• (0)

    16-channel PWM/Servo Shield

    NPR 1,120.00

    Item specifics
    Supply Voltage:
    Driver Shield V2
    Condition:
    New
    is_customized:
    Yes
    Model Number:
    Driver Shield V2
    Type:
    Driver Shield V2
    Application:
    Driver Shield V2
    Dissipation Power:
    Driver Shield V2
    Package:
    DIP
    Operating Temperature:
    Driver Shield V2

  • (0)

    4- Channel Arduino Relay Shield

    NPR 650.00

    This relay module allows you to combine the processing power of the Arduino to devices that use higher current and voltage.   It does so by providing four relays that are rated for 10A at 125VAC.

    There are four relays that each provide dry contact outputs.  That is to say that each relay provides a common (COM) , normally open (NO) and a normally closed (NC) terminal.

  • (0)

    Arduino Breadboard Shield

    NPR 450.00

    Works with the Uno! This prototyping shield is the best out there (well, we think so, at least). It works with UNO, NG, Diecimila and Duemilanove Arduinos.

  • (0)

    Arduino Data Logger Shield (Micro SD Slot + RTC)

    NPR 1,699.00
    • Prototyping area for soldering connectors, circuitry or sensors.

    • Onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run

    • Works with Arduino UNO, Duemilanove, Diecimila, Leonardo or ADK/Mega R3 or higher. ADK/Mega R2 or lower are not supported.

    • SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card

    • Real time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years

  • (0)

    Arduino Due

    NPR 3,899.00

    The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller.

    It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.

    Warning: Unlike most Arduino boards, the Arduino Due board runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board.

  • (0)

    Arduino ethernet Shield

    NPR 4,400.00

    The Arduino Ethernet Shield connects your Arduino to the internet in mere minutes. Just plug this module onto your Arduino board, connect it to your network with an RJ45 cable (not included) and follow a few simple instructions to start controlling your world through the internet. As always with Arduino, every element of the platform – hardware, software and documentation – is freely available and open-source. This means you can learn exactly how it’s made and use its design as the starting point for your own circuits. Hundreds of thousands of Arduino boards are already fueling people’s creativity all over the world, everyday. Join us now, Arduino is you!

    Requires an Arduino board (not included)
    Operating voltage 5V (supplied from the Arduino Board)
    Ethernet Controller: W5100 with internal 16K buffer
    Connection speed: 10/100Mb
    Connection with Arduino on SPI port

  • (0)

    Arduino L293D Motor Driver Shield

    NPR 700.00

    The Arduino Motor Shield allows you to easily control motor direction and speed using an Arduino. By allowing you to simply address Arduino pins, it makes it very simple to incorporate a motor into your project. It also allows you to be able to power a motor with a separate power supply of up to 12v.

  • (0)

    Arduino Leonardo

    NPR 1,950.00
    Microcontroller
    ATmega32u4
    Operating Voltage
    5V
    Input Voltage (recommended)
    7-12V
    Input Voltage (limits)
    6-20V
    Digital I/O Pins
    20
    PWM Channels
    7
    Analog Input Channels
    12
    DC Current per I/O Pin
    40 mA
    DC Current for 3.3V Pin
    50 mA
    Flash Memory
    32 KB (ATmega32u4) of which 4 KB used by bootloader
    SRAM
    2.5 KB (ATmega32u4)
    EEPROM
    1 KB (ATmega32u4)
    Clock Speed
    16 MHz
    Length
    68.6 mm
    Width
    53.3 mm
    Weight
    20g
  • (0)

    Arduino Lilypad

    NPR 600.00

    Microcontroller

    ATmega168 or ATmega328V

    Operating Voltage

    2.7-5.5 V

    Input Voltage

    2.7-5.5 V

    Digital I/O Pins

    14

    PWM Channels

    6

    Analog Input Channels

    6

    DC Current per I/O Pin

    40 mA

    Flash Memory

    16 KB (of which 2 KB used by bootloader)

    SRAM

    1 KB

    EEPROM

    512 bytes

    Clock Speed

    8 MHz

  • (0)

    Arduino Mega 2560 (Chinese)

    NPR 1,550.00

    It is the Chinese clone of the Arduino Mega 2560 and is capable of doing all the functions.

    The MEGA 2560 is designed for more complex projects. With 54 digital I/O pins, 16 analog inputs and a larger space for your sketch it is the recommended board for 3D printers and robotics projects. This gives your projects plenty of room and opportunities.The MEGA 2560 is designed for more complex projects. With 54 digital I/O pins, 16 analog inputs and a larger space for your sketch it is the recommended board for 3D printers and robotics projects. This gives your projects plenty of room and opportunities.

  • (0)

    Arduino Mega ADK

    NPR 4,755.00

    The Arduino MEGA ADK is a microcontroller board based on the ATmega2560 (datasheet). It has a USB host interface to connect with Android based phones, based on the MAX3421e IC.

  • (0)

    Arduino Mega Starter Kit

    NPR 9,500.00

    The Arduino MEGA 2560 is designed for projects that require more I/O lines, more sketch memory and more RAM. With 54 digital I/O pins, 16 analog inputs and a larger space for your sketch it is the recommended board for 3D printers and robotics projects.

  • (0)

    Arduino Micro Pro R3

    NPR 1,900.00

    The Arduino Micro is essentially a shrunk-down (1.9″ × 0.7″) version of the Arduino Leonardo: it is a microcontroller board based on the ATmega32U4 running at 16 MHz with 24 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs). This board ships with the male header pins soldered in.

  • (0)

    Arduino MKR WAN 1300 (LoRa® connectivity)

    NPR 17,125.00

    MKR WAN 1300 is a powerful board that combines the functionality of the MKR Zero and LoRa / LoRaWANTM connectivity. It is the ideal solution for makers wanting to design IoT projects with minimal previous experience in networking having a low power device.

  • (0)

    Arduino MKR WiFi 1010

    NPR 13,310.00

    The Arduino MKR WiFi 1010 is the easiest point of entry to basic IoT and pico-network application design. Whether you are looking at building a sensor network connected to your office or home router, orif you want to create a Bluetooth® Low Energy device sending data to a cellphone, the MKR WiFi 1010 is your one-stop-solution for many of the basic IoT application scenarios.

  • (0)

    Arduino MKR1000

    NPR 14,035.00

    Arduino MKR1000 is a powerful board that combines the functionality of the Zero and the Wi-Fi Shield. It is the ideal solution for makers wanting to design IoT projects with minimal previous experience in networking.