arduino

Default sorting
Show
16
  • Quick View
    (0)
    Arduino

    Proto Shield for Arduino kit (Adafruit)

    NPR 1,500.00

    This prototyping shield is the best out there (well, we think so, at least), and now is even better with Version R3 – updated for the most compatibility with just about all the Arduinos! It works with UNO, Mega, Leonardo, NG, Diecimila, Duemilanove, and compatible Arduinos. Yun’s and Arduino Ethernets have a chunky Ethernet jack that gets in the way of stacking, you can use the stacking headers included and it will work, just doesn’t sit nice and flat.

  • Quick View
    (0)
    Arduino

    Arduino Pro Mini

    NPR 899.00
    Microcontroller:ATmega328
    Operating Voltage:3.3V or 5V (depending on model)
    Input Voltage:3.35 -12 V (3.3V model)or 5 – 12 V (5V model)
    Digital I/O Pins:14 (of which 6 provide PWM output)
    Analog Input Pins:6
    DC Current per I/O Pin:40 mA
    Flash Memory32 kB (of which 0.5 kB used by bootloader)
    SRAM:2 kB
    EEPROM:1 kB
    Clock Speed:8 MHz (3.3V model) or 16 MHz (5V model)
  • Quick View
    (0)
    Arduino

    Arduino Uno/Mega USB Cable

    NPR 200.00

    Use it to connect Arduino Uno, Arduino Mega 2560, Arduino 101 or any board with the USB female A port of your computer.
    USB cable type A/B Standard USB 2.0 cable.

  • Quick View
    (0)
    Arduino

    Arduino ethernet Shield

    NPR 4,400.00

    The Arduino Ethernet Shield connects your Arduino to the internet in mere minutes. Just plug this module onto your Arduino board, connect it to your network with an RJ45 cable (not included) and follow a few simple instructions to start controlling your world through the internet. As always with Arduino, every element of the platform – hardware, software and documentation – is freely available and open-source. This means you can learn exactly how it’s made and use its design as the starting point for your own circuits. Hundreds of thousands of Arduino boards are already fueling people’s creativity all over the world, everyday. Join us now, Arduino is you!

    Requires an Arduino board (not included)
    Operating voltage 5V (supplied from the Arduino Board)
    Ethernet Controller: W5100 with internal 16K buffer
    Connection speed: 10/100Mb
    Connection with Arduino on SPI port

  • Quick View
    (0)
    Arduino

    Arduino Nano USB Cable – MicroUSB Cable

    NPR 250.00
  • Quick View
    (0)
    Arduino

    Arduino Lilypad

    NPR 600.00

    Microcontroller

    ATmega168 or ATmega328V

    Operating Voltage

    2.7-5.5 V

    Input Voltage

    2.7-5.5 V

    Digital I/O Pins

    14

    PWM Channels

    6

    Analog Input Channels

    6

    DC Current per I/O Pin

    40 mA

    Flash Memory

    16 KB (of which 2 KB used by bootloader)

    SRAM

    1 KB

    EEPROM

    512 bytes

    Clock Speed

    8 MHz

  • Quick View
    (0)
    Arduino

    Arduino Leonardo

    NPR 1,950.00
    Microcontroller
    ATmega32u4
    Operating Voltage
    5V
    Input Voltage (recommended)
    7-12V
    Input Voltage (limits)
    6-20V
    Digital I/O Pins
    20
    PWM Channels
    7
    Analog Input Channels
    12
    DC Current per I/O Pin
    40 mA
    DC Current for 3.3V Pin
    50 mA
    Flash Memory
    32 KB (ATmega32u4) of which 4 KB used by bootloader
    SRAM
    2.5 KB (ATmega32u4)
    EEPROM
    1 KB (ATmega32u4)
    Clock Speed
    16 MHz
    Length
    68.6 mm
    Width
    53.3 mm
    Weight
    20g
  • Quick View
    (0)
    Arduino

    Arduino Due

    NPR 3,899.00

    The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller.

    It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.

    Warning: Unlike most Arduino boards, the Arduino Due board runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board.

  • Quick View
    (0)
    Arduino

    Arduino Uno Casing (Transparent Box)

    NPR 300.00

    Protect your Arduino UNO R3 with the transparent and stylish casing.

  • Quick View
    (0)
    Arduino

    Power Supply for Arduino (9V 1A)

    NPR 300.00

    • Input: 100~240V, 50/60Hz

    • Output: 9V,1A

    • Works with most devices that use a 9V adaptor and less than 1A of power

    • Power Supply for Arduino

  • -20%
    Quick View
    (0)
    Arduino

    Arduino Mega ADK

    NPR 4,755.00

    The Arduino MEGA ADK is a microcontroller board based on the ATmega2560 (datasheet). It has a USB host interface to connect with Android based phones, based on the MAX3421e IC.

  • Quick View
    (0)
    Arduino

    Arduino L293D Motor Driver Shield

    NPR 700.00

    The Arduino Motor Shield allows you to easily control motor direction and speed using an Arduino. By allowing you to simply address Arduino pins, it makes it very simple to incorporate a motor into your project. It also allows you to be able to power a motor with a separate power supply of up to 12v.

  • Quick View
    (0)
    Arduino

    Arduino Data Logger Shield (Micro SD Slot + RTC)

    NPR 1,699.00

    • Prototyping area for soldering connectors, circuitry or sensors.

    • Onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run

    • Works with Arduino UNO, Duemilanove, Diecimila, Leonardo or ADK/Mega R3 or higher. ADK/Mega R2 or lower are not supported.

    • SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card

    • Real time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years

  • Quick View
    (0)
    Arduino

    Arduino Breadboard Shield

    NPR 450.00

    Works with the Uno! This prototyping shield is the best out there (well, we think so, at least). It works with UNO, NG, Diecimila and Duemilanove Arduinos.

  • Quick View
    (0)
    Arduino

    4- Channel Arduino Relay Shield

    NPR 650.00

    This relay module allows you to combine the processing power of the Arduino to devices that use higher current and voltage.   It does so by providing four relays that are rated for 10A at 125VAC.

    There are four relays that each provide dry contact outputs.  That is to say that each relay provides a common (COM) , normally open (NO) and a normally closed (NC) terminal.

  • Quick View
    (0)
    Arduino

    Arduino Mega 2560 (Chinese)

    NPR 1,550.00

    It is the Chinese clone of the Arduino Mega 2560 and is capable of doing all the functions.

    The MEGA 2560 is designed for more complex projects. With 54 digital I/O pins, 16 analog inputs and a larger space for your sketch it is the recommended board for 3D printers and robotics projects. This gives your projects plenty of room and opportunities.The MEGA 2560 is designed for more complex projects. With 54 digital I/O pins, 16 analog inputs and a larger space for your sketch it is the recommended board for 3D printers and robotics projects. This gives your projects plenty of room and opportunities.