• Quick View
    (0)

    The TDA7052A/AT are mono BTL output amplifiers with DC volume control. They are designed for use in TV and monitors, but also suitable for battery-fed portable recorders and radios.

    TDA 7052A

    NPR 149.00
  • Quick View
    (0)

    This ia a 40-pin IC base with pins spaced at 0.1(2.54mm) . It is usable for plugging in and out the IC during prototyping and to protect the IC from damage due to heat while soldering by first soldering the base to the board and plugging the IC later.

    40-Pin IC base

    NPR 45.00
  • Quick View
    (0)

    The LM386 is a power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count low, but the addition of an external resistor and capacitor between pins 1 and 8 will increase the gain to any value from 20 to 200.

    LM386N HYC 3123H (Audio Amplifier) IC

    NPR 40.00
  • Quick View
    (0)

    16 Pin IC Socket base adaptor is a 16 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when required. The IC is placed on the socket at the time of use. This base acts as a removable IC holder.

    16 Pin IC Base

    NPR 25.00
  • Quick View
  • Quick View
  • Quick View
  • Quick View
    (0)

    The LM317 is an adjustable 3−terminal positive voltage regulator
    capable of supplying in excess of 1.5 A over an output voltage range of
    1.2 V to 37 V. This voltage regulator is exceptionally easy to use and
    requires only two external resistors to set the output voltage. Further, it
    employs internal current limiting, thermal shutdown and safe area
    compensation, making it essentially blow−out proof

    LM317T CCVO3 Voltage Regulator IC

    NPR 40.00
  • Quick View
    (0)

    The LM337 is adjustable 3-terminal negative-voltage regulator capable of supplying in excess of –1.5 A over an output voltage range of –1.2 V to –37 V. It requires only two external resistors to set the output voltage and one output capacitor for frequency compensation.

    LM337T P+ Voltage Regulator IC

    NPR 40.00
  • Quick View
    (0)

    The SMB130 is a 28 pin DIP module that includes all necessary components for a 13.56 MHz RFID Mifare, aside from a PCB antenna.

    RFID Sensor 13.6 MHz +1 RFID Chain+1RFID Card

    NPR 700.00
  • -19%
    Quick View
    (0)

    Take your sonar outside – great for all weather robots! The XL-MaxSonar-WRMA1 ignores smaller targets and only reports the range to target with the largest acoustic return. This is our most advanced weather resistant sensor designed for target detection and ranging outdoors or in tank or bin applications.

    Waterproof ultrasonic sensor

    NPR 890.00
  • Quick View
    (0)

    3-Axis Digital Accelerometer is the key part in projects like orientation detection, gesture detection and Motion detection. 

    Digital Accelerometer ADXL 345

    NPR 599.00
  • Quick View
    (0)

    TMP36 is a wide range, low power temperature sensor that outputs an analog voltage that is proportional to the ambient temperature.

    TMP36 Temperature Sensor

    NPR 250.00
  • Quick View
    (0)
    • Technical parameters
    • power 5V DC
    •  maximum working current < 10mA
    • operating frequency ID 125KHz 、IC 13.56MHZ
    •  supports
    • ID:EM4100 and its compatible cards

     

    • IC:Reader Out format
    • MF1 Classic S50,S70,FM1108,MF Plus 4bit, NTAG213,NTAG215,NTAG216,

     

    •  support management card configuration
    • card sensing speed is less than 200ms
    • operating temperature 60 C 0
    • 10% ~ 95% (no humidity dew)
    • Operating environment
    • WinXP, Win7, Win8, Android-OTG, etc., in theory, as long as the USB keyboard to support the computer or mobile phones can use this product.
    • Using method
    • the use of the configuration card configuration card, the card is 3 seconds. The configuration of red, blue flash alternately exhibit of lanterns.

    Portable USB RFID Sensor 125 KHz

    NPR 3,000.00
  • Quick View
    (0)

    This sensor uses an infrared emitted diode combined with an infrared phototransistor to detect the reflected infrared signal. Ideal for sensing black-to-white transitions or can be used to detect nearby objects (.5-1cm)

    QRD 1114 (Optical Detector / Photo-transistor)

    NPR 99.00
  • Quick View
    (0)

    Water Level Sensor is easy-to-use, cost effective high level/drop recognition sensor, which is obtained by having a series of parallel wires exposed traces measured droplets/water volume in order to determine the water level.

    Water Sensor

    NPR 449.00