• (0)

    Proto Shield for Arduino kit (Adafruit)

    NPR 1,500.00

    This prototyping shield is the best out there (well, we think so, at least), and now is even better with Version R3 – updated for the most compatibility with just about all the Arduinos! It works with UNO, Mega, Leonardo, NG, Diecimila, Duemilanove, and compatible Arduinos. Yun’s and Arduino Ethernets have a chunky Ethernet jack that gets in the way of stacking, you can use the stacking headers included and it will work, just doesn’t sit nice and flat.

  • (0)

    Arduino Nano with cable

    NPR 1,535.00

    The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) orATmega168 (Arduino Nano 2.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. The Nano was designed and is being produced by Gravitech.

    • • Automatic reset during program download
    • • Power OK blue LED
    • • Green (TX), red (RX) and orange (L) LED
    • • Auto sensing/switching power input
    • • Small mini-B USB for programming and serial monitor
    • • ICSP header for direct program download
    • • Standard 0.1” spacing DIP (breadboard friendly)
    • • Manual reset switch
  • (0)

    Arduino Mega 2560 (Chinese)

    NPR 1,550.00

    It is the Chinese clone of the Arduino Mega 2560 and is capable of doing all the functions.

    The MEGA 2560 is designed for more complex projects. With 54 digital I/O pins, 16 analog inputs and a larger space for your sketch it is the recommended board for 3D printers and robotics projects. This gives your projects plenty of room and opportunities.The MEGA 2560 is designed for more complex projects. With 54 digital I/O pins, 16 analog inputs and a larger space for your sketch it is the recommended board for 3D printers and robotics projects. This gives your projects plenty of room and opportunities.

  • (2)

    Arduino UNO R3 Mega328p CH340 Development Board

    NPR 1,690.00

    The Uno R3 CH340G ATmega328p Development Board is the low-cost version of the popular Uno R3 Arduino. It is assembled with the CH340 USB to Serial converter chip, instead of using an Atmega16U2 chip.

  • (0)

    Arduino Data Logger Shield (Micro SD Slot + RTC)

    NPR 1,699.00
    • Prototyping area for soldering connectors, circuitry or sensors.

    • Onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run

    • Works with Arduino UNO, Duemilanove, Diecimila, Leonardo or ADK/Mega R3 or higher. ADK/Mega R2 or lower are not supported.

    • SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card

    • Real time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years

  • (0)

    Arduino Micro Pro R3

    NPR 1,900.00

    The Arduino Micro is essentially a shrunk-down (1.9″ × 0.7″) version of the Arduino Leonardo: it is a microcontroller board based on the ATmega32U4 running at 16 MHz with 24 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs). This board ships with the male header pins soldered in.

  • (0)

    Arduino Leonardo

    NPR 1,950.00
    Microcontroller
    ATmega32u4
    Operating Voltage
    5V
    Input Voltage (recommended)
    7-12V
    Input Voltage (limits)
    6-20V
    Digital I/O Pins
    20
    PWM Channels
    7
    Analog Input Channels
    12
    DC Current per I/O Pin
    40 mA
    DC Current for 3.3V Pin
    50 mA
    Flash Memory
    32 KB (ATmega32u4) of which 4 KB used by bootloader
    SRAM
    2.5 KB (ATmega32u4)
    EEPROM
    1 KB (ATmega32u4)
    Clock Speed
    16 MHz
    Length
    68.6 mm
    Width
    53.3 mm
    Weight
    20g
  • (0)

    Genuine Arduino UNO R3 (Italy) with 1 Year Warranty

    NPR 2,690.00

    The Arduino open-sourced IDE drivers can be downloaded for free and we have created a download and installation tutorial for the Windows XP platform.

    Features of the Arduino UNO:

    • Microcontroller: ATmega328
    • Operating Voltage: 5V
    • Input Voltage (recommended): 7-12V
    • Input Voltage (limits): 6-20V
    • Digital I/O Pins: 14 (of which 6 provide PWM output)
    • Analog Input Pins: 6
    • DC Current per I/O Pin: 40 mA
    • DC Current for 3.3V Pin: 50 mA
    • Flash Memory: 32 KB of which 0.5 KB used by bootloader
    • SRAM: 2 KB (ATmega328)
    • EEPROM: 1 KB (ATmega328)
    • Clock Speed: 16 MHz
  • (0)

    Arduino Due

    NPR 3,899.00

    The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller.

    It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.

    Warning: Unlike most Arduino boards, the Arduino Due board runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board.

  • (0)

    Arduino ethernet Shield

    NPR 4,400.00

    The Arduino Ethernet Shield connects your Arduino to the internet in mere minutes. Just plug this module onto your Arduino board, connect it to your network with an RJ45 cable (not included) and follow a few simple instructions to start controlling your world through the internet. As always with Arduino, every element of the platform – hardware, software and documentation – is freely available and open-source. This means you can learn exactly how it’s made and use its design as the starting point for your own circuits. Hundreds of thousands of Arduino boards are already fueling people’s creativity all over the world, everyday. Join us now, Arduino is you!

    Requires an Arduino board (not included)
    Operating voltage 5V (supplied from the Arduino Board)
    Ethernet Controller: W5100 with internal 16K buffer
    Connection speed: 10/100Mb
    Connection with Arduino on SPI port

  • (0)

    Arduino Mega ADK

    NPR 4,755.00

    The Arduino MEGA ADK is a microcontroller board based on the ATmega2560 (datasheet). It has a USB host interface to connect with Android based phones, based on the MAX3421e IC.

  • (0)

    Arduino Nano Every

    NPR 4,920.00

    The Nano Every is Arduino’s 5V compatible board in the smallest available form factor: 45x18mm!

  • (0)

    Arduino Pro Mini Kit

    NPR 5,000.00

    The Arduino Pro Mini is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers.

  • (0)

    Genuine Arduino Mega 2560 R3(Italy)

    NPR 5,400.00

    The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins , 16 analog inputs, 4 UARTs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller.

  • (0)

    Arduino Starter Kit

    NPR 5,500.00

    Inspired From Arduino Starter Kit Multi-language.(Arduino.cc)
    Quickly and easily get started with learning electronics using the Arduino Starter Kit. No prior experience is required, as the kits introduce both coding and electronics through fun, engaging, and hands-on projects. 

  • (0)

    Arduino Nano 33 IoT wo headers

    NPR 7,015.00

    An IoT connected IMU sensor in the Nano form factor.