arduino

Default sorting
Show
16
  • Quick View
    (0)
    Arduino

    MKR WAN 1300 is a powerful board that combines the functionality of the MKR Zero and LoRa / LoRaWANTM connectivity. It is the ideal solution for makers wanting to design IoT projects with minimal previous experience in networking having a low power device.

    Arduino MKR WAN 1300 (LoRa® connectivity)

    NPR 17,125.00
  • Quick View
    (0)
    Arduino

    Arduino MKR1000 is a powerful board that combines the functionality of the Zero and the Wi-Fi Shield. It is the ideal solution for makers wanting to design IoT projects with minimal previous experience in networking.

    Arduino MKR1000

    NPR 14,035.00
  • Quick View
    (0)
    Arduino

    Arduino’s tiniest form factor with Bluetooth® and Bluetooth® Low Energy and embedded inertial sensor.

    Arduino Nano 33 BLE

    NPR 7,705.00
  • Quick View
    (0)
    Arduino

    An IoT connected IMU sensor in the Nano form factor.

    Arduino Nano 33 IoT wo headers

    NPR 7,015.00
  • -8%
    Quick View
    (0)
    Arduino

    Inspired From Arduino Starter Kit Multi-language.(Arduino.cc)
    Quickly and easily get started with learning electronics using the Arduino Starter Kit. No prior experience is required, as the kits introduce both coding and electronics through fun, engaging, and hands-on projects. 

    Arduino Starter Kit

    NPR 5,500.00
  • Quick View
    (0)
    Arduino

    The Nano Every is Arduino’s 5V compatible board in the smallest available form factor: 45x18mm!

    Arduino Nano Every

    NPR 4,920.00
  • -20%
    Quick View
    (0)
    Arduino

    The Arduino MEGA ADK is a microcontroller board based on the ATmega2560 (datasheet). It has a USB host interface to connect with Android based phones, based on the MAX3421e IC.

    Arduino Mega ADK

    NPR 4,755.00
  • Quick View
    (0)
    Arduino

    The Arduino Ethernet Shield connects your Arduino to the internet in mere minutes. Just plug this module onto your Arduino board, connect it to your network with an RJ45 cable (not included) and follow a few simple instructions to start controlling your world through the internet. As always with Arduino, every element of the platform – hardware, software and documentation – is freely available and open-source. This means you can learn exactly how it’s made and use its design as the starting point for your own circuits. Hundreds of thousands of Arduino boards are already fueling people’s creativity all over the world, everyday. Join us now, Arduino is you!

    Requires an Arduino board (not included)
    Operating voltage 5V (supplied from the Arduino Board)
    Ethernet Controller: W5100 with internal 16K buffer
    Connection speed: 10/100Mb
    Connection with Arduino on SPI port

    Arduino ethernet Shield

    NPR 4,400.00
  • Quick View
    (0)
    Arduino

    The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller.

    It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.

    Warning: Unlike most Arduino boards, the Arduino Due board runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board.

    Arduino Due

    NPR 3,899.00
  • Quick View
    (0)
    Arduino
    Microcontroller
    ATmega32u4
    Operating Voltage
    5V
    Input Voltage (recommended)
    7-12V
    Input Voltage (limits)
    6-20V
    Digital I/O Pins
    20
    PWM Channels
    7
    Analog Input Channels
    12
    DC Current per I/O Pin
    40 mA
    DC Current for 3.3V Pin
    50 mA
    Flash Memory
    32 KB (ATmega32u4) of which 4 KB used by bootloader
    SRAM
    2.5 KB (ATmega32u4)
    EEPROM
    1 KB (ATmega32u4)
    Clock Speed
    16 MHz
    Length
    68.6 mm
    Width
    53.3 mm
    Weight
    20g

    Arduino Leonardo

    NPR 1,950.00
  • Quick View
    (0)
    Arduino

    The Arduino Micro is essentially a shrunk-down (1.9″ × 0.7″) version of the Arduino Leonardo: it is a microcontroller board based on the ATmega32U4 running at 16 MHz with 24 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs). This board ships with the male header pins soldered in.

    Arduino Micro Pro R3

    NPR 1,900.00
  • Quick View
    (0)
    Arduino

    • Prototyping area for soldering connectors, circuitry or sensors.

    • Onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run

    • Works with Arduino UNO, Duemilanove, Diecimila, Leonardo or ADK/Mega R3 or higher. ADK/Mega R2 or lower are not supported.

    • SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card

    • Real time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years

    Arduino Data Logger Shield (Micro SD Slot + RTC)

    NPR 1,699.00
  • Quick View
    (0)
    Arduino

    It is the Chinese clone of the Arduino Mega 2560 and is capable of doing all the functions.

    The MEGA 2560 is designed for more complex projects. With 54 digital I/O pins, 16 analog inputs and a larger space for your sketch it is the recommended board for 3D printers and robotics projects. This gives your projects plenty of room and opportunities.The MEGA 2560 is designed for more complex projects. With 54 digital I/O pins, 16 analog inputs and a larger space for your sketch it is the recommended board for 3D printers and robotics projects. This gives your projects plenty of room and opportunities.

    Arduino Mega 2560 (Chinese)

    NPR 1,550.00
  • Quick View
    (0)
    Arduino

    This prototyping shield is the best out there (well, we think so, at least), and now is even better with Version R3 – updated for the most compatibility with just about all the Arduinos! It works with UNO, Mega, Leonardo, NG, Diecimila, Duemilanove, and compatible Arduinos. Yun’s and Arduino Ethernets have a chunky Ethernet jack that gets in the way of stacking, you can use the stacking headers included and it will work, just doesn’t sit nice and flat.

    Proto Shield for Arduino kit (Adafruit)

    NPR 1,500.00
  • Quick View
    (0)
    Modules

    This is essentially a ramped up version of our Ardumoto motor driver shield. For this monster shield we’ve replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We’ve also beefed up the support circuitry so this board is capable of driving a pair of high-current motors!

    Monster Motor Sheild (for Arduino) VNH2SP30 30A

    NPR 1,399.00
  • Quick View
    (0)
    Modules

    A solenoid valve is an electromechanically operated valve. The valve is controlled by an electric current through a solenoid: in the case of a two-port valve the flow is switched on or off; in the case of a three-port valve, the outflow is switched between the two outlet ports. Solenoid valves are the most frequently used control elements in fluidics. Their tasks are to shut off, release, dose, distribute or mix fluids. They are found in many application areas. Solenoids offer fast and safe switching, high reliability, long service life, good medium compatibility of the materials used, low control power and compact design.

    Solenoid Valve (0.5″ 12V)

    NPR 1,350.00