Best Seller Items
Featured Items
-
-
Remote control
Operating voltage: DC12V (27A/12V battery x1)
Operating Current: 10mA @ 12V
Radiated power: 10mw @ 12V
Modulation mode: ASK (Amplitude Modulation)
Transmitting frequency: 315MHZ (SAW frequency stabilization)
Transmission distance :50-100M (Open field the receiver sensitivity -100dbm)
Encoder types: fixed code
The frequency of this product is 315 mhz.
315MHZ Wireless 4 Channel Key Remote Control Receiver Module
NPR 700.00 -
This is a 5V 4-channel relay or four channel relay module interface board, and each channel needs a 15-20mA driver current. It can be used to control various appliances and equipment with large current. It is equiped with high-current relays that work under AC250V 10A or DC30V 10A. It has a standard interface that can be controlled directly by microcontroller.
- Size: 75mm (Length) * 55mm (Width) * 19.3mm (Height)
- Weight: 61g
- PCB Color: Blue
- There are four fixed screw holes at each corner of the board, easy for install and fix. The diameter of the hole is 3.1mm
- High quality Songle relay is used with single pole double throw, a common terminal, a normally open terminal, and a normally closed terminal
- Optical coupling isolation, good anti-interference.
- Closed at low level with indicator on, released at high level with indicator off
- VCC is system power source, and JD_VCC is relay power source. Ship 5V relay by default. Plug jumper cap to use
- The maximum output of the relay: DC 30V/10A, AC 250V/10A
4 Channel Relay Module (5v)
NPR 500.00 -
4-Digit 7-Segment Display – Anode is a common anode 4-digit 7-segment display. It is generally used in indicator applications.
4 Digit LED 7-segment display
NPR 440.00 -
-
This relay module allows you to combine the processing power of the Arduino to devices that use higher current and voltage. It does so by providing four relays that are rated for 10A at 125VAC.
There are four relays that each provide dry contact outputs. That is to say that each relay provides a common (COM) , normally open (NO) and a normally closed (NC) terminal.
4- Channel Arduino Relay Shield
NPR 650.00 -
This ia a 40-pin IC base with pins spaced at 0.1(2.54mm) . It is usable for plugging in and out the IC during prototyping and to protect the IC from damage due to heat while soldering by first soldering the base to the board and plugging the IC later.
40-Pin IC base
NPR 45.00 -
The CD4017 is a CMOS Decade counter IC. CD4017 is used for low range counting applications. It can count from 0 to 10 (the decade count). The circuit designed by using this ic will save board space and also time required to design the circuit. CD4017 is as ‘Johnson 10 stage decade counter’.
4017 decade counter
NPR 50.00 -
This 500k Trimpot will give you a variable resistance. Just turn to change the resistance to the value you need.
500K Ohm Potentiometer
NPR 20.00 -
Features
-
Full color RGB variation
- Circular LED point source
5mm 8*8 LED Matrix Common Anode
NPR 160.00 -
-
One of the most useful things you can do with an Arduino is control higher voltage (120-240V) devices like fans, lights, heaters, and other household appliances. Since the Arduino operates at 5V it can’t control these higher voltage devices directly, but you can use a 5V relay to switch the 120-240V current and use the Arduino to control the relay.
5V Relay
NPR 100.00 -
