Best Seller Items
Featured Items
-
RGB LED White 5mm
NPR 20.00An LED light source made of red, green, and blue LEDs (RGB-LEDs) can provide the unique feature of color variability, allowing the user to select the desired color point of the lamp. The white light color accuracy required in the general illumination market is a challenge for LEDs.
-
RGB LED 5mm (Clear)
NPR 20.00Clear-lens ultra bright 5-mm RGB LEDs with four leads, common-anode configuration. The water-clear lens projects high brightness for visibility at a distance, but does not inherently provide color mixing like the diffused lens version does.
-
Mini On/Off Push-Button Switch
NPR 20.00Push once to turn on, push again to turn off, push again to turn the other side on, one last push and it’s off again! It’s basically a push-button toggle switch that connects and disconnects.
-
Self-Lock Micro On/Off Push Button Switch
NPR 20.00Push once to turn on, push again to turn off, push again to turn the other side on, one last push and it’s off again! It’s basically a push-button toggle switch that connects and disconnects.
-
Glass Fuse 10A
NPR 25.00Specification:
Rated Current: 10A
Max. Voltage: AC250V
Diameter: 5mm
Length: 20mm -
Glass Fuse 8A
NPR 25.00Specification:
Rated Current: 8A
Max. Voltage: AC250V
Diameter: 5mm
Length: 20mm -
78L15 voltage regulator IC (TO-92)
NPR 25.00The LM78LXX series of three terminal positive regulators is available with several fixed output voltages making them useful in a wide range of applications. When used as a zener diode/resistor combination replacement, the LM78LXX usually results in an effective output impedance improvement of two orders of magnitude, and lower quiescent current. These regulators can provide local on card regulation, eliminating the distribution problems associated with single point regulation. The voltages available allow the LM78LXX to be used in logic systems, instrumentation, HiFi, and other solid state electronic equipment.
The 78L15 IC gives an output voltage of 15V. It is available in the plastic TO-92 (Z) package
-
jumper cable(Wire) per metre
NPR 25.00It is a simple pair of connecting wire that can be cut according to the desire and used in making connections in the circuit. It can be used in both bread board and the perforated board.
-
-
-
Socket 9V (Battery Cap)
NPR 25.009 Volt battery connector with 6 inches red and black leads. Great for electronics and hobby projects or classroom use. Box Size: 1.00in (2.54cm) x 0.50in (1.27cm) x 0.25in (0.64cm) Recommended for ages 7 and older.
-
Micro USB Female
NPR 25.00This isn’t true panel mount but you could glue the black plastic shell into your project and then press-fit in the micro B connector. The 5-pins are much easier to solder than a surface mount connector
-
-
LDR Sensor
NPR 25.00Photo resistors, also known as light dependent resistors (LDR), are light sensitive devices most often used to indicate the presence or absence of light, or to measure the light intensity.
-
16 Pin IC Base
NPR 25.0016 Pin IC Socket base adaptor is a 16 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when required. The IC is placed on the socket at the time of use. This base acts as a removable IC holder.