-
-
-
- SanDisk Ultra microSDHC UHS-1 (Micro SD Card)
- 16 GB Menory
- 98MBps transfer speed
- UHS 1
Can be used for Raspberry pi and other purpose.
SanDisk Ultra micro SD Card 16 GB (For Raspberry Pi)
NPR 550.00 -
-
Wireless speed up to 150Mbps, ideal for internet surfing and on-line gaming
-
Complies with IEEE 802.11n (Draft 2.0), IEEE 802.11g, IEEE 802.11b standards.
-
Supports 64/128-bit WEP, as well as WPA/WPA2 and WPA-PSK/WPA2-PSK encryptions
-
Supports WIN XP, VISTA, WIN7/8/10 operating system
-
Wireless Standards: IEEE 802.b/g/n
-
Frequency range: 2.4GHz
Wireless WiFi Receiver/Adapter with wifi Antenna
NPR 799.00 -
-
The Raspberry Pi Zero Case is a perfect fit for Raspberry Pi Zero, Raspberry Pi Zero W, and Raspberry Pi Zero 2 W.
Raspberry pi Zero Case
NPR 800.00 -
This is a T-type breakout kit used for extending the GPIO interface on Raspberry Pi to the breadboard. It helps you to make the connections between Raspberry Pi and breadboard become simple.
The kit comes with a 26 pin ribbon cable and an adapter board. Compatible with both Raspberry Pi revision A and revision B.
Raspberry Pi GPIO Extension Board v3.0 + cable
NPR 800.00 -
Special ‘easy to use’ casing for Raspberry Pi 2 and also Pi 3 Model B which is the second generation Raspberry Pi.
Original Case for Raspberry Pi 3
NPR 800.00 -
Features:
- Durable product
- Made from good material
- Good product to use
T-Cobbler Plus v2.2 Cable T-GPIO Expansion Board for Raspberry Pi
NPR 800.00 -
The Raspberry Pi B+ / Pi 2 / Pi 3 / Pi 4 has landed on the Maker World as a 40-GPIO pinned, quad-USB ported, credit card-sized bomb of DIY joy. it’s probably a good time to upgrade your setup and accessorize using all of the Model B+’s / Pi 2’s / Pi 3 / Pi 4’s 40 pins.
That’s why we now carry the Adafruit Assembled Pi Cobbler Plus – Breakout and Cable for Raspberry Pi A+, B+, Pi 2, Pi 3, and Pi 4. It’s an add-on prototyping Pi Cobbler from Adafruit specifically designed for the B+ and Pi 2 that you can break out all those tasty power, GPIO, I2C, and SPI pins from the 40-pin header onto a solderless breadboard. This will make “cobbling together” prototypes with the Pi super easy.
Designed for use with Raspberry Pi Model A+/B+/Pi 2/Pi 3/Pi 4 only! No soldering is required!
Pi Cobbler B+ (Adafruit)
NPR 900.00 -
A USB-C based power adapter for Raspbeery Pi 4 Model B.Specification:- 5.1V / 3.0A DC output
- 96-264Vac operating input range
- Short circuit, overcurrent and over temperature protection
- 1.5m 18 AWG captive cable with USB-C output connector
Raspberry Pi 4 Power Adapter
NPR 1,000.00 -
Raspberry Pi Pico is a tiny, fast, and versatile board built using RP2040, a brand new microcontroller chip designed by Raspberry Pi in the UK.
Raspberry Pi Pico
NPR 1,250.00 -
This 5mp camera module is capable of 1080p video and still images and connects directly to your Raspberry Pi. Connect the included ribbon cable to the CSI (Camera Serial Interface) port on your Raspberry Pi, boot up the latest version of Raspbian
The board itself is tiny, at around 25mm x 20mm x 9mm and weighing in at just over 3g, making it perfect for mobile or other applications where size and weight are important. The sensor has a native resolution of 5 megapixels, and has a fixed focus lens onboard. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video.
Note: This module is only capable of taking pictures and video, not sound.
Raspberry Pi Cam 5 MP (Camera)
NPR 1,500.00 -
BreadFruit Electronics | | Buy latest Arduino, Sensors, Raspberry Pi, ICs, Resistors and other electronic components in Nepal
2
Shopping Cart(2)
-
Heat Sink-15*15*15mm
Qty: 1NPR 200.00 -
Glass Fuse 8A
Qty: 1NPR 25.00
Total:
NPR 225.00
2
Shopping Cart(2)
-
Heat Sink-15*15*15mm
Qty: 1NPR 200.00
-
Glass Fuse 8A
Qty: 1NPR 25.00
Total:
NPR 225.00
2
Shopping Cart(2)
-
Heat Sink-15*15*15mm
Qty: 1NPR 200.00
-
Glass Fuse 8A
Qty: 1NPR 25.00
Total:
NPR 225.00
