Best Seller Items
Featured Items
-
VL53L0X TIME OF FLIGHT DISTANCE SENSOR – 30 TO 1000MM GY-530
NPR 1,200.00The GY-530 sensor has the VL53L0X sensor on board, with power management IC on board, the module can accept power arrange from 2.8V to 5V.
The VL53L0X is a new generation Time-of-Flight (ToF) laser-ranging module housed in the smallest package on the market today, providing accurate distance measurement whatever the target reflectances unlike conventional technologies. It can measure absolute distances up to 2m, setting a new benchmark in ranging performance levels, opening the door to various new applications.
The VL53L0X integrates a leading-edge SPAD array (Single Photon Avalanche Diodes) and embeds ST’s second generation FlightSenseTM patented technology.
The VL53L0X’s 940nm VCSEL emitter (Vertical Cavity Surface-Emitting Laser), is totally invisible to the human eye, coupled with internal physical infrared filters, it enables longer ranging distance, higher immunity to ambient light and better robustness to cover-glass optical cross-talk. -
16-channel PWM/Servo Shield
NPR 1,120.00Item specifics
Supply Voltage:
Driver Shield V2
Condition:
New
is_customized:
Yes
Model Number:
Driver Shield V2
Type:
Driver Shield V2
Application:
Driver Shield V2
Dissipation Power:
Driver Shield V2
Package:
DIP
Operating Temperature:
Driver Shield V2 -
UV Photo Sensitive Dry Film for PCB (30cmX1m)
NPR 1,100.00Dry film is a polyester film coated with a polymer which is sensitive to ultraviolet light (Photoresist). It adheres by heat to the PCB and allows you to print circuits using any photolithography method. Once photosensitized, it is developed using an alkaline solution.It is widely used at the professional level on the PCB industry.
-
Raspberry Pi 4 Power Adapter
NPR 1,000.00A USB-C based power adapter for Raspbeery Pi 4 Model B.Specification:- 5.1V / 3.0A DC output
- 96-264Vac operating input range
- Short circuit, overcurrent and over temperature protection
- 1.5m 18 AWG captive cable with USB-C output connector
-
Syma X5C / X5 Drone Brushless Motor
NPR 999.00A package includes 1 Clockwise Motor and 1 Anti-clockwise Motor
Product Dimensions
5 x 0.5 x 0.3 inches -
Bluetooth Module HC-05
NPR 990.00HC-05 module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup. Serial port Bluetooth module is fully qualified Bluetooth V2.0+EDR (Enhanced Data Rate) 3Mbps Modulation with complete 2.4GHz radio transceiver and baseband.
-
Pi Cobbler B+ (Adafruit)
NPR 900.00The Raspberry Pi B+ / Pi 2 / Pi 3 / Pi 4 has landed on the Maker World as a 40-GPIO pinned, quad-USB ported, credit card-sized bomb of DIY joy. it’s probably a good time to upgrade your setup and accessorize using all of the Model B+’s / Pi 2’s / Pi 3 / Pi 4’s 40 pins.
That’s why we now carry the Adafruit Assembled Pi Cobbler Plus – Breakout and Cable for Raspberry Pi A+, B+, Pi 2, Pi 3, and Pi 4. It’s an add-on prototyping Pi Cobbler from Adafruit specifically designed for the B+ and Pi 2 that you can break out all those tasty power, GPIO, I2C, and SPI pins from the 40-pin header onto a solderless breadboard. This will make “cobbling together” prototypes with the Pi super easy.
Designed for use with Raspberry Pi Model A+/B+/Pi 2/Pi 3/Pi 4 only! No soldering is required!
-
-
HMC5883L Triple Axis Compass Magnetometer Sensor Gy271
NPR 900.00The GY-271 HMC5883L 3-axis Electronic Compass Module Magnetic Field Sensor is designed for low field magnetic sensing with a digital interface and it is perfect to give precise heading information. This compact sensor fits into small projects such as UAVs and robot navigation systems.
-
NodeMCU CH340 (Arduino Like Hardware)
NPR 900.00NodeMCU is a Firmware on ESP8266. It is ESP-12 and it is basically a System on Chip (SoC). It has Lua based firmware which is used to develop IoT based applications. It is easy to work on this inexpensive SoC and make our device smart.
-
Arduino Pro Mini
NPR 899.00Microcontroller:ATmega328
Operating Voltage:3.3V or 5V (depending on model)
Input Voltage:3.35 -12 V (3.3V model)or 5 – 12 V (5V model)
Digital I/O Pins:14 (of which 6 provide PWM output)
Analog Input Pins:6
DC Current per I/O Pin:40 mA
Flash Memory32 kB (of which 0.5 kB used by bootloader)
SRAM:2 kB
EEPROM:1 kB
Clock Speed:8 MHz (3.3V model) or 16 MHz (5V model)
-
Waterproof ultrasonic sensor
NPR 890.00Take your sonar outside – great for all weather robots! The XL-MaxSonar-WRMA1 ignores smaller targets and only reports the range to target with the largest acoustic return. This is our most advanced weather resistant sensor designed for target detection and ranging outdoors or in tank or bin applications.
-
USB Range Extender (USB – Ethernet Connector)
NPR 850.00Extend your USB connection plugging in any ethernet cable of any length.
-
TowerPro MG995 Metal Gear Servo Motor (180º Rotation) (55G)
NPR 850.00It has metal gears which makes it robust and reliable motors. These TowerPro MG995 Metal Gear Servo Motors are the high-speed servo motors with the mighty torque of 10 kg/cm.
The optimized performance and reliability of this servo have made it the favorite choice of many RC hobbyists.
The TowerPro MG995 High-Speed Digital Servo Motor rotates 90° in each direction making it 180° servo motor. It is a Digital Servo Motor which receives and processes PWM signal faster and better. It equips sophisticated internal circuitry that provides good torque, holding power, and faster updates in response to external forces.
They are packed within a tight sturdy plastic case which makes them water and dust resistant which is a very useful feature in RC planes, Boats, and RC Monster Trucks etc. It equips 3-wire JR servo plug which is compatible with Futaba connectors too.
-
MAX31865 RTD Platinum Resistance Temperature Detector Module (PT100 to PT1000)
NPR 850.00MAX31865 RTD Platinum Resistance Temperature Detector PT100 to PT1000
The MAX31865 is an easy-to-use thermistor-to-digital output converter optimized for platinum resistance temperature detectors (RTDs). The external resistor sets the RTD sensitivity, and the high precision Δ- Σ ADC converts the ratio of the RTD resistor to the reference resistor into a digital output. The MAX31865 has overvoltage protection up to ±45V and provides configurable RTD and cable open and short-circuit condition detection.
-
T-Cobbler Plus v2.2 Cable T-GPIO Expansion Board for Raspberry Pi
NPR 800.00Features:
- Durable product
- Made from good material
- Good product to use
