Best Seller Items
Featured Items
-
Solder wires are wires with a low melting point which can melt along with the soldering iron. Depending on the application and soldering temperature, many different types of soldering wires are available. Solder wires are generally two different types – lead alloy solder wire and lead-free solder.
Soldering Wire
NPR 200.00 -
Power/Voltage: DC 12V
THis 12V Solenoid lock has a slug with a slanted cut and a good mounting bracket. It’s basically an electronic lock, designed for a basic cabinet, safe or door. When 9-12 VDC is applied, the slug pulls in so it doesn’t stick out and the door can be opened. It does not use any power in this state. It is very easy to install for automatic door lock systems like electric door lock with the mounting board. This solenoid in particular is nice and strong.
Solenoid 12V DC Electric Lock Assembly
NPR 1,790.00 -
A solenoid valve is an electromechanically operated valve. The valve is controlled by an electric current through a solenoid: in the case of a two-port valve the flow is switched on or off; in the case of a three-port valve, the outflow is switched between the two outlet ports. Solenoid valves are the most frequently used control elements in fluidics. Their tasks are to shut off, release, dose, distribute or mix fluids. They are found in many application areas. Solenoids offer fast and safe switching, high reliability, long service life, good medium compatibility of the materials used, low control power and compact design.
Solenoid Valve (0.5″ 12V)
NPR 1,350.00 -
Product Features
- Working voltage:DC 3.3-5V
- Dimension: Approx.4.5(L) x 1.7(H) x 0.9(W)cm
- Main chip: LM393, Electret condenser microphone
- Package Included: 1 x Sound Detection Sensor Module
Sound Detection Sensor Module
NPR 250.00 -
3w, 4 Ohm magnetic speaker is a viable replacement for damaged or under-performing speakers in your home music system. The speakers have an internal magnetic configuration, and it comes with a metal shell to avoid impact damages. This magnetic speaker’s simple design allows it to install and remove easily without much expertise in electronics. Furthermore, this design is suitable for mini speaker, music player, doorbell, computer, multimedia speakers, etc.
Note: The price mentioned is for a single piece of speaker, not a pair.
Speaker 4Ohm 3Watt
NPR 200.00 -
Model: SCT-013-000
Rated input current:0-100A.
Output: 0-50mA or 0-1V.
Split Core Current Sensor Transformer SCT013
NPR 1,560.00 -
Features:
- Mini DC to DC 12V-24V to 5V 3A
- Output 1.8V, 2.5V, 3.3V, 5V, 9V, 12V
Stepdown Power Supply Module (Buck Converter)
NPR 250.00 -
Stepper Motor is a motor controlled by a series of electromagnetic coils. The center shaft has a series of magnets mounted on it, and the coils surrounding the shaft are alternately given current or not, creating magnetic fields which repulse or attract the magnets on the shaft, causing the motor to rotate.
Stepper Motor 28BYJ-48 5v
NPR 420.00 -
-
A package includes 1 Clockwise Motor and 1 Anti-clockwise Motor
Product Dimensions
5 x 0.5 x 0.3 inchesSyma X5C / X5 Drone Brushless Motor
NPR 999.00 -
Features:
- Durable product
- Made from good material
- Good product to use
T-Cobbler Plus v2.2 Cable T-GPIO Expansion Board for Raspberry Pi
NPR 800.00 -
The TCA9548A is an I2C multiplexer that allows up to 8 devices with the same I2C address to be hooked up to an MCU or permits up to 8 separate I2C buses to be controlled.
TCA9548A I2C 8 Channel Multiplexer Module
NPR 300.00 -
TCRT5000 sensors constantly emit infrared infrared emitting diodes, infrared rays emitted when reflected or not reflected but the intensity is not big enough, the infrared receiver has been in the off state, then the output of the module is low, indicating diode remains off state.
TCRT5000 IR Infrared Line Track Follower Sensor Obstacle Avoidance Module
NPR 120.00 -
The TCRT5000 are reflective sensors which include an infrared emitter and phototransistor in a leaded package which blocks visible light. The package includes two mounting clips.TCRT5000 sensor works with the general infrared sensor, like a sense of a TCRT5000 has an infrared emission tube and an infrared receiver tube.
