Sensors

Default sorting
Show
16
  • Quick View
    (0)
    Sensors

    Reed switches are magnetically-actuated electrical switches (not magically-actuated, though it seems that way sometimes). When the body of the switch is exposed to a magnetic field – like a magnet or even a strong electrical current – two ferrous materials inside pull together, the connection closes, and current can flow. In absence of a magnetic field, the switch opens as does the circuit it’s a part of.

    Reed Switch

    NPR 30.00
  • Quick View
    (0)
    Sensors

    This Grove-125KHz RFID Reader is a module used to read uem4100 RFID card information with two output formats: Uart and Wiegand. It has a sensitivity with maximum 7cm sensing distance. There is also the electronic brick version of this module.

    RFID Sensor 125 KHZ

    NPR 1,200.00
  • Quick View
    (0)
    Sensors

    The SMB130 is a 28 pin DIP module that includes all necessary components for a 13.56 MHz RFID Mifare, aside from a PCB antenna.

    RFID Sensor 13.6 MHz +1 RFID Chain+1RFID Card

    NPR 700.00
  • Quick View
    (0)
    Sensors

    RFID Silicon Wristband 125 KHz

    NPR 320.00
  • Quick View
    (0)
    Sensors

    An assortment of the most common sensors used in electronics.
    9 sensors and 3 additional components to interface with the “analog world.” 

    Sensor pack 900 (pre-kitted) by adafruit

    NPR 3,600.00
  • Quick View
    (0)
    Sensors

     Gas Sensor(MQ2) module is useful for gas leakage detection (home and industry). It is suitable for detecting H2, LPG, CH4, CO, Alcohol, Smoke or Propane. Due to its high sensitivity and fast response time, measurement can be taken as soon as possible. The sensitivity of the sensor can be adjusted by potentiometer.

    Smoke Gas Sensor (MQ2)

    NPR 550.00
  • Quick View
    (0)
    Sensors

    This is a simple water sensor can be used to detect soil moisture when the soil moisture deficit module outputs a high level, and vice versa output low. Use this sensor produced an automatic plant waterer device, so that the plants in your garden without people to manage.

    Soil Hygrometer Detection Sensor Module

    NPR 450.00
  • Quick View
    (0)
    Sensors

    This module is a soil moisture detector sensor module + it has corrosion resistance probe which are compatible with the Arduino. This soil moisture sensor can read the amount of the moisture present in the surrounding soil.This soil moisture arduino compatible sensor uses the two probe to pass the current through the soil, as if in the soil more water is present than that soil will conduct the electricity more easily like less resistance will be offered and if the soil is dry than that soil will offer more resistance and soil conduct electricity will be poor. This Moisture Sensor can be used to detect the moisture of soil or judge if there is water around the sensor, let the plants in your garden reach out for human help. They can be very to use, just insert it into the soil and then read it. With help of this sensor, it will be realizable to make the plant remind you. if there is requirement of water or not. This module requires input supply voltage of 3.3 – 5VDC and its working current is less than 20mA. This soil humidity detection module includes a potentiometer and soil moisture thresholds.

    Soil Moisture Sensor and Soil Detector Module Soil Moisture Test Soil Moisture Test Corrosion Resistance Probe for Arduino

    NPR 750.00
  • -22%
    Quick View
    (0)
    Sensors

    Model:   SCT-013-000

    Rated input current:0-100A.

    Output: 0-50mA or 0-1V.

    Split Core Current Sensor Transformer SCT013

    NPR 1,560.00
  • Quick View
    (0)
    Sensors
    The TCRT5000 are reflective sensors which include an infrared emitter and phototransistor in a leaded package which blocks visible light. The package includes two mounting clips.
    TCRT5000 sensor works with the general infrared sensor, like a sense of a TCRT5000 has an infrared emission tube and an infrared receiver tube.

    TCRT5000 Reflective Infrared Optical Sensor

    NPR 75.00
  • Quick View
    (0)
    Sensors

    The TCS3200 programmable color light-to-frequency converter combines configurable silicon photodiodes and a current-to-frequency converter on a single monolithic CMOS integrated circuit. The output is a square wave (50% duty cycle) with frequency directly proportional to light intensity (irradiance).  The TCS3200 reads an 8×8 array of photodiodes.

    TCS 3200 (Color Sensor)

    NPR 680.00
  • Quick View
    (0)
    Sensors

    The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data.

    Temperature Humidity Sensor DHT- 11

    NPR 410.00
  • Quick View
    (0)
    Sensors

    It is a MAX6675 thermocouple which is a cold junction compensation, linearity coorection, thermocouple break detection ADC Serial K-type thermocouple, its temperature resolution capability is 0.25 Degree, cold unctioncompensatrion range is -20 to +80’C, wide operqating range 3.0 to 5.5 V.

    Thermocouple Temperature Sensor

    NPR 550.00
  • Quick View
    (0)
    Sensors

    Thyristor is a solid-state semiconductor device with four layers of alternating N and P-type material. It acts exclusively as a bistable switch, conducting when the gate receives a current trigger, and continuing to conduct while the voltage across the device is not reversed (forward-biased). It is one of the several controllable semi conductor devices that can act either like a switch, rectifier or as a voltage regulator.

    Thyristor / Thermistor

    NPR 30.00
  • Quick View
    (0)
    Sensors

    TMP36 is a wide range, low power temperature sensor that outputs an analog voltage that is proportional to the ambient temperature.

