• Quick View
  • Quick View
    (0)

    Different values of resistors are available. Please specify which values are needed through message. The quantity must be a multiple of 5.

    Resistors

    NPR 2.00
  • Quick View
    (0)

    While many connectors carry power in addition to data, some connectors are used specifically to provide power connections to devices. These vary widely by application and size.

    Male to Male Connector (Jumper Wire Cable)

    NPR 7.00
  • Quick View
    (0)

    High Quality Connectors with Female heads on both side.

    Female to Female High Quality (20cm Jumper Wire)

    NPR 7.00
  • Quick View
    (0)

    Upgrade your access control and payment systems with the power of 13.56MHz High-Frequency NFC technology. Secure, convenient, and adaptable, our NFC card is the ideal choice for businesses, organizations, and individuals looking to streamline their operations and enhance security. Unlock the future of access control today!

    Order your High-Frequency NFC Cards (13.56MHz) now and experience a new level of convenience and security. Contact us for bulk orders or customization options tailored to your specific needs.

    13.6 Mhz NFC Card

    NPR 75.00
  • Quick View
    (0)

    Features:

    – Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
    – Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
    – Highest shrink ratio – shrinks to 1/3 original size
    – Shrinks at 257 deg F / 125 deg C
    – Operating temperature range of -40 deg C to 110 deg C
    – UL 224

    Adhesive Lined Heat Shrink Tubing

    NPR 5.00
  • Quick View
    (0)

    A level shifter translates logic signals from one level to another. Usually, this shift takes place between 5V and 3.3V, but you can use other voltages as needed, such as 2.5V or 1.8V.

    Logic Level Shifter

    NPR 100.00
  • Quick View
    (0)

    Specification:

    Rated Current: 20A
    Max. Voltage: AC250V
    Diameter: 5mm
    Length: 20mm

    Glass Fuse 20A

    NPR 30.00
  • Quick View
    (0)

    This module is a soil moisture detector sensor module + it has corrosion resistance probe which are compatible with the Arduino. This soil moisture sensor can read the amount of the moisture present in the surrounding soil.This soil moisture arduino compatible sensor uses the two probe to pass the current through the soil, as if in the soil more water is present than that soil will conduct the electricity more easily like less resistance will be offered and if the soil is dry than that soil will offer more resistance and soil conduct electricity will be poor. This Moisture Sensor can be used to detect the moisture of soil or judge if there is water around the sensor, let the plants in your garden reach out for human help. They can be very to use, just insert it into the soil and then read it. With help of this sensor, it will be realizable to make the plant remind you. if there is requirement of water or not. This module requires input supply voltage of 3.3 – 5VDC and its working current is less than 20mA. This soil humidity detection module includes a potentiometer and soil moisture thresholds.

    Soil Moisture Sensor and Soil Detector Module Soil Moisture Test Soil Moisture Test Corrosion Resistance Probe for Arduino

    NPR 750.00
  • Quick View
    (0)

    ATMEL 20U TINY 85 2106HQU

    ATTINY85

    NPR 800.00
  • Quick View
    (1)

    Using IO port trig trigger location, to the high level signal of at least 10us module automatically sends 8 40khz fang bo, automatic detecting whether a signal return. A signal return, a high level is output through the io port echo, the time duration of the high level is ultrasonic from launch to return. The test distance = (high level time * speed of sound (340m/s)) /2ranging, the measured object area of not less than 0. 5 square meters and the plane as required to smooth, otherwise affect the measurement results.

    JSN-SR40T Ultrasonic Ranging Sensor Module

    NPR 1,800.00
  • Quick View
    (0)

    Push once to turn on, push again to turn off, push again to turn the other side on, one last push and it’s off again! It’s basically a push-button toggle switch that connects and disconnects.

    Self-Lock Micro On/Off Push Button Switch

    NPR 20.00
  • Quick View
  • -16%
    Quick View
    (0)

    The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins , 16 analog inputs, 4 UARTs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller.

    Genuine Arduino Mega 2560 R3(Italy)

    NPR 5,400.00
  • Quick View
    (0)

    The Arduino Micro is essentially a shrunk-down (1.9″ × 0.7″) version of the Arduino Leonardo: it is a microcontroller board based on the ATmega32U4 running at 16 MHz with 24 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs). This board ships with the male header pins soldered in.

