module

Default sorting
Show
16
  • Quick View
    (0)
    Modules

    This capacitive touch sensor module uses the TTP229 integrated circuit, making it easy to add capacitive touch input for projects. It features 16 sensitive touch pads that make an ideal replacement for the traditional keypads.

    16 Channel Digital Capacitive Switch Touch Sensor Module

    NPR 350.00
  • Quick View
    (0)
    Modules

    Remote control

    Operating voltage: DC12V (27A/12V battery x1)

    Operating Current: 10mA @ 12V

    Radiated power: 10mw @ 12V

    Modulation mode: ASK (Amplitude Modulation)

    Transmitting frequency: 315MHZ (SAW frequency stabilization)

    Transmission distance :50-100M (Open field the receiver sensitivity -100dbm)

    Encoder types: fixed code

    The frequency of this product is 315 mhz.

    315MHZ Wireless 4 Channel Key Remote Control Receiver Module

    NPR 700.00
  • Quick View
    (0)
    Relay

    This is a 5V 4-channel relay or four channel relay module interface board, and each channel needs a 15-20mA driver current. It can be used to control various appliances and equipment with large current. It is equiped with high-current relays that work under AC250V 10A or DC30V 10A. It has a standard interface that can be controlled directly by microcontroller.

    • Size: 75mm (Length) * 55mm (Width) * 19.3mm (Height)
    • Weight: 61g
    • PCB Color: Blue
    • There are four fixed screw holes at each corner of the board, easy for install and fix. The diameter of the hole is 3.1mm 
    • High quality Songle relay is used with single pole double throw, a common terminal, a normally open terminal, and a normally closed terminal 
    • Optical coupling isolation, good anti-interference.
    • Closed at low level with indicator on, released at high level with indicator off
    • VCC is system power source, and JD_VCC is relay power source. Ship 5V relay by default. Plug jumper cap to use
    • The maximum output of the relay: DC 30V/10A, AC 250V/10A

    4 Channel Relay Module (5v)

    NPR 500.00
  • Quick View
    (0)
    Laser

    • Outer diameter: 6 mm

    • Wavelength: 650nm

    • Working Voltage: 5 volts

    • 5 mW

    650 nm space 5mW 5v Laser Dot Diode

    NPR 75.00
  • Quick View
    (0)
    Laser

    650nm Laser Diode Module

    NPR 180.00
  • Quick View
    (0)
    Modules

    Big Button Module

    NPR 100.00
  • Quick View
    (0)
    Modules

    The module based on DS1307, The DS1307 serial real-time clock (RTC) is a low-power, full binary-coded decimal (BCD) clock/calendar plus 56 bytes of NV SRAM. Address and data are transferred serially through an I²C, bidirectional bus. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The end of the month date is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in either the 24-hour or 12-hour format with AM/PM indicator. The DS1307 has a built-in power-sense circuit that detects power failures and automatically switches to the backup supply. Timekeeping operation continues while the part operates from the backup supply.

    DS1307 RTC 12C modules

    NPR 300.00
  • Quick View
    (0)
    Drone Components

    GPS Module with Compass

    NPR 3,000.00
  • -14%
    Quick View
    (0)
    Modules
    •    IR Infrared Obstacle Avoidance Sensor Module can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, and black and white line tracking and so on
    •          the module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted.
    •          Can be used for 3-5V DC power supply modules.

    IR Infrared Obstacle Avoidance Sensor Module

    NPR 300.00
  • -9%
    Quick View
    (0)
    Modules

    Lots of robotic projects need a joystick. This module offers an affordable solution
    to that. The Joystick module is similar to analog joysticks found in gamepads. It is made
    by mounting two potentiometers at a 90 degrees angle. The potentiometers are
    connected to a short stick centered by springs.

    Joystick Module

    NPR 400.00
  • Quick View
    (0)
    Modules

    Features:

    •          This module uses a professional microphone amplifier IC.
    •          Low noise
    •          Small size
    •          High sensitivity
    •          Fixed gain in 20db
    •          Voltage: 3-5V
    •          OUT output: default output analog signal.

    MAX9812 Microphone Amplifier Module

    NPR 450.00
  • Quick View
    (0)
    Modules

    This is a DIY metal detector kit parts. You need solder it by yourself. 

    Metal Detector Module

    NPR 600.00
  • Quick View
    (0)
    Modules

    Micro USB 5V 1A 18650 TP4056 Lithium Battery Charger Module Charging Board With Protection Dual Functions 1A Li-io

    Micro USB 5V 1A Lithium Battery Charger Module (Charging Board With Protection Dual Function)

    NPR 250.00
  • Quick View
    (0)
    Modules

    This MP3 module is a small and low cost MP3 module with an amplifier output directly to the speaker.

     The module can be used as a stand alone module with attached battery, speaker and push buttons or used in combination with an Arduino UNO or any other with RX/TX capabilities.

    MP3 WAV Player Module (Micro SD)

    NPR 420.00
  • Quick View
    (0)
    Modules

    Nrf24l01L wireless module, uses NRF24l01 IC, works at 2.4Ghz worldwild open ISM band, working data speed up to 2 Mbps, 125 channel can reach multiple channel and jumping channel needs, operation voltage 3.3-3.6V, transmit power up to 20 dBm, then sensitivity can reach -86dbm at 2 Mps high speed.

    NRF24L01 Long Range Wireless Module R2 (1.1KM)

    NPR 650.00
  • Quick View
    (0)
    Relay

    This single relay module can be used to control lighting, electrical and other 220V equipment from an Arduino digital output.

    One Channel Relay Module (5V)

    NPR 250.00