• Quick View
    (0)

    Specification:

    The main chip: ISD1820

    Size: 38mm * 42.5mm

    Working voltage: DC 3 ~ 5V

    Loudspeaker: 8Ω, 0.5W.

    Features:

    1.An easy to use 10 seconds of voice recording

    2.High-quality, natural voice restored

    3.Can be used as propaganda module

    4.With looping, jog playback, single-pass play function

    5.Available single-chip control

    6.This module can directly drive a small speaker 8 ohm 0.5WPower supply :3-5V, which can be accessed pin power; Audio recording control mode: the key to control or microcontroller, IO has drawn the line of control; Buttons control audio recording method of operation: REC button: record button, you can press and hold the recording, release the button to stop recording; RLAYE key: trigger mode playback, press will play this whole speech; PLAYL key: jog mode playback, press and hold until playback, release to stop playback; RPL Jumper: loop mode control, loop playback; FT Jumper: direct control, microphone voice through the speaker can playback;

    Arduino Voice Record Sound Module ISD1820 with Loudspeaker

    NPR 700.00
  • Quick View
    (0)

    The ATmega328 is a single-chip microcontroller created by Atmel in the megaAVR family (later Microchip Technology acquired Atmel in 2016). It has a modified Harvard architecture 8-bit RISC processor core.

    AT mega 328

    NPR 350.00
  • Quick View
    (0)

    ATMEL 20U TINY 85 2106HQU

    ATTINY85

    NPR 800.00
  • Quick View
  • Quick View
  • Quick View
    (0)
    • volume controller
    • volume for amplifier
    • Main used to control electrical devices
    • Easy operate in daily use time

    B47K Potentiometer

    NPR 70.00
  • -11%
    Quick View
    (0)

    The Banana Pi M2 Zero is an ultra compact single board computer which measures only 65mm*30mm. Its external interfaces are the same as the Raspberry Pi Zero W, and it will fit almost all cases and accessories for the Zero W. It uses the quad-core Cortex A7 Allwinner H3/H2+processor, with 512MB RAM. It’s ideal for light-weight systems and space-limited applications. Like other members of the Banana Pi family, it supports both Linux and Android operating systems.

    Banana Pi BPI-M2 ZERO

    NPR 8,000.00
  • Quick View
    (0)

    A barcode reader, also called a price scanner or point-of-sale ( POS ) scanner, is a hand-held or stationary input device used to capture and read information contained in a bar code . A barcode reader consists of a scanner , a decoder (either built-in or external), and a cable used to connect the reader with a computer.

    Barcode Reader

    NPR 3,800.00
  • Quick View
    (0)

    battery is a source of electric power consisting of one or more electrochemical cells with external connections for powering electrical devices. When a battery is supplying power, its positive terminal is the cathode and its negative terminal is the anode.The terminal marked negative is the source of electrons that will flow through an external electric circuit to the positive terminal. When a battery is connected to an external electric load, a redox reaction converts high-energy reactants to lower-energy products, and the free-energy difference is delivered to the external circuit as electrical energy. Historically the term “battery” specifically referred to a device composed of multiple cells; however, the usage has evolved to include devices composed of a single cell.

    Primary (single-use or “disposable”) batteries are used once and discarded, as the electrode materials are irreversibly changed during discharge; a common example is the alkaline battery used for flashlights and a multitude of portable electronic devices. Secondary (rechargeable) batteries can be discharged and recharged multiple times using an applied electric current; the original composition of the electrodes can be restored by reverse current. Examples include the lead–acid batteries used in vehicles and lithium-ion batteries used for portable electronics such as laptops and mobile phones.

    Batteries come in many shapes and sizes, from miniature cells used to power hearing aids and wristwatches to, at the largest extreme, huge battery banks the size of rooms that provide standby or emergency power for telephone exchanges and computer data centers. Batteries have much lower specific energy (energy per unit mass) than common fuels such as gasoline. In automobiles, this is somewhat offset by the higher efficiency of electric motors in converting electrical energy to mechanical work, compared to combustion engines.

    Rechargeable batteries (also known as secondary cells) are batteries that potentially consist of reversible cell reactions that allow them to recharge, or regain their cell potential, through the work done by passing currents of electricity.

    Battery 12v 2.8Ah

    NPR 1,600.00
  • Quick View
    (0)

    BC547 is an NPN bi-polar junction transistor. A transistor, stands for transfer of resistance, is commonly used to amplify current. A small current at its base controls a larger current at collector & emitter terminals.

    BC547 transistor

    NPR 5.00
  • Quick View
  • Quick View
    (0)

    Big Button Module

    NPR 100.00
  • -79%
    Quick View
  • Quick View
    (0)

    HC-05 module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup. Serial port Bluetooth module is fully qualified Bluetooth V2.0+EDR (Enhanced Data Rate) 3Mbps Modulation with complete 2.4GHz radio transceiver and baseband.

    Bluetooth Module HC-05

    NPR 990.00
  • -22%
    Quick View
    (0)

    Barometric Pressure sensor measures the absolute pressure of the air around it. This pressure varies with both the air and altitude. Depending upon the interpretation of the data, changes in the weather can be monitored, altitude can be measured, and any task can be done that requires the accurate pressure measurement.

