Best Seller Items
Featured Items
-
A biometric device is a security identification and authentication device. Such devices use automated methods of verifying or recognising the identity of a living person based on a physiological or behavioral characteristic. No More Fake lies and Faking.
POMELO Attendance Machine
NPR 18,000.00 -
Is it hard to track your employees? Complete Human Resource Management solution at an affordable price, Breadfruit offers POMELO-HRM payroll software.
Features:
– Card System
– Band System
– Face Recognition
– Finger Print RegistrationPOMELO HRM (Machine and Software)
NPR 30,000.00 -
- Technical parameters
- power 5V DC
- maximum working current < 10mA
- operating frequency ID 125KHz 、IC 13.56MHZ
- supports
- ID:EM4100 and its compatible cards
- IC:Reader Out format
- MF1 Classic S50,S70,FM1108,MF Plus 4bit, NTAG213,NTAG215,NTAG216,
- support management card configuration
- card sensing speed is less than 200ms
- operating temperature 60 C 0
- 10% ~ 95% (no humidity dew)
- Operating environment
- WinXP, Win7, Win8, Android-OTG, etc., in theory, as long as the USB keyboard to support the computer or mobile phones can use this product.
- Using method
- the use of the configuration card configuration card, the card is 3 seconds. The configuration of red, blue flash alternately exhibit of lanterns.
Portable USB RFID Sensor 125 KHz
NPR 3,000.00 -
-
-
-
Input: 100~240V, 50/60Hz
-
Output: 9V,1A
-
Works with most devices that use a 9V adaptor and less than 1A of power
-
Power Supply for Arduino
Power Supply for Arduino (9V 1A)
NPR 300.00 -
-
In this kit:
- Bc548 or Bc547 (Dose are similar Transistor)
- LDR
- Buzzer
- Resistor
- White LED
- 9v Battery + Cap
- Ribbon wire 5cm
- Circuit Diagram
Project Security Box Kit || For Student Science Projects
NPR 245.00 -
-
-
This prototyping shield is the best out there (well, we think so, at least), and now is even better with Version R3 – updated for the most compatibility with just about all the Arduinos! It works with UNO, Mega, Leonardo, NG, Diecimila, Duemilanove, and compatible Arduinos. Yun’s and Arduino Ethernets have a chunky Ethernet jack that gets in the way of stacking, you can use the stacking headers included and it will work, just doesn’t sit nice and flat.
Proto Shield for Arduino kit (Adafruit)
NPR 1,500.00 -
The Proximity Switch is an Inductive Proximity Sensor Detection Switch with PNP normally open transistor switch, also known as Inductive sensor or metal sensor. It operates within a power supply voltage range of DC 6V to 36V. This Switch Module contains high frequency oscillations, a detection circuit, an amplifier circuit, a circuit solution, and an output circuit. It can be widely used in various applications like: – Automatic control industry for detection, controlling and non-contact switching, Paper making, Light industry for limiting station, Orientation taking count and many more.
Proximity Sensor
NPR 580.00 -
This sensor uses an infrared emitted diode combined with an infrared phototransistor to detect the reflected infrared signal. Ideal for sensing black-to-white transitions or can be used to detect nearby objects (.5-1cm)
QRD 1114 (Optical Detector / Photo-transistor)
NPR 99.00 -
The rain sensor module is an easy tool for rain detection. It can be used as a
switch when raindrop falls through the raining board and also for measuring rainfall
intensity. The module features, a rain board and the control board that is separate for
more convenience, power indicator LED and an adjustable sensitivity though a
potentiometer. The analog output is used in detection of drops in the amount of rainfall.
Connected to 5V power supply, the LED will turn on when induction board has no rain
drop, and DO output is high. When dropping a little amount water, DO output is low, the
switch indicator will turn on. Brush off the water droplets, and when restored to the initial
state, outputs high level.Raindrops Sensor Module MH-RD
NPR 350.00 -
The Raspberry Pi 3 Model B is the third generation Raspberry Pi. It replaced the Raspberry Pi 2 Model B in February 2016. Compared to the Raspberry Pi 2 it has:
-
A 1.2GHz 64-bit quad-core ARMv8 CPU
-
802.11n Wireless LAN
-
Bluetooth 4.1
- Bluetooth Low Energy (BLE)
Raspberry Pi 3 Model B
NPR 5,600.00 -
-
3.5 inches touch screen module is designed especially for Raspberry Pi. It transmits data though GPIO, SPI (Serial Peripheral Interface) on the P1 interface. The CPLD on the display module controls display content according to the data transmitted from the SPI interface.
