Best Seller Items
Featured Items
-
High Quality Connectors with Female heads on both side.
Female to Female High Quality (20cm Jumper Wire)
NPR 7.00 -
While many connectors carry power in addition to data, some connectors are used specifically to provide power connections to devices. These vary widely by application and size.
Male to Male Connector (Jumper Wire Cable)
NPR 7.00 -
Upgrade your access control and payment systems with the power of 13.56MHz High-Frequency NFC technology. Secure, convenient, and adaptable, our NFC card is the ideal choice for businesses, organizations, and individuals looking to streamline their operations and enhance security. Unlock the future of access control today!
Order your High-Frequency NFC Cards (13.56MHz) now and experience a new level of convenience and security. Contact us for bulk orders or customization options tailored to your specific needs.
13.6 Mhz NFC Card
NPR 85.00 -
BC547 is an NPN bi-polar junction transistor. A transistor, stands for transfer of resistance, is commonly used to amplify current. A small current at its base controls a larger current at collector & emitter terminals.
BC547 transistor
NPR 5.00 -
Features:
– Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
– Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
– Highest shrink ratio – shrinks to 1/3 original size
– Shrinks at 257 deg F / 125 deg C
– Operating temperature range of -40 deg C to 110 deg C
– UL 224Adhesive Lined Heat Shrink Tubing
NPR 5.00 -
A level shifter translates logic signals from one level to another. Usually, this shift takes place between 5V and 3.3V, but you can use other voltages as needed, such as 2.5V or 1.8V.
Logic Level Shifter
NPR 100.00 -
Specification:
Rated Current: 20A
Max. Voltage: AC250V
Diameter: 5mm
Length: 20mmGlass Fuse 20A
NPR 30.00 -
This module is a soil moisture detector sensor module + it has corrosion resistance probe which are compatible with the Arduino. This soil moisture sensor can read the amount of the moisture present in the surrounding soil.This soil moisture arduino compatible sensor uses the two probe to pass the current through the soil, as if in the soil more water is present than that soil will conduct the electricity more easily like less resistance will be offered and if the soil is dry than that soil will offer more resistance and soil conduct electricity will be poor. This Moisture Sensor can be used to detect the moisture of soil or judge if there is water around the sensor, let the plants in your garden reach out for human help. They can be very to use, just insert it into the soil and then read it. With help of this sensor, it will be realizable to make the plant remind you. if there is requirement of water or not. This module requires input supply voltage of 3.3 – 5VDC and its working current is less than 20mA. This soil humidity detection module includes a potentiometer and soil moisture thresholds.
Soil Moisture Sensor and Soil Detector Module Soil Moisture Test Soil Moisture Test Corrosion Resistance Probe for Arduino
NPR 750.00 -
Using IO port trig trigger location, to the high level signal of at least 10us module automatically sends 8 40khz fang bo, automatic detecting whether a signal return. A signal return, a high level is output through the io port echo, the time duration of the high level is ultrasonic from launch to return. The test distance = (high level time * speed of sound (340m/s)) /2ranging, the measured object area of not less than 0. 5 square meters and the plane as required to smooth, otherwise affect the measurement results.
JSN-SR40T Ultrasonic Ranging Sensor Module
NPR 1,800.00 -
Push once to turn on, push again to turn off, push again to turn the other side on, one last push and it’s off again! It’s basically a push-button toggle switch that connects and disconnects.
Self-Lock Micro On/Off Push Button Switch
NPR 20.00 -
Technical specification
Supply: 5 V
Power consumption: 0.4 to 1.0 mA
Min. Ee irradiation: 0.35 mW/m2 typ.
Angle of detection: 90
Temperature range: -25 C to +85 CTSOP1838 IR Receiver
NPR 40.00 -
-16%
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins , 16 analog inputs, 4 UARTs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller.
Genuine Arduino Mega 2560 R3(Italy)
NPR 5,400.00 -
The Arduino Micro is essentially a shrunk-down (1.9″ × 0.7″) version of the Arduino Leonardo: it is a microcontroller board based on the ATmega32U4 running at 16 MHz with 24 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs). This board ships with the male header pins soldered in.
Arduino Micro Pro R3
NPR 1,900.00 -
-
Photo resistors, also known as light dependent resistors (LDR), are light sensitive devices most often used to indicate the presence or absence of light, or to measure the light intensity.
LDR Sensor
NPR 25.00 -
Ideal for making very small USB dongle devices that plug directly into a computer USB port or through a USB AtoA extension cable.
USB Connector Male Type A
NPR 35.00 -
-14%
- IR Infrared Obstacle Avoidance Sensor Module can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, and black and white line tracking and so on
- the module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted.
- Can be used for 3-5V DC power supply modules.
IR Infrared Obstacle Avoidance Sensor Module
NPR 300.00 -
Brand new RC screw set containing a total of 49 pieces of silver color screws for Syma X5, X5C and X5C-1.
Drone Screw Set
NPR 200.00 -
-
The 2N3904 is a common NPN bipolar junction transistor used for general-purpose low-power amplifying or switching applications. It is designed for low current and power, medium voltage, and can operate at moderately high speeds. This transistor is low-cost, widely available and sufficiently robust to be of use by experimenters and electronics hobbyists.