    TMP36 Temperature Sensor

    NPR 250.00
  • Quick View
    (0)
    Sensors

    Technical specification

    Supply: 5 V
    Power consumption: 0.4 to 1.0 mA
    Min. Ee irradiation: 0.35 mW/m2 typ.
    Angle of detection: 90
    Temperature range: -25 C to +85 C

    TSOP1838 IR Receiver

    NPR 40.00
  • Quick View
    (0)
    Sensors

    The TTP223 is a touch pad detector IC which offers 1 touch key. The touching
    detection IC is designed for replacing traditional direct button key with diverse pad size.
    Capacitive touch allows electronics to sense when your finger is within a few millimetres
    of a surface to simulate a button “press” just like how the pushbutton works. Capacitive
    sensing may be used in any place where low to no force human touch sensing is
    desirable.

    TTP223B Digital Touch Sensor

    NPR 250.00
  • Hot
    Quick View
    (0)
    Sensors

    Turbidity sensors is the use of optics , through the liquid solution and scattering rate of transmittance integrated to determine the turbidity case , since the amount of haze value is gradual , usually detected in a dynamic environment , the turbidity sensor acquisition value , the need for external control for AD conversion , the conversion to obtain the corresponding environment turbidity situation, so that the sensor can also need to produce a peripheral circuit detected in the system , with a waterproof probe , mainly used in washing machines, dishwashers and other equipment turbidity testing can also be used on electronic design, graduate design, electronic competition experiments and other applications.

    Turbidity Sensor

    NPR 3,500.00
  • Quick View
    (0)
    Sensors

    Widely used in motor speed detection, pulse-counting, any position, possesses 2 road testing.

    Two Way Velocimetry Sensor Module XD 211

    NPR 550.00
  • Quick View
    (0)
    Sensors

    Ultrasonic Sensor HC-SR04 is great for all kind of projects that need distance measurements, avoiding obstacles as examples. HC-SR04 provides 2cm-400cm non-contact measurement function, the ranging accuracy can reach to 3mm. The modules include ultrasonic transmitters, receiver and control circuit.

    Ultrasonic module distance sensor-HC-SR04

    NPR 440.00
  • Quick View
    (0)
    Sensors

    The vibration sensor module based on the vibration sensor SW-420 and Comparator LM393 is used to detect vibrations. The threshold can adjust using an on-board potentiometer. During no vibration, the sensor provides Logic Low and when the vibration is detected, the sensor provides Logic High.

     

    Vibration Sensor Module

    NPR 350.00
  • -50%
    Quick View
    (0)
    Sensors

    The GY-530 sensor has the VL53L0X sensor on board, with power management IC on board, the module can accept power arrange from 2.8V to 5V.

    The VL53L0X is a new generation Time-of-Flight (ToF) laser-ranging module housed in the smallest package on the market today, providing accurate distance measurement whatever the target reflectances unlike conventional technologies. It can measure absolute distances up to 2m, setting a new benchmark in ranging performance levels, opening the door to various new applications.
    The VL53L0X integrates a leading-edge SPAD array (Single Photon Avalanche Diodes) and embeds ST’s second generation FlightSenseTM patented technology.
    The VL53L0X’s 940nm VCSEL emitter (Vertical Cavity Surface-Emitting Laser), is totally invisible to the human eye, coupled with internal physical infrared filters, it enables longer ranging distance, higher immunity to ambient light and better robustness to cover-glass optical cross-talk.

    VL53L0X TIME OF FLIGHT DISTANCE SENSOR – 30 TO 1000MM GY-530

    NPR 1,200.00
  • Quick View
    (0)
    Sensors

    This sensor sits in line with your water line and contains a pinwheel sensor to measure how much liquid has moved through it. There’s an integrated magnetic hall effect sensor that outputs an electrical pulse with every revolution. The hall effect sensor is sealed from the water pipe and allows the sensor to stay safe and dry.

    Water Flow Sensor YF-S201

    NPR 680.00
  • Quick View
    (0)
    Sensors

    A float switch is a device used to sense the level of liquid within a tank. Products can be used for drinking fountains, water heaters, solar, air conditioners, humidifiers, bathroom equipment, vending machines, etc. This is a mini float switch. Contains no mercury.

    Water level sensor (vertical)

    NPR 550.00
  • Quick View
    (0)
    Sensors

    Water Level Sensor is easy-to-use, cost effective high level/drop recognition sensor, which is obtained by having a series of parallel wires exposed traces measured droplets/water volume in order to determine the water level.

    Water Sensor

    NPR 449.00
  • Quick View
    (0)
    Sensors

    This sealed anti-rust digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings, so that only one wire (and ground) needs to be connected from a central microprocessor.

    Waterproof Temperature Sensor (DS18B20)

    NPR 700.00
  • -19%
    Quick View
    (0)
    Sensors

    Take your sonar outside – great for all weather robots! The XL-MaxSonar-WRMA1 ignores smaller targets and only reports the range to target with the largest acoustic return. This is our most advanced weather resistant sensor designed for target detection and ranging outdoors or in tank or bin applications.

    Waterproof ultrasonic sensor

    NPR 890.00
  • Quick View
    (0)
    Sensors

    Specifications:

    Material: ABS

    Dimension: approx. 27 x 14 x 8(mm)

    Switch pattern: N/O normally open, alarm-on-broken

    Voltage: 100V DC Rated power: 10W

    Actuation distance: 15-25mm Wire lead: 24 Awg, about 350mm long

    Mounting method: SMD (by screws or double-sided tapes)

    Recommendations in application: wooden door, window


    Features:

    Easy installation

    Reliable performance

    Good characteristic of abrasion-proof

    Best Choice for you to protect family

    There are two types of reed switches: “normally open” reed switches and “normally closed” reed switches. The metal reeds on a normally open switch stay open when there is no magnet near the switch. In the presence of a magnetic field, the contacts of a normally-open reed switch will close. A normally-closed reed switch is closed when it is not near a magnet; as a magnet is brought close to it, a normally-closed switch will open

    Wired Door Window Sensor Magnetic Switch

    NPR 400.00