    Arduino Micro Pro R3

    NPR 1,900.00
  • Quick View
    (0)

    It is a 8 pin IC base or 8 pin IC socket for mounting 8 pin ICs.

    8 pin IC base

    NPR 15.00
  • Quick View
    (0)

    Photo resistors, also known as light dependent resistors (LDR), are light sensitive devices most often used to indicate the presence or absence of light, or to measure the light intensity.

    LDR Sensor

    NPR 25.00
  • Quick View
    (0)

    Ideal for making very small USB dongle devices that plug directly into a computer USB port or through a USB AtoA extension cable.

    USB Connector Male Type A

    NPR 35.00
  • -14%
    Quick View
    (0)
    •    IR Infrared Obstacle Avoidance Sensor Module can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, and black and white line tracking and so on
    •          the module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted.
    •          Can be used for 3-5V DC power supply modules.

    IR Infrared Obstacle Avoidance Sensor Module

    NPR 300.00
  • Quick View
    (0)

    Brand new RC screw set containing a total of 49 pieces of silver color screws for Syma X5, X5C and X5C-1.

    Drone Screw Set

    NPR 200.00
  • Quick View
    (0)

    Yellow Basic Led 5mm

    NPR 5.00
  • Quick View
    (0)

    The 2N3904 is a common NPN bipolar junction transistor used for general-purpose low-power amplifying or switching applications.  It is designed for low current and power, medium voltage, and can operate at moderately high speeds. This transistor is low-cost, widely available and sufficiently robust to be of use by experimenters and electronics hobbyists.

    2N3904 transistor

    NPR 5.00
  • Quick View
    (0)

    Specification:

    Rated Current: 30A
    Max. Voltage: AC250V
    Diameter: 5mm
    Length: 20mm

    Glass Fuse 30A

    NPR 30.00
  • Quick View
    (0)

    An IoT connected IMU sensor in the Nano form factor.

    Arduino Nano 33 IoT wo headers

    NPR 7,015.00
  • Quick View
    (0)

    The NEO-6 module series brings the high performance to the miniature NEO form factor. It has been designed with low power consumption and low costs in mind. Intelligent power management is a breakthrough for low-power applications.

    It can track up to 22 satellites on 50 channels and achieves the industry’s highest level of sensitivity i.e. -161 dB tracking, while consuming only 45mA supply current. The u-blox 6 positioning engine also boasts a Time-To-First-Fix (TTFF) of under 1 second.

    Neo-6M-0-001 V2 with ceramic antenna (GPS Module)

    NPR 2,200.00
  • Quick View
    (0)

    Stepper Motor  is a motor controlled by a series of electromagnetic coils. The center shaft has a series of magnets mounted on it, and the coils surrounding the shaft are alternately given current or not, creating magnetic fields which repulse or attract the magnets on the shaft, causing the motor to rotate.

    Stepper Motor 28BYJ-48 5v

    NPR 420.00
  • Quick View
    (0)

    9 Volt battery connector with 6 inches red and black leads. Great for electronics and hobby projects or classroom use. Box Size: 1.00in (2.54cm) x 0.50in (1.27cm) x 0.25in (0.64cm) Recommended for ages 7 and older.

    Socket 9V (Battery Cap)

    NPR 25.00
  • Quick View
  • Quick View
    (0)

    Big Button Module

    NPR 100.00
  • Quick View
    (0)

    The 2N2222 is a common NPN bipolar junction transistor (BJT) used for general purpose low-power amplifying or switching applications. It is designed for low to medium current, low power, medium voltage, and can operate at moderately high speeds.

    2N2222A transistor

    NPR 5.00
  • Quick View
    (0)

    BC547 is an NPN bi-polar junction transistor. A transistor, stands for transfer of resistance, is commonly used to amplify current. A small current at its base controls a larger current at collector & emitter terminals.

    BC547 transistor

    NPR 5.00
  • Quick View
    (0)
    The MAX30102 is an integrated pulse oximetry and heart-rate monitor biosensor module. It includes internal LEDs, photodetectors, optical elements, and low-noise electronics with ambient light rejection. The MAX30102 provides a complete system solution to ease the design-in process for mobile and wearable devices.

    The MAX30102 operates on a single 1.8V power supply and a separate 5.0V power supply for the internal LEDs. Communication is through a standard I2C-compatible interface. The module can be shut down through software with zero standby current, allowing the power rails to remain powered at all times.

    MAX30102 stop and heart beat sensor

    NPR 600.00