Raspberry Pi 3.5” TFT with touch screen
NPR 3,000.00 -
-10%
Raspberry pi 4 kit includes:
– Raspberry pi 4 (4GB)
– compatible power adapter
– 16GB SD Card
– Genuine Pi case
-ethernet cable
-Micro HDMI to HDMI cable
-heat sink
-Sd card adapterRaspberry Pi 4 (4GB) kit
NPR 18,000.00 -
Raspberry pi 4 kit includes:
– Raspberry pi 4 (8GB)
– compatible power adapter
– 32GB SD Card
– Genuine Pi case
-Ethernet cable
-Micro HDMI to HDMI cable
-heat sink
– SD card AdapterRaspberry Pi 4 (8GB) kit
NPR 24,000.00 -
-12%
The speed and performance of the new Raspberry Pi 4 are a step up from earlier models. For the first time, this model of Raspberry Pi is a complete desktop experience. Whether you’re editing documents, browsing the web with a bunch of tabs open, juggling spreadsheets, or drafting a presentation, you’ll find the experience smooth and very recognizable — but on a smaller, more energy-efficient, and much more cost-effective machine.New Features Include:- The fanless, energy-efficient Raspberry Pi runs silently and uses far less power than other computers.
- Raspberry Pi 4 comes with Gigabit Ethernet, along with onboard wireless networking and Bluetooth.
- Your new Raspberry Pi 4 has upgraded USB capacity: along with two USB 2 ports you’ll find two USB 3 ports, which can transfer data up to ten times faster.
- Comes with 2GBs of RAM
- Supports two monitors at once- and in 4K, too!
Raspberry Pi 4 Model B Plus kit (2GB RAM)
NPR 15,000.00 -
A USB-C based power adapter for Raspbeery Pi 4 Model B.Specification:- 5.1V / 3.0A DC output
- 96-264Vac operating input range
- Short circuit, overcurrent and over temperature protection
- 1.5m 18 AWG captive cable with USB-C output connector
Raspberry Pi 4 Power Adapter
NPR 1,000.00 -
The everything computer. Optimised.
With 2–3× the speed of the previous generation, and featuring silicon designed in‑house for the best possible performance, we’ve redefined the Raspberry Pi experience.
Raspberry pi 5 4GB
NPR 28,500.00 -
This 5mp camera module is capable of 1080p video and still images and connects directly to your Raspberry Pi. Connect the included ribbon cable to the CSI (Camera Serial Interface) port on your Raspberry Pi, boot up the latest version of Raspbian
The board itself is tiny, at around 25mm x 20mm x 9mm and weighing in at just over 3g, making it perfect for mobile or other applications where size and weight are important. The sensor has a native resolution of 5 megapixels, and has a fixed focus lens onboard. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video.
Note: This module is only capable of taking pictures and video, not sound.
Raspberry Pi Cam 5 MP (Camera)
NPR 1,500.00 -
This is a T-type breakout kit used for extending the GPIO interface on Raspberry Pi to the breadboard. It helps you to make the connections between Raspberry Pi and breadboard become simple.
The kit comes with a 26 pin ribbon cable and an adapter board. Compatible with both Raspberry Pi revision A and revision B.
Raspberry Pi GPIO Extension Board v3.0 + cable
NPR 800.00 -
Raspberry Pi Pico is a tiny, fast, and versatile board built using RP2040, a brand new microcontroller chip designed by Raspberry Pi in the UK.
Raspberry Pi Pico
NPR 1,250.00 -
The Raspberry Pi Zero Case is a perfect fit for Raspberry Pi Zero, Raspberry Pi Zero W, and Raspberry Pi Zero 2 W.
Raspberry pi Zero Case
NPR 800.00 -
Specifications:
Material: Carbon, Nylon
Length: 10 inch
Diameter of Shaft: 6.0mm
Thickness of center: 9.7mmNote: Price mentioned is for a pair of blades
RC Drone 1045 CW CCW Propeller Blades
NPR 480.00 -
Reed switches are magnetically-actuated electrical switches (not magically-actuated, though it seems that way sometimes). When the body of the switch is exposed to a magnetic field – like a magnet or even a strong electrical current – two ferrous materials inside pull together, the connection closes, and current can flow. In absence of a magnetic field, the switch opens as does the circuit it’s a part of.
Reed Switch
NPR 30.00 -
-
RF modules are very popular among the Arduino tinkerers. The 433MHz is used on a wide variety of applications that require wireless control.
Specifications RF 433MHz Receiver
-
Frequency Range: 433.92 MHz
-
Modulation: ASK
-
Input Voltage: 5V
Note: Each unit contains a pair of transmitter and receiver.
RF 433MHz Transmitter & Receiver Module
NPR 280.00 -
