1. The recommended power is 12V. (3CELL lithium polymer battery)
2. GOPRO camera must be fixed on the head. (No loose, very important)
3. Adjust GOPRO camera left or right, so that the camera is level.
4. Do not power on GOPRO camera before fixing on the head
1. Remove the damping ball, open the top cover of the mounting plate.
2. Place the pan on the bottom plate is mounted to the DJI elves, screwed.
3. Install the damping ball.
4. Install your GOPRO camera, and then tied with fixed
1 x 2 Axis Brushless gimbal with controller
1 x Camera fix Strap
1 x JST plug / XH-2.54 Plug
1 x 5pin cable connector
1 x Screw set