-
The emitter is an IR LED and the detector is an IR photodiode. The IR phototdiode is sensitive to the IR light emitted by an IR LED. The photo-diode’s resistance and output voltage change in proportion to the IR light received. This is the underlying working principle of the IR sensor.
IR Sensor(Photodiode)
NPR 19.00 -
Photo resistors, also known as light dependent resistors (LDR), are light sensitive devices most often used to indicate the presence or absence of light, or to measure the light intensity.
LDR Sensor
NPR 25.00 -
The TCRT5000 are reflective sensors which include an infrared emitter and phototransistor in a leaded package which blocks visible light. The package includes two mounting clips.TCRT5000 sensor works with the general infrared sensor, like a sense of a TCRT5000 has an infrared emission tube and an infrared receiver tube.
TCRT5000 Reflective Infrared Optical Sensor
NPR 75.00 -
-
The TTP223 is a touch pad detector IC which offers 1 touch key. The touching
detection IC is designed for replacing traditional direct button key with diverse pad size.
Capacitive touch allows electronics to sense when your finger is within a few millimetres
of a surface to simulate a button “press” just like how the pushbutton works. Capacitive
sensing may be used in any place where low to no force human touch sensing is
desirable.TTP223B Digital Touch Sensor
NPR 250.00 -
Product Features
- Working voltage:DC 3.3-5V
- Dimension: Approx.4.5(L) x 1.7(H) x 0.9(W)cm
- Main chip: LM393, Electret condenser microphone
- Package Included: 1 x Sound Detection Sensor Module
Sound Detection Sensor Module
NPR 250.00 -
TMP36 is a wide range, low power temperature sensor that outputs an analog voltage that is proportional to the ambient temperature.
TMP36 Temperature Sensor
NPR 250.00 -
- Simple to Use, Auto Calibration
- Output Status Indicator LED
- Easy to replace mechanical key outputs
TTP224 4-Channel Digital Touch Sensor Module Capacitive Touch Switch
NPR 300.00 -
The vibration sensor module based on the vibration sensor SW-420 and Comparator LM393 is used to detect vibrations. The threshold can adjust using an on-board potentiometer. During no vibration, the sensor provides Logic Low and when the vibration is detected, the sensor provides Logic High.
Vibration Sensor Module
NPR 350.00 -
Barometric Pressure sensor measures the absolute pressure of the air around it. This pressure varies with both the air and altitude. Depending upon the interpretation of the data, changes in the weather can be monitored, altitude can be measured, and any task can be done that requires the accurate pressure measurement.
BMP 180 (Pressure Sensor)
NPR 350.00 -
The rain sensor module is an easy tool for rain detection. It can be used as a
switch when raindrop falls through the raining board and also for measuring rainfall
intensity. The module features, a rain board and the control board that is separate for
more convenience, power indicator LED and an adjustable sensitivity though a
potentiometer. The analog output is used in detection of drops in the amount of rainfall.
Connected to 5V power supply, the LED will turn on when induction board has no rain
drop, and DO output is high. When dropping a little amount water, DO output is low, the
switch indicator will turn on. Brush off the water droplets, and when restored to the initial
state, outputs high level.Raindrops Sensor Module MH-RD
NPR 350.00 -
This capacitive touch sensor module uses the TTP229 integrated circuit, making it easy to add capacitive touch input for projects. It features 16 sensitive touch pads that make an ideal replacement for the traditional keypads.
16 Channel Digital Capacitive Switch Touch Sensor Module
NPR 350.00 -
Specifications:
Material: ABS
Dimension: approx. 27 x 14 x 8(mm)
Switch pattern: N/O normally open, alarm-on-broken
Voltage: 100V DC Rated power: 10W
Actuation distance: 15-25mm Wire lead: 24 Awg, about 350mm long
Mounting method: SMD (by screws or double-sided tapes)
Recommendations in application: wooden door, window
Features:
Easy installation
Reliable performance
Good characteristic of abrasion-proof
Best Choice for you to protect family
There are two types of reed switches: “normally open” reed switches and “normally closed” reed switches. The metal reeds on a normally open switch stay open when there is no magnet near the switch. In the presence of a magnetic field, the contacts of a normally-open reed switch will close. A normally-closed reed switch is closed when it is not near a magnet; as a magnet is brought close to it, a normally-closed switch will open
Wired Door Window Sensor Magnetic Switch
NPR 400.00 -
HX711 is an electronic scale module, whose working principle is to convert the measured changes in resistance value changes, through the conversion circuit into electrical output. The module communicates with the host computer through TTL 232.
HX711 Dual-Channel Weighing Sensor Module
NPR 400.00 -
Water Level Sensor is easy-to-use, cost effective high level/drop recognition sensor, which is obtained by having a series of parallel wires exposed traces measured droplets/water volume in order to determine the water level.
Water Sensor
NPR 449.00