    BMP 180 (Pressure Sensor)

    NPR 350.00
  • Quick View
    (0)
    • Pressure range: 300 ~ 1100hPa (altitude 9000 m ~ -500 m);
    • Working voltage: 1.71 – 3.6VDC;
    • Low power consumption: 4μA;
    • High precision: at low-power mode, the resolution is 0.06hPa (0.5 meters);
    • Temperature output;
    • Communication interface: I2C or SPI;

    BMP 280

    NPR 350.00
  • Quick View
  • Quick View
  • Quick View
    (0)

    Single row of 40-holes, female header with swiss round machined pins. These units have very high quality round pins to accept and retain machine pin headers much better. Can be cut to size with a pair of wire-cutters. Standard .1″ spacing. We use them extensively in the Olimex development boards. They mate very well with break away headers.

    Breakable Female Header Pin

    NPR 90.00
  • Quick View
    (0)

    A pin header (or simply header) is a form of electrical connector. It consists of one or more rows of male pins typically spaced 2.54 millimetres (0.1 in) apart, but sometimes 2 millimetres (0.079 in) or 1.27 millimetres (0.05 in) is used as well. The distance between pins is commonly referred as pitch in the electronic community.

    Breakable Male Header Pin

    NPR 60.00
  • Quick View
  • Quick View
    (0)

    Motors provide excellent performance, quality, and dependability at an affordable price. Manufactured with high quality bearings and components, brushless motors are some of the smoothest and most powerful in their class.

    Brushless Motor 1000 KV (A2212/10T)

    NPR 1,280.00
  • -27%
    Quick View
  • Quick View
  • Quick View
    (0)

    42R 12*8.5mm 3V/5V general

    Passive buzzer advantages are:

    1. Cheap,
    2. Sound frequency control, you can make a “more than a meter hair Suola Xi ‘efficiency Fruit.
    3. In some special cases, you can reuse a control and LED port active buzzer
    4. Process control, Convenient.

    Buzzer

    NPR 60.00
  • Quick View
    (0)

    C1815

    NPR 5.00
  • Quick View
    (0)
    • Hole distance: 16MM
    • Aperture: 2.5MM
    • Voltage range: 2.4-5V
    • Maximum output current: 500MA
    • PCB size: L23MM *W20MMThe lamp brightness can be adjusted by requirement, it is very to operate.
      It can touch in medium protection, such glass, acrylic, plastic, ceramics and so on, which is very safe.
      Wide application of voltage range, you can choose arbitrarily between 2.4V to 4.5V.
      Simple applied circuit, less peripheral devices, easy processing, low cost.
      Anti power and phone interference, the EFT can reach above +/-2KV; the touch response sensitivity and reliability will not affected by the close distance or multi-angle mobile phone interference.
      Install: Neednrsquo;t to touch copper foil directly,the dimming can be processed across the acrylic glass(above 3mm) or plastic.
      Application: It can control LED module, light and so on.It is available for indoor LED, lighting lamp,DIY automotive lights dimming refit.
      Function:Single touch,using the principle of capacitance touch.The default function is switch, dimming, with brightness memories LED touch dimming.It will light slowly when turn on the lights, and become dark slowly when turn off, which effectively avoid the stimulation to eyes.
      Dimming mode: Non-polar PWM dimming.
      Wiring method: PCB board(VCC,GND) is power input,(LED+, LED-) is connected with the LED lamps of positive and negative level (fingerprint) touch area.

    Capacitive Touch Dimmer

    NPR 250.00
  • Quick View
    (0)

    This box contains the commonly used ceramic capacitors from picoFarad to nanoFarad

    Capacitor Box

    NPR 150.00
  • Quick View
    (0)
    This is Carbon Monoxide sensor is suitable for sensing CO concentrations in the air. The MQ-7 can detect CO-gas concentrations anywhere from 20 to 2000ppm.This sensor has a high sensitivity and fast response time. The sensor’s output is an analog resistance. The drive circuit is very simple; all you need to do is power the heater coil with 5V, add a load resistance, and connect the output to an ADC.

    Carbon Monoxide Sensor (MQ7 | MQ-7)

    NPR 550.00
  • Quick View
    (0)

    The CD4047 is a low-powered monostable/astable multivibrator IC. The CD4047 IC allows a positive or negative edge-triggered monostable multivibrator mode with retriggering and external counting options.

    CD 4047

    NPR 110.00
  • Quick View
    (0)
    Basically a 7 segment display is a single unit, which can display only 1 digit or 1 character. More digits are displayed by multiplexing single unit 7 segment displays together to form 2 digit display, 3 digit display or 4 digit 7 segment display. Its quiet easy to interface Arduino and 7 Segment display together!

    Common Anode 10 pin 1 bit 7 segment display

    NPR 40.00
  • Quick View
    (0)

     Conductive ink pen helps you to come out with the stroke of a circuit diagram that can conduct electricity, so that if everything will become more wonderful and funny, as  you have already been tired of the traditional way about drawing a circuit diagram and want to try some new things. It uses autonomic modulation paint named Buddy, the main ingredient is silver conductive copper mixed powder and nickel powder, it can conduct electricity in two or three minutes after air-dried. With its superior performance, you can do more simple or complex electronic production.

  • Note: Shake well before using and you need to maintain a continuous and uniform line when you write, if still not conducting, you’d better to check and find the break by using the multi-meter.

Conductive Ink Pen

NPR 2,500.00