-
LM386N HYC 3123H (Audio Amplifier) IC
NPR 40.00The LM386 is a power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count low, but the addition of an external resistor and capacitor between pins 1 and 8 will increase the gain to any value from 20 to 200.
-
L 7805CV Voltage Regulator IC
NPR 40.00The 7805 Voltage Regulator IC is a commonly used voltage regulator that finds its application in most of the electronics projects. It provides a constant +5V output voltage for a variable input voltage supply
-
40-Pin IC base
NPR 45.00This ia a 40-pin IC base with pins spaced at 0.1(2.54mm) . It is usable for plugging in and out the IC during prototyping and to protect the IC from damage due to heat while soldering by first soldering the base to the board and plugging the IC later.
-
-
-
Shift register 74HC595D SOP
NPR 50.0074HC595D 8-bit serial-in, serial or parallel-out shift register with output latches; 3-state, NXP, SO16
-
4017 decade counter
NPR 50.00The CD4017 is a CMOS Decade counter IC. CD4017 is used for low range counting applications. It can count from 0 to 10 (the decade count). The circuit designed by using this ic will save board space and also time required to design the circuit. CD4017 is as ‘Johnson 10 stage decade counter’.
-
EL 4N35 712 Octocoupler
NPR 50.00The 4N35 is an optocoupler for general purpose applications.It contains a light emitting diode optically coupled to a photo-transistor
-
64 Pin DIP IC Socket Base Adaptor
NPR 50.0064 Pin DIP IC Socket Base Adaptor.
QUICK OVERVIEW 64 pins. JDEC compliant. Molded notch for proper orientation. Easy to insert and remove ICs. Features: 64 pins. JDEC compliant. Molded notch for proper orientation. Easy to insert and remove ICs. Package Included: 1 x 64 Pin DIP IC Socket Base Adaptor(5 pcs). -
20 pin Male IDC
NPR 50.00An insulation-displacement contact (IDC), also known as insulation-piercing contact (IPC), is an electrical connector designed to be connected to the conductor(s) of an insulated cable by a connection process which forces a selectively sharpened blade or blades through the insulation, bypassing the need to strip the conductors of insulation before connecting. When properly made, the connector blade cold-welds to the conductor, making a theoretically reliable gas-tight connection.”
-
Max232 EPE
NPR 70.00The MAX232 device is a dual driver/receiver that includes a capacitive voltage generator to supply TIA/EIA-232-F voltage levels from a single 5-V supply. Each receiver converts TIA/EIA-232-F inputs to 5-V TTL/CMOS levels. These receivers have a typical threshold of 1.3 V, a typical hysteresis of 0.5 V, and can accept ±30-V inputs. Each driver converts TTL/CMOS input levels into TIA/EIA-232-F levels.
-
DIP-18 LM3914N
NPR 75.00The LM3914 is a monolithic integrated circuit that senses analog voltage levels and drives 10 LEDs, providing a linear analog display. A single pin changes the display from a moving dot to a bar
graph. Current drive to the LEDs is regulated and programmable, eliminating the need for resistors. This feature is one that allows operation of the whole system from less than 3V. -
ULN 2003A
NPR 89.00The ULN2003A is an array of seven NPN Darlington transistors capable of 500 mA, 50 V output. It features common-cathode flyback diodes for switching inductive loads. It can come in PDIP, SOIC, SOP or TSSOP packaging.[1][2] In the same family are ULN2002A, ULN2004A, as well as ULQ2003A and ULQ2004A, designed for different logic input levels.
-
-
UA741 General Purpose Op-Amp
NPR 100.00The UA741 is a high performance monolithic operational amplifier constructed on a single silicon chip.
-
BreadFruit Electronics | | Buy latest Arduino, Sensors, Raspberry Pi, ICs, Resistors and other electronic components in Nepal
