• Quick View
    (0)

    Arduino Sensor Shield is a board used to connect sensors, servos, LCD with the Arduino Board without the requirement of soldering. Using Arduino Board separately you’ll find a few of 5V and GND connections. Arduino Sensor Shield gives you the ability of dedicated one 5V and GND connection for every Arduino signal pin.

    Arduino Sensor Shield

    NPR 500.00
  • Quick View
    (0)

    Photo resistors, also known as light dependent resistors (LDR), are light sensitive devices most often used to indicate the presence or absence of light, or to measure the light intensity.

    LDR Sensor

    NPR 25.00
  • -19%
    Quick View
    (0)

    Take your sonar outside – great for all weather robots! The XL-MaxSonar-WRMA1 ignores smaller targets and only reports the range to target with the largest acoustic return. This is our most advanced weather resistant sensor designed for target detection and ranging outdoors or in tank or bin applications.

    Waterproof ultrasonic sensor

    NPR 890.00
  • Quick View
    (0)

    TMP36 is a wide range, low power temperature sensor that outputs an analog voltage that is proportional to the ambient temperature.

    TMP36 Temperature Sensor

    NPR 250.00
  • Quick View
    (0)

    The emitter is an IR LED and the detector is an IR photodiode. The IR phototdiode is sensitive to the IR light emitted by an IR LED. The photo-diode’s resistance and output voltage change in proportion to the IR light received. This is the underlying working principle of the IR sensor.

    IR Sensor(Photodiode)

    NPR 19.00
  • Quick View
    (0)
    • Technical parameters
    • power 5V DC
    •  maximum working current < 10mA
    • operating frequency ID 125KHz 、IC 13.56MHZ
    •  supports
    • ID:EM4100 and its compatible cards

     

    • IC:Reader Out format
    • MF1 Classic S50,S70,FM1108,MF Plus 4bit, NTAG213,NTAG215,NTAG216,

     

    •  support management card configuration
    • card sensing speed is less than 200ms
    • operating temperature 60 C 0
    • 10% ~ 95% (no humidity dew)
    • Operating environment
    • WinXP, Win7, Win8, Android-OTG, etc., in theory, as long as the USB keyboard to support the computer or mobile phones can use this product.
    • Using method
    • the use of the configuration card configuration card, the card is 3 seconds. The configuration of red, blue flash alternately exhibit of lanterns.

    Portable USB RFID Sensor 125 KHz

    NPR 3,000.00
  • Quick View
    (0)

    The TCS3200 programmable color light-to-frequency converter combines configurable silicon photodiodes and a current-to-frequency converter on a single monolithic CMOS integrated circuit. The output is a square wave (50% duty cycle) with frequency directly proportional to light intensity (irradiance).  The TCS3200 reads an 8×8 array of photodiodes.

    TCS 3200 (Color Sensor)

    NPR 680.00
  • Quick View
    (0)

    Water Level Sensor is easy-to-use, cost effective high level/drop recognition sensor, which is obtained by having a series of parallel wires exposed traces measured droplets/water volume in order to determine the water level.

    Water Sensor

    NPR 449.00
  • -22%
    Quick View
    (0)

    Model:   SCT-013-000

    Rated input current:0-100A.

    Output: 0-50mA or 0-1V.

    Split Core Current Sensor Transformer SCT013

    NPR 1,560.00
  • Quick View
    (0)

    Widely used in motor speed detection, pulse-counting, any position, possesses 2 road testing.

    Two Way Velocimetry Sensor Module XD 211

    NPR 550.00
  • Quick View
    (0)

    Accurate sensor to measure AC/DC current up to 20A. The sensor can even measure high AC mains current and is still isolated from the measuring part due to integrated hall sensor. The board operates on 5V. ACS712 current sensor operates from 5V and outputs analog voltage proportional to current measured on the sensing terminals. You can simple use a microcontroller ADC to read the values.

    20A Hall Current Sensor ACS712-20A

    NPR 480.00
  • Quick View
    (0)

    This is a simple water sensor can be used to detect soil moisture when the soil moisture deficit module outputs a high level, and vice versa output low. Use this sensor produced an automatic plant waterer device, so that the plants in your garden without people to manage.

    Soil Hygrometer Detection Sensor Module

    NPR 450.00
  • Quick View
    (0)

    HX711 is an electronic scale module, whose working principle is to convert the measured changes in resistance value changes, through the conversion circuit into electrical output. The module communicates with the host computer through TTL 232.

    HX711 Dual-Channel Weighing Sensor Module

    NPR 400.00
  • Quick View
    (0)
    • Product Model: FSR402:
    • Size: thick (12.5 mm) in diameter, 1/2 “for the active field

    FSR is Force Sensitive Resistor, allowing you to detect the physical pressure, extrusion, and weight.They are simple using, low cost.

    FSR is delimited by two layer, as the pressure increases, the activity of these elements point will touch the semiconductor, making resistance smaller

    Force Sensitive Resistor Sensor (FSR402)

    NPR 1,950.00
  • Quick View
    (0)

    Gas Sensor(MQ5) module is useful for gas leakage detection (in home and industry). It is suitable for detecting H2, LPG, CH4, CO, Alcohol. Due to its high sensitivity and fast response time, measurements can be taken as soon as possible. The sensitivity of the sensor can be adjusted by using the potentiometer.

    Gas Sensor(MQ5)

    NPR 500.00
  • Quick View
    (0)

     Gas Sensor(MQ9) module is useful for gas leakage detection (in home and industry). It is suitable for detecting LPG, CO, CH4. Due to its high sensitivity and fast response time, measurements can be taken as soon as possible. The sensitivity of the sensor can be adjusted by using the potentiometer.

    Gas Sensor (MQ9)

    NPR 550.00