Best Seller Items
Featured Items
-
The Official Raspberry Pi power supply
Easily interchangeable heads for the UK, US, EU and Australia you can now use your Pi in all four corners of the world!
- +5.1V 2.5A output provides all the power your Pi will need
- 1.5m cable gives your Pi room to manoeuvre
- Micro USB connection goes straight into your Pi’s power supply
Official Raspberry Pi 3 Universal Power Supply
NPR 2,000.00 -
This single relay module can be used to control lighting, electrical and other 220V equipment from an Arduino digital output.
One Channel Relay Module (5V)
NPR 250.00 -
- Pitch: 2mm (GT2)
- Material: Neoprene Rubber With Fiberglass Core
- Width: 6mm
- Total Length: 1M
- Shape: Open Loop
- Core Wire Material: Rubber
Open Timing Belt (2mm*6mm*1M)
NPR 250.00 -
Special ‘easy to use’ casing for Raspberry Pi 2 and also Pi 3 Model B which is the second generation Raspberry Pi.
Original Case for Raspberry Pi 3
NPR 800.00 -
1.Advanced Micro Devices, volume: 1.85 * 211cm
2.Excellent noise suppression in the case is not connected to the input audio, the ear close to the speaker can not hear any noise
3.Two-channel stereo, 5V power supply can output 3W +3 W power, can directly drive 4 8 small speaker output power, full of energy, good sound quality.
4.Unique without LC filter Class D digital power board, and can be used directly to the computer’s USB powered.
5.Dual-panel wiring, properly solve the crosstalk between the ground potential balance and channel wiring.
6.Ultra-miniature design, can easily be placed in the internal space for a variety of digital products, ultra high zoom efficiency.
7.All using the machine for the entire board soldering, hand soldering iron welding quality comparable!
PAM8403 module Super mini digital amplifier board 2 * 3W Class D digital amplifier board efficient 2.5 to 5V USB power
NPR 140.00 -
Printed circuit board is the most common name but may also be called “printed wiring boards” or “printed wiring cards”.
Dimension: 105 mm * 70 mm * 1.5mm.
The board is printable on both sides.
PCB board – single Sided – (10.5cm X 7cm)
NPR 100.00 -
-
Peltier module (thermoelectric module) is a thermal control module that has both “warming” and “cooling” effects. By passing an electric current through the module, it is possible to change the surface temperature and keep it at the target temperature.
Peltier Thermo-Electric Cooler Module
NPR 2,200.00 -
It is the matrix of a large number of pores containing small metal surface that can be used for making connections by soldering. No need to print the circuit..
Dimension: 2 in. x 3 in.
Perforated Board (Small Size) 2″x3″
NPR 30.00 -
It is the matrix of a large number of pores containing small metal surface that can be used for making connections by soldering. No need to print the circuit..
Dimension: 4 in. x 3 in. It is the medium sized one.
Perforated Matrix Board (PCB) (3″ * 4″)
NPR 40.00 -
The Raspberry Pi B+ / Pi 2 / Pi 3 / Pi 4 has landed on the Maker World as a 40-GPIO pinned, quad-USB ported, credit card-sized bomb of DIY joy. it’s probably a good time to upgrade your setup and accessorize using all of the Model B+’s / Pi 2’s / Pi 3 / Pi 4’s 40 pins.
That’s why we now carry the Adafruit Assembled Pi Cobbler Plus – Breakout and Cable for Raspberry Pi A+, B+, Pi 2, Pi 3, and Pi 4. It’s an add-on prototyping Pi Cobbler from Adafruit specifically designed for the B+ and Pi 2 that you can break out all those tasty power, GPIO, I2C, and SPI pins from the 40-pin header onto a solderless breadboard. This will make “cobbling together” prototypes with the Pi super easy.
Designed for use with Raspberry Pi Model A+/B+/Pi 2/Pi 3/Pi 4 only! No soldering is required!
Pi Cobbler B+ (Adafruit)
NPR 900.00 -
A passive infrared sensor (PIR sensor) is an electronic sensor that measures infrared (IR) light radiating from objects in its field of view. They are most often used in PIR-based motion detectors.
For most of our Arduino projects that need to detect when a person has left or entered the area, or has approached, HC-SR501 PIR sensors are a great choice. They are low power and low cost, pretty rugged, have a wide lens range, easy to interface with and are insanely popular among hobbyists.
HC-SR501 PIR sensor has three output pins VCC, Output and Ground as shown in the diagram below. It has a built-in voltage regulator so it can be powered by any DC voltage from 4.5 to 12 volts, typically 5V is used. Other than this, there are a couple options you have with your PIR.
PIR Sensor HC-SR501
NPR 250.00 -
Piezo buzzers are simple devices that can generate basic beeps and tones. They work by using a piezo crystal, a special material that changes shape when voltage is applied to it. If the crystal pushes against a diaphragm, like a tiny speaker cone, it can generate a pressure wave which the human ear picks up as sound.
Pizeo Buzzer
NPR 90.00 -
At the heart of all piezo-type buzzers is the piezoelectric element. The piezoelectric element is composed of a piezoelectric ceramic and a metal plate held together with adhesive. Both sides of the piezoelectric ceramic plate contain an electrode for electrical conduction.
Pizeo Buzzer Plate
NPR 40.00 -
current Rating : 12VCurrent type: DCSupply Voltage: 12VMounting Style: 5vsound level : 85dbPizeo HCDz-12095
NPR 45.00