2N3904 transistor
NPR 5.00 -
This 1M Trimpot will give you a variable resistance. Just turn to change the resistance to the value you need.
1M Ohm Potentiometer
NPR 20.00 -
Specification:
Rated Current: 30A
Max. Voltage: AC250V
Diameter: 5mm
Length: 20mmGlass Fuse 30A
NPR 30.00 -
-
The 7805 Voltage Regulator IC is a commonly used voltage regulator that finds its application in most of the electronics projects. It provides a constant +5V output voltage for a variable input voltage supply
L 7805CV Voltage Regulator IC
NPR 40.00 -
The NEO-6 module series brings the high performance to the miniature NEO form factor. It has been designed with low power consumption and low costs in mind. Intelligent power management is a breakthrough for low-power applications.
It can track up to 22 satellites on 50 channels and achieves the industry’s highest level of sensitivity i.e. -161 dB tracking, while consuming only 45mA supply current. The u-blox 6 positioning engine also boasts a Time-To-First-Fix (TTFF) of under 1 second.
Neo-6M-0-001 V2 with ceramic antenna (GPS Module)
NPR 2,200.00 -
Stepper Motor is a motor controlled by a series of electromagnetic coils. The center shaft has a series of magnets mounted on it, and the coils surrounding the shaft are alternately given current or not, creating magnetic fields which repulse or attract the magnets on the shaft, causing the motor to rotate.
Stepper Motor 28BYJ-48 5v
NPR 420.00 -
9 Volt battery connector with 6 inches red and black leads. Great for electronics and hobby projects or classroom use. Box Size: 1.00in (2.54cm) x 0.50in (1.27cm) x 0.25in (0.64cm) Recommended for ages 7 and older.
Socket 9V (Battery Cap)
NPR 25.00 -
-
-
The 2N2222 is a common NPN bipolar junction transistor (BJT) used for general purpose low-power amplifying or switching applications. It is designed for low to medium current, low power, medium voltage, and can operate at moderately high speeds.
2N2222A transistor
NPR 5.00 -
This box contains the commonly used ceramic capacitors from picoFarad to nanoFarad
Capacitor Box
NPR 150.00 -
An open-source firmware and development kit that helps you to prototype your IOT product within a few Lua script lines.
Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled.
NodeMCU CP2102 (Arduino Like Hardware)
NPR 1,250.00 -
The MAX30102 is an integrated pulse oximetry and heart-rate monitor biosensor module. It includes internal LEDs, photodetectors, optical elements, and low-noise electronics with ambient light rejection. The MAX30102 provides a complete system solution to ease the design-in process for mobile and wearable devices.The MAX30102 operates on a single 1.8V power supply and a separate 5.0V power supply for the internal LEDs. Communication is through a standard I2C-compatible interface. The module can be shut down through software with zero standby current, allowing the power rails to remain powered at all times.
MAX30102 stop and heart beat sensor
NPR 600.00 -
-
-
The 555 timer IC is an integrated circuit (chip) used in a variety of timer, pulse generation, and oscillator applications. The 555 can be used to provide time delays, as an oscillator, and as a flip-flop element. Derivatives provide up to four timing circuits in one package.
NE555 Timer Ic
NPR 30.00 -
This is your tried and true white solderless breadboard. It has 2 power buses, 10 columns, and 30 rows – a total of 400 tie in points.
Mini Breadboard High Quality
NPR 160.00 -
This is your tried and true white solderless breadboard. It has 2 power buses, 10 columns, and 60 rows – a total of 800 tie in points.
All pins are spaced by a standard 0.1″. The two sets of five columns are separated by about 0.3″, perfect for straddling a DIP package over. The board accepts wire sizes in the range of 29-20AWG.
This board also has a self-adhesive on the back. The boards also have interlocking parts, so you can hook as many together as you’d like.
Large Breadboard (High Quality)
NPR 250.00 -
It is the matrix of a large number of pores containing small metal surface that can be used for making connections by soldering. No need to print the circuit..
Dimension: 4 in. x 3 in. It is the medium sized one.
Perforated Matrix Board (PCB) (3″ * 4″)
NPR 40.00 -
This GSM Modem can accept any GSM network operator SIM card and act just like a mobile phone with its own unique phone number. Advantage of using this modem will be that you can use its RS232 port to communicate and develop embedded applications. Applications like SMS Control, data transfer, remote control and logging can be developed easily.
SIM 800L Module
NPR 1,500.00 -
Features:
-
Brand new and high quality.
-
High conversion rate.
-
High-efficiency output.
-
Excellent weak light effect.
-
Voltage: 6V
-
Power: 1W.
-
Material: Polysilicon.
Mini Solar Cell Solar Panel (6V | 1 W) (110mm * 60mm)
NPR 500.00 -
-
It is an economical and easy to use heating equipment for melting the soldering wire that contains a pointed tip which enables to make fine solder joints.
Solder Iron (220V – 60W)
NPR 500.00 -
The TCRT5000 are reflective sensors which include an infrared emitter and phototransistor in a leaded package which blocks visible light. The package includes two mounting clips.TCRT5000 sensor works with the general infrared sensor, like a sense of a TCRT5000 has an infrared emission tube and an infrared receiver tube.TCRT5000 Reflective Infrared Optical Sensor
NPR 75.00
