-
14 pin ic base
NPR 15.0014 pin ic base
Number of Pins: 14
Row-to-Row Spacing: 0.300″ (7.62mm)
Pin Spacing: 0.1″ (2.54mm)
Contact Finish: Tin
Contact Mounth: Thru Hole PCB
Profile: Standard
Mount Style: Vertical
Type: Closed
Leg Style: Straight -
16 Pin IC Base
NPR 25.0016 Pin IC Socket base adaptor is a 16 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when required. The IC is placed on the socket at the time of use. This base acts as a removable IC holder.
-
-
-
20 pin Male IDC
NPR 50.00An insulation-displacement contact (IDC), also known as insulation-piercing contact (IPC), is an electrical connector designed to be connected to the conductor(s) of an insulated cable by a connection process which forces a selectively sharpened blade or blades through the insulation, bypassing the need to strip the conductors of insulation before connecting. When properly made, the connector blade cold-welds to the conductor, making a theoretically reliable gas-tight connection.”
-
-
-
40-Pin IC base
NPR 45.00This ia a 40-pin IC base with pins spaced at 0.1(2.54mm) . It is usable for plugging in and out the IC during prototyping and to protect the IC from damage due to heat while soldering by first soldering the base to the board and plugging the IC later.
-
4017 decade counter
NPR 50.00The CD4017 is a CMOS Decade counter IC. CD4017 is used for low range counting applications. It can count from 0 to 10 (the decade count). The circuit designed by using this ic will save board space and also time required to design the circuit. CD4017 is as ‘Johnson 10 stage decade counter’.
-
-
64 Pin DIP IC Socket Base Adaptor
NPR 50.0064 Pin DIP IC Socket Base Adaptor.
QUICK OVERVIEW 64 pins. JDEC compliant. Molded notch for proper orientation. Easy to insert and remove ICs. Features: 64 pins. JDEC compliant. Molded notch for proper orientation. Easy to insert and remove ICs. Package Included: 1 x 64 Pin DIP IC Socket Base Adaptor(5 pcs). -
78L15 voltage regulator IC (TO-92)
NPR 25.00The LM78LXX series of three terminal positive regulators is available with several fixed output voltages making them useful in a wide range of applications. When used as a zener diode/resistor combination replacement, the LM78LXX usually results in an effective output impedance improvement of two orders of magnitude, and lower quiescent current. These regulators can provide local on card regulation, eliminating the distribution problems associated with single point regulation. The voltages available allow the LM78LXX to be used in logic systems, instrumentation, HiFi, and other solid state electronic equipment.
The 78L15 IC gives an output voltage of 15V. It is available in the plastic TO-92 (Z) package
-
-
AT mega 328
NPR 350.00The ATmega328 is a single-chip microcontroller created by Atmel in the megaAVR family (later Microchip Technology acquired Atmel in 2016). It has a modified Harvard architecture 8-bit RISC processor core.
-
-
-
DIP-18 LM3914N
NPR 75.00The LM3914 is a monolithic integrated circuit that senses analog voltage levels and drives 10 LEDs, providing a linear analog display. A single pin changes the display from a moving dot to a bar
graph. Current drive to the LEDs is regulated and programmable, eliminating the need for resistors. This feature is one that allows operation of the whole system from less than 3V. -
-
EL 4N35 712 Octocoupler
NPR 50.00The 4N35 is an optocoupler for general purpose applications.It contains a light emitting diode optically coupled to a photo-transistor
-
L 7805CV Voltage Regulator IC
NPR 40.00The 7805 Voltage Regulator IC is a commonly used voltage regulator that finds its application in most of the electronics projects. It provides a constant +5V output voltage for a variable input voltage supply
-
-
-
-
L293D H-Bridge Motor Driver
NPR 120.00L293D is a dual H-bridge motor driver integrated circuit (IC). Motor drivers act as current amplifiers since they take a low-current control signal and provide a higher-current signal. This higher current signal is used to drive the motors.
-
-
-
LM317T CCVO3 Voltage Regulator IC
NPR 40.00The LM317 is an adjustable 3−terminal positive voltage regulator
capable of supplying in excess of 1.5 A over an output voltage range of
1.2 V to 37 V. This voltage regulator is exceptionally easy to use and
requires only two external resistors to set the output voltage. Further, it
employs internal current limiting, thermal shutdown and safe area
compensation, making it essentially blow−out proof -
LM337T P+ Voltage Regulator IC
NPR 40.00The LM337 is adjustable 3-terminal negative-voltage regulator capable of supplying in excess of –1.5 A over an output voltage range of –1.2 V to –37 V. It requires only two external resistors to set the output voltage and one output capacitor for frequency compensation.
-
LM386N HYC 3123H (Audio Amplifier) IC
NPR 40.00The LM386 is a power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count low, but the addition of an external resistor and capacitor between pins 1 and 8 will increase the gain to any value from 20 to 200.
-
Max232 EPE
NPR 70.00The MAX232 device is a dual driver/receiver that includes a capacitive voltage generator to supply TIA/EIA-232-F voltage levels from a single 5-V supply. Each receiver converts TIA/EIA-232-F inputs to 5-V TTL/CMOS levels. These receivers have a typical threshold of 1.3 V, a typical hysteresis of 0.5 V, and can accept ±30-V inputs. Each driver converts TTL/CMOS input levels into TIA/EIA-232-F levels.
-
Maxim MAX7219 CNG
NPR 130.00The MAX7219are compact, serial input/output common-cathode display drivers that interface microprocessors (µPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs. Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8×8 static RAM that stores each digit.
-
BreadFruit Electronics | | Buy latest Arduino, Sensors, Raspberry Pi, ICs, Resistors and other electronic components in Nepal
