Best Seller Items
Featured Items
-
60 rpm geared motor
NPR 799.00This is 60 rpm small metal geared motor which runs on 6V-9V power supply. Highly used for robotics and electronic projects.
-
Wireless WiFi Receiver/Adapter with wifi Antenna
NPR 799.00-
Wireless speed up to 150Mbps, ideal for internet surfing and on-line gaming
-
Complies with IEEE 802.11n (Draft 2.0), IEEE 802.11g, IEEE 802.11b standards.
-
Supports 64/128-bit WEP, as well as WPA/WPA2 and WPA-PSK/WPA2-PSK encryptions
-
Supports WIN XP, VISTA, WIN7/8/10 operating system
-
Wireless Standards: IEEE 802.b/g/n
-
Frequency range: 2.4GHz
-
-
-
Raspberry pi Zero Case
NPR 800.00The Raspberry Pi Zero Case is a perfect fit for Raspberry Pi Zero, Raspberry Pi Zero W, and Raspberry Pi Zero 2 W.
-
Raspberry Pi GPIO Extension Board v3.0 + cable
NPR 800.00This is a T-type breakout kit used for extending the GPIO interface on Raspberry Pi to the breadboard. It helps you to make the connections between Raspberry Pi and breadboard become simple.
The kit comes with a 26 pin ribbon cable and an adapter board. Compatible with both Raspberry Pi revision A and revision B.
-
Digital Light Sensor Module (TSL2561)
NPR 800.00This module is based on the I2C light-to-digital converter TSL2561 to transform light intensity to a digital signal. Different from the traditional analog light sensor, this digital module features a selectable light spectrum range due to its dual light-sensitive diodes: infrared and full spectrum.
You can switch among three detection modes to take your readings. They are infrared mode, full spectrum, and human visible mode. When running under the human visible mode, this sensor will give you readings just close to your eye feelings.
-
Wireless TXRX – ESP8266 (Serial Wireless Module)
NPR 800.00In terms of the form factor, it looks a lot like the nRF24L01 2.4G RF transceiver. This is a serial module with a built-in TCP/IP stack, so you can use it standalone but you will be likely limited. You need a FTDI to connect this module to your computer, and start communicating with it. FTDI is a common name for USB-to-TTL (or serial) converter.
-
20×4 LCD module
NPR 800.00(1) Display mode: STN POSITIVE, TRANSFLECTIVE, YELLOW-GREEN COLOR
(2) Display format: 20 characters X 4 line
(3) Driving method: 1/16 Duty, 1/5 Bias
(4) Viewing direction: 6 o’clock
(5) Control IC: SPLC780D
(6) Interface Input Data : 4-Bits or 8-Bits interface available
(7) Back light: LED (Yellow-Green )
-
VGA OV7670 Camera Module Lens for Arduino
NPR 800.00Feature:
High sensitivity for low-light operation.
Low operating voltage for embedded application.
Standard SCCB interface compatible with I2C interface.
Raw RGB, RGB (GRB4:2:2, RGB565/555/444),YUV(4:2:2) and YCbCr(4:2:2)output format.More Features:
Support VGA, CIF and from CIF to 40 x 30 format.
Vario Pixel method for sub-sampling.
Auto Image Control: AEC, AGC, AWB, ABF, ABLC.
Image Quality Control: Color saturation, hue, gamma, sharpness and anti-blooming.
ISP includes noise reduction and defect correction.
Support image scaling.
Lens shading correction.
Flicker 50/60Hz auto detection.
Color saturation level auto adjust.
Edge enhancement level auto adjust.
De-noise level auto adjust. -
Original Case for Raspberry Pi 3
NPR 800.00Special ‘easy to use’ casing for Raspberry Pi 2 and also Pi 3 Model B which is the second generation Raspberry Pi.
-
T-Cobbler Plus v2.2 Cable T-GPIO Expansion Board for Raspberry Pi
NPR 800.00Features:
- Durable product
- Made from good material
- Good product to use
-
MAX31865 RTD Platinum Resistance Temperature Detector Module (PT100 to PT1000)
NPR 850.00MAX31865 RTD Platinum Resistance Temperature Detector PT100 to PT1000
The MAX31865 is an easy-to-use thermistor-to-digital output converter optimized for platinum resistance temperature detectors (RTDs). The external resistor sets the RTD sensitivity, and the high precision Δ- Σ ADC converts the ratio of the RTD resistor to the reference resistor into a digital output. The MAX31865 has overvoltage protection up to ±45V and provides configurable RTD and cable open and short-circuit condition detection.
-
TowerPro MG995 Metal Gear Servo Motor (180º Rotation) (55G)
NPR 850.00It has metal gears which makes it robust and reliable motors. These TowerPro MG995 Metal Gear Servo Motors are the high-speed servo motors with the mighty torque of 10 kg/cm.
The optimized performance and reliability of this servo have made it the favorite choice of many RC hobbyists.
The TowerPro MG995 High-Speed Digital Servo Motor rotates 90° in each direction making it 180° servo motor. It is a Digital Servo Motor which receives and processes PWM signal faster and better. It equips sophisticated internal circuitry that provides good torque, holding power, and faster updates in response to external forces.
They are packed within a tight sturdy plastic case which makes them water and dust resistant which is a very useful feature in RC planes, Boats, and RC Monster Trucks etc. It equips 3-wire JR servo plug which is compatible with Futaba connectors too.
-
USB Range Extender (USB – Ethernet Connector)
NPR 850.00Extend your USB connection plugging in any ethernet cable of any length.
-
Waterproof ultrasonic sensor
NPR 890.00Take your sonar outside – great for all weather robots! The XL-MaxSonar-WRMA1 ignores smaller targets and only reports the range to target with the largest acoustic return. This is our most advanced weather resistant sensor designed for target detection and ranging outdoors or in tank or bin applications.
-
Arduino Pro Mini
NPR 899.00Microcontroller:ATmega328
Operating Voltage:3.3V or 5V (depending on model)
Input Voltage:3.35 -12 V (3.3V model)or 5 – 12 V (5V model)
Digital I/O Pins:14 (of which 6 provide PWM output)
Analog Input Pins:6
DC Current per I/O Pin:40 mA
Flash Memory32 kB (of which 0.5 kB used by bootloader)
SRAM:2 kB
EEPROM:1 kB
Clock Speed:8 MHz (3.3V model) or 16 MHz (5V model)