TCRT5000 Reflective Infrared Optical Sensor
NPR 75.00 -
The TCS3200 programmable color light-to-frequency converter combines configurable silicon photodiodes and a current-to-frequency converter on a single monolithic CMOS integrated circuit. The output is a square wave (50% duty cycle) with frequency directly proportional to light intensity (irradiance). The TCS3200 reads an 8×8 array of photodiodes.
TCS 3200 (Color Sensor)
NPR 680.00 -
Teensy 4.0 is the same size and shape as Teensy 3.2, and retains compatibility with most of the pin functions on Teensy 3.2. When running at 600 MHz, Teensy 4.0 consumes approximately 100mA current. Teensy 4.0 provides support for dynamic clock scaling.
Teensy 4.0 IMRT1062 Chip Development Board
NPR 6,400.00 -
The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data.
Temperature Humidity Sensor DHT- 11
NPR 410.00 -
This module integrates DHT11 sensor and other required components on a small PCB. The DHT11 sensor includes a resistive-type humidity measurement component, an NTC temperature measurement component and a high-performance 8-bit microcontroller inside, and provides calibrated digital signal output.
Note: The cable is not included in the pack
Temperature Humidity Sensor DHT- 11 Module
NPR 500.00 -
DHT22 capacitive humidity sensing digital temperature and humidity module is one that contains the compound has been calibrated digital signal output of the temperature and humidity sensors. Application of a dedicated digital modules collection technology and the temperature and humidity sensing technology, to ensure that the product has high reliability and excellent long-term stability.
Temperature Humidity Sensor DHT-22 Module
NPR 620.00 -
It is a MAX6675 thermocouple which is a cold junction compensation, linearity coorection, thermocouple break detection ADC Serial K-type thermocouple, its temperature resolution capability is 0.25 Degree, cold unctioncompensatrion range is -20 to +80’C, wide operqating range 3.0 to 5.5 V.
Thermocouple Temperature Sensor
NPR 550.00 -
Thyristor is a solid-state semiconductor device with four layers of alternating N and P-type material. It acts exclusively as a bistable switch, conducting when the gate receives a current trigger, and continuing to conduct while the voltage across the device is not reversed (forward-biased). It is one of the several controllable semi conductor devices that can act either like a switch, rectifier or as a voltage regulator.
Thyristor / Thermistor
NPR 30.00 -
-
TLC 5940 is a 16 channel LED driver IC. It really is a convenient part, allowing you to adjust the brightness of sixteen individual LEDs via PWM (pulse-width modulation) – and you can also daisy-chain more than one TLC5940 to control even more.
TLC 5940NT
NPR 199.00 -
TMP36 is a wide range, low power temperature sensor that outputs an analog voltage that is proportional to the ambient temperature.
TMP36 Temperature Sensor
NPR 250.00 -
Technical specification
Supply: 5 V
Power consumption: 0.4 to 1.0 mA
Min. Ee irradiation: 0.35 mW/m2 typ.
Angle of detection: 90
Temperature range: -25 C to +85 CTSOP1838 IR Receiver
NPR 40.00 -
TTGO T-Call v1.3 v1.4 ESP32 Wireless Module & SIM800L GPRS Module (with Antenna) is a custom ESP32 (ESP-WROVER-B 8MB PSRAM) based development board with an onboard 2G/GPRS Module SIM800L. The USB Type C pluggable board also has an onboard LiPo Battery Charging Circuit & Connector and is a good choice for building IoT applications.
TTGO T-Call V1.3 ESP32 SIM800L Wireless Module
NPR 11,500.00 -
The TTP223 is a touch pad detector IC which offers 1 touch key. The touching
detection IC is designed for replacing traditional direct button key with diverse pad size.
Capacitive touch allows electronics to sense when your finger is within a few millimetres
of a surface to simulate a button “press” just like how the pushbutton works. Capacitive
sensing may be used in any place where low to no force human touch sensing is
desirable.TTP223B Digital Touch Sensor
NPR 250.00