• (0)

    Alcohol Level Sensor(MQ3)

    NPR 580.00

    MQ3 is one of the most commonly used sensors in the MQ sensor series. It is a Metal Oxide Semiconductor (MOS) type of sensor. Metal oxide sensors are also known as Chemiresistors, because sensing is based on the change of resistance of the sensing material when exposed to alcohol.

  • (0)

    Pizeo Buzzer

    NPR 90.00

    Piezo buzzers are simple devices that can generate basic beeps and tones. They work by using a piezo crystal, a special material that changes shape when voltage is applied to it. If the crystal pushes against a diaphragm, like a tiny speaker cone, it can generate a pressure wave which the human ear picks up as sound.

  • (0)

    9v Battery holder with switch

    NPR 450.00

    This is a 9V battery holder with on/off switch and wires leads, that is commonly used in LED lighting, electronic toys and all kinds of mini electronic products. The holder is a two-piece unit, that slides together to safely secure your battery.

  • (0)

    Genuine Arduino UNO R3 (Italy) with 1 Year Warranty

    NPR 2,690.00

    The Arduino open-sourced IDE drivers can be downloaded for free and we have created a download and installation tutorial for the Windows XP platform.

    Features of the Arduino UNO:

    • Microcontroller: ATmega328
    • Operating Voltage: 5V
    • Input Voltage (recommended): 7-12V
    • Input Voltage (limits): 6-20V
    • Digital I/O Pins: 14 (of which 6 provide PWM output)
    • Analog Input Pins: 6
    • DC Current per I/O Pin: 40 mA
    • DC Current for 3.3V Pin: 50 mA
    • Flash Memory: 32 KB of which 0.5 KB used by bootloader
    • SRAM: 2 KB (ATmega328)
    • EEPROM: 1 KB (ATmega328)
    • Clock Speed: 16 MHz
  • (0)

    Arduino Mega ADK

    NPR 4,755.00

    The Arduino MEGA ADK is a microcontroller board based on the ATmega2560 (datasheet). It has a USB host interface to connect with Android based phones, based on the MAX3421e IC.

  • (0)

    Arduino Breadboard Shield

    NPR 450.00

    Works with the Uno! This prototyping shield is the best out there (well, we think so, at least). It works with UNO, NG, Diecimila and Duemilanove Arduinos.

  • (0)

    USB To RS232 TTL Auto Converter Module

    NPR 480.00
    • This is a module used for ease of use compared to the bulky traditional serial (DB9) port.
    • 100% Brand new and high quality
    • Adopt imported controller RS232 TTL, which can stabilize the flash with high speed
    • 500mA self-recovery fuse for protection

    Two data transmission indicator can monitor data transfer status in real time
    Reserve 3.3V and 5V pin interface for easy operation
    The entire board is coated by the high quality transparent heat-shrinkable sleeve, making the PCB in insulation state from outside
    The electrostatic package ensures the board will not be damaged before use

  • (0)

    USB-ASP Adapter

    NPR 120.00

    Annoying that the programmer has 10 pins, while the Arduino boards only have 6 pins! That leads to a lot of loose wires and faulty connections. This 10 to 6 pin adapter for the USBASP avr programmer is guaranteed to solve this problem.

    Technical Specifications –
    No. of Pin on USBASP side: 10.
    No. of Pin on Device under programming side: 6.
    Connector type on USBASP side: Male.
    Connector type on Device under programming side: Female.

  • (0)

    TCS 3200 (Color Sensor)

    NPR 680.00

    The TCS3200 programmable color light-to-frequency converter combines configurable silicon photodiodes and a current-to-frequency converter on a single monolithic CMOS integrated circuit. The output is a square wave (50% duty cycle) with frequency directly proportional to light intensity (irradiance).  The TCS3200 reads an 8×8 array of photodiodes.

  • (0)

    LPG Gas Sensor (MQ6)

    NPR 550.00

    This Liquefied Petroleum Gas (LPG) sensor is suitable for sensing LPG (composed of mostly propane and butane) concentrations in the air. It can detect gas concentrations anywhere from 200 to 10000ppm. This sensor has a high sensitivity and fast response time. The sensor’s output is an analog resistance. The drive circuit is very simple; all you need to do is power the heater coil with 5V, add a load resistance, and connect the output to an ADC.

  • (0)

    Thyristor / Thermistor

    NPR 30.00

    Thyristor is a solid-state semiconductor device with four layers of alternating N and P-type material. It acts exclusively as a bistable switch, conducting when the gate receives a current trigger, and continuing to conduct while the voltage across the device is not reversed (forward-biased). It is one of the several controllable semi conductor devices that can act either like a switch, rectifier or as a voltage regulator.

  • (0)

    RGB LED 5mm (Clear)

    NPR 20.00

    Clear-lens ultra bright 5-mm RGB LEDs with four leads, common-anode configuration. The water-clear lens projects high brightness for visibility at a distance, but does not inherently provide color mixing like the diffused lens version does.

  • (0)

    RGB LED White 5mm

    NPR 20.00

     An LED light source made of red, green, and blue LEDs (RGB-LEDs) can provide the unique feature of color variability, allowing the user to select the desired color point of the lamp. The white light color accuracy required in the general illumination market is a challenge for LEDs. 

  • (0)

    Breakable Male Header Pin

    NPR 60.00

    A pin header (or simply header) is a form of electrical connector. It consists of one or more rows of male pins typically spaced 2.54 millimetres (0.1 in) apart, but sometimes 2 millimetres (0.079 in) or 1.27 millimetres (0.05 in) is used as well. The distance between pins is commonly referred as pitch in the electronic community.