Best Seller Items
Featured Items
-
-
L293D H-Bridge Motor Driver
NPR 120.00L293D is a dual H-bridge motor driver integrated circuit (IC). Motor drivers act as current amplifiers since they take a low-current control signal and provide a higher-current signal. This higher current signal is used to drive the motors.
-
Maxim MAX7219 CNG
NPR 130.00The MAX7219are compact, serial input/output common-cathode display drivers that interface microprocessors (µPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs. Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8×8 static RAM that stores each digit.
-
TLC 5940NT
NPR 199.00TLC 5940 is a 16 channel LED driver IC. It really is a convenient part, allowing you to adjust the brightness of sixteen individual LEDs via PWM (pulse-width modulation) – and you can also daisy-chain more than one TLC5940 to control even more.
-
NE555 Timer Ic
NPR 30.00The 555 timer IC is an integrated circuit (chip) used in a variety of timer, pulse generation, and oscillator applications. The 555 can be used to provide time delays, as an oscillator, and as a flip-flop element. Derivatives provide up to four timing circuits in one package.
-
-
-
-
40-Pin IC base
NPR 45.00This ia a 40-pin IC base with pins spaced at 0.1(2.54mm) . It is usable for plugging in and out the IC during prototyping and to protect the IC from damage due to heat while soldering by first soldering the base to the board and plugging the IC later.
-
LM386N HYC 3123H (Audio Amplifier) IC
NPR 40.00The LM386 is a power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count low, but the addition of an external resistor and capacitor between pins 1 and 8 will increase the gain to any value from 20 to 200.
-
16 Pin IC Base
NPR 25.0016 Pin IC Socket base adaptor is a 16 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when required. The IC is placed on the socket at the time of use. This base acts as a removable IC holder.
-
-
-
-
LM317T CCVO3 Voltage Regulator IC
NPR 40.00The LM317 is an adjustable 3−terminal positive voltage regulator
capable of supplying in excess of 1.5 A over an output voltage range of
1.2 V to 37 V. This voltage regulator is exceptionally easy to use and
requires only two external resistors to set the output voltage. Further, it
employs internal current limiting, thermal shutdown and safe area
compensation, making it essentially blow−out proof -
LM337T P+ Voltage Regulator IC
NPR 40.00The LM337 is adjustable 3-terminal negative-voltage regulator capable of supplying in excess of –1.5 A over an output voltage range of –1.2 V to –37 V. It requires only two external resistors to set the output voltage and one output capacitor for frequency compensation.
