air and ouputs its reading as an analog voltage. The concentration sensing range of 300 ppm to 10,000 ppm is suitable for leak detection. For example, the sensor could detect if someone left a gas stove on but not lit.

  • (0)

    Alcohol Level Sensor(MQ3)

    NPR 580.00

    MQ3 is one of the most commonly used sensors in the MQ sensor series. It is a Metal Oxide Semiconductor (MOS) type of sensor. Metal oxide sensors are also known as Chemiresistors, because sensing is based on the change of resistance of the sensing material when exposed to alcohol.

  • (0)

    Proximity Sensor

    NPR 580.00

    The Proximity Switch is an Inductive Proximity Sensor Detection Switch with PNP normally open transistor switch, also known as Inductive sensor or metal sensor. It operates within a power supply voltage range of DC 6V to 36V. This Switch Module contains high frequency oscillations, a detection circuit, an amplifier circuit, a circuit solution, and an output circuit. It can be widely used in various applications like: – Automatic control industry for detection, controlling and non-contact switching, Paper making, Light industry for limiting station, Orientation taking count and many more.

  • (0)

    Digital Accelerometer ADXL 345

    NPR 599.00

    3-Axis Digital Accelerometer is the key part in projects like orientation detection, gesture detection and Motion detection. 

  • (0)

    MAX30102 stop and heart beat sensor

    NPR 600.00
    The MAX30102 is an integrated pulse oximetry and heart-rate monitor biosensor module. It includes internal LEDs, photodetectors, optical elements, and low-noise electronics with ambient light rejection. The MAX30102 provides a complete system solution to ease the design-in process for mobile and wearable devices.

    The MAX30102 operates on a single 1.8V power supply and a separate 5.0V power supply for the internal LEDs. Communication is through a standard I2C-compatible interface. The module can be shut down through software with zero standby current, allowing the power rails to remain powered at all times.

  • (0)

    XL 4015 Buck Module

    NPR 600.00

    The DC-DC module based on LM2596 advocate current to 3.0A, but only to 1.8A.However, being introduced module adds a heatsink, using high-power devices.This module can easily reach 4A, 50W, add heat sink circumstances can reach 75W

  • (0)

    Metal Detector Module

    NPR 600.00

    This is a DIY metal detector kit parts. You need solder it by yourself. 

  • (0)

    Analog accelerometer ADXL 335 (5V ready triple-axis with +-3g analog out))

    NPR 600.00

    The ADXL335 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product
    measures acceleration with a minimum full-scale range of ±3 g.
    It can measure the static acceleration of gravity in tilt-sensing
    applications, as well as dynamic acceleration resulting from
    motion, shock, or vibration.

    The user selects the bandwidth of the accelerometer using the
    CX, CY, and CZ capacitors at the XOUT, YOUT, and ZOUT pins.
    Bandwidths can be selected to suit the application, with a
    range of 0.5 Hz to 1600 Hz for the X and Y axes, and a range
    of 0.5 Hz to 550 Hz for the Z axis.
    The ADXL335 is available in a small, low profile, 4 mm ×
    4 mm × 1.45 mm, 16-lead, plastic lead frame chip scale package
    (LFCSP_LQ). 

    FEATURES

    3-axis sensing

    Small, low profile package: 4 mm × 4 mm × 1.45 mm LFCSP

    Low power : 350 μA (typical)

    Single-supply operation: 1.8 V to 3.6 V
    10,000 g shock survival

    Excellent temperature stability

    BW adjustment with a single capacitor per axis
    RoHS/WEEE lead-free compliant 

  • (0)

    Arduino Lilypad

    NPR 600.00

    Microcontroller

    ATmega168 or ATmega328V

    Operating Voltage

    2.7-5.5 V

    Input Voltage

    2.7-5.5 V

    Digital I/O Pins

    14

    PWM Channels

    6

    Analog Input Channels

    6

    DC Current per I/O Pin

    40 mA

    Flash Memory

    16 KB (of which 2 KB used by bootloader)

    SRAM

    1 KB

    EEPROM

    512 bytes

    Clock Speed

    8 MHz

  • (0)

    DC 3V 450mA Micro 370 Air Pump / Fishing Pump / Oxygen Pump

    NPR 600.00

    DC 3V 450mA Micro 370 Air Pump / Fishing Pump / Oxygen Pump

  • (0)

    Temperature Humidity Sensor DHT-22 Module

    NPR 620.00

    DHT22 capacitive humidity sensing digital temperature and humidity module is one that contains the compound has been calibrated digital signal output of the temperature and humidity sensors. Application of a dedicated digital modules collection technology and the temperature and humidity sensing technology, to ensure that the product has high reliability and excellent long-term stability.