• Quick View
    (0)

    This capacitive touch sensor module uses the TTP229 integrated circuit, making it easy to add capacitive touch input for projects. It features 16 sensitive touch pads that make an ideal replacement for the traditional keypads.

    16 Channel Digital Capacitive Switch Touch Sensor Module

    NPR 350.00
  • Quick View
    (0)

    Accurate sensor to measure AC/DC current up to 20A. The sensor can even measure high AC mains current and is still isolated from the measuring part due to integrated hall sensor. The board operates on 5V. ACS712 current sensor operates from 5V and outputs analog voltage proportional to current measured on the sensing terminals. You can simple use a microcontroller ADC to read the values.

    20A Hall Current Sensor ACS712-20A

    NPR 480.00
  • Quick View
  • Quick View
    (0)

    Arduino Sensor Shield is a board used to connect sensors, servos, LCD with the Arduino Board without the requirement of soldering. Using Arduino Board separately you’ll find a few of 5V and GND connections. Arduino Sensor Shield gives you the ability of dedicated one 5V and GND connection for every Arduino signal pin.

    Arduino Sensor Shield

    NPR 500.00
  • Quick View
  • -22%
    Quick View
    (0)

    Barometric Pressure sensor measures the absolute pressure of the air around it. This pressure varies with both the air and altitude. Depending upon the interpretation of the data, changes in the weather can be monitored, altitude can be measured, and any task can be done that requires the accurate pressure measurement.

    BMP 180 (Pressure Sensor)

    NPR 350.00
  • Quick View
    (0)
    This is Carbon Monoxide sensor is suitable for sensing CO concentrations in the air. The MQ-7 can detect CO-gas concentrations anywhere from 20 to 2000ppm.This sensor has a high sensitivity and fast response time. The sensor’s output is an analog resistance. The drive circuit is very simple; all you need to do is power the heater coil with 5V, add a load resistance, and connect the output to an ADC.

    Carbon Monoxide Sensor (MQ7 | MQ-7)

    NPR 550.00
  • Quick View
    (0)

    This module is based on the I2C light-to-digital converter TSL2561 to transform light intensity to a digital signal. Different from the traditional analog light sensor, this digital module features a selectable light spectrum range due to its dual light-sensitive diodes: infrared and full spectrum.

    You can switch among three detection modes to take your readings. They are infrared mode, full spectrum, and human visible mode. When running under the human visible mode, this sensor will give you readings just close to your eye feelings.

    Digital Light Sensor Module (TSL2561)

    NPR 800.00
  • Quick View
    (0)

    GP2Y1010AU0F is a dust sensor by optical sensing
    system.
    An infrared emitting diode (IRED) and an phototransistor are diagonally arranged into this device.
    It detects the reflected light of dust in air.
    Especially, it is effective to detect very fine particle
    like the cigarette smoke.
    In addition it can distinguish smoke from house dust
    by pulse pattern of output voltage.

    GP2Y1010AU0F is a dust sensor by optical sensing system
    An infrared emitting diode (IRED) and an phototransistor are diagonally arranged into this device
    It detects the reflected light of dust in air.
    Especially, it is effective to detect very fine particle like the cigarette smoke
    In addition it can distinguish smoke from house dust by pulse pattern of output voltage
    Compact, thin package (46.0 × 30.0 × 17.6 mm)
    Low consumption current (Icc: MAX. 20 mA)
    The presence of dust can be detected by the photometry of only one pulse
    Enable to distinguish smoke from house dust
    Lead-free and RoHS directive compliant
    Compliant with RoHS directive (2002/95/EC)

    Dust sensor Smoke Particle Sensor With Cable GP2Y1010AU0F

    NPR 1,790.00
  • Quick View
    (0)
    • Product Model: FSR402:
    • Size: thick (12.5 mm) in diameter, 1/2 “for the active field

    FSR is Force Sensitive Resistor, allowing you to detect the physical pressure, extrusion, and weight.They are simple using, low cost.

    FSR is delimited by two layer, as the pressure increases, the activity of these elements point will touch the semiconductor, making resistance smaller

    Force Sensitive Resistor Sensor (FSR402)

    NPR 1,950.00
  • Quick View
    (0)
    • This is 3.3V/5V FPM10A Fingerprint Reader Sensor Module
    • Optical Fingerprint Reader Sensor Module For Arduino Locks Serial Communication Interface

    FPM10A Fingerprint Reader Sensor Module (3.3V/5V)

    NPR 1,800.00
  • Quick View
    (0)
    This gas sensor for monitoring indoor air qualit. it is suitable for sensing NH3, NOx, alcohol, Benzene, smoke and CO2 in the air. The MQ-135 can detect NH3 and Alcohol gas concentrations anywhere from 10-300ppm and Benzene from 10-1000ppm. This sensor has a high sensitivity and fast response time. The sensitivity of the sensor can be adjusted by potentiometer.

    Gas Sensor (MQ135)

    NPR 550.00
  • Quick View
    (0)

     Gas Sensor(MQ9) module is useful for gas leakage detection (in home and industry). It is suitable for detecting LPG, CO, CH4. Due to its high sensitivity and fast response time, measurements can be taken as soon as possible. The sensitivity of the sensor can be adjusted by using the potentiometer.

    Gas Sensor (MQ9)

    NPR 550.00
  • Quick View
    (0)

    Gas Sensor(MQ5) module is useful for gas leakage detection (in home and industry). It is suitable for detecting H2, LPG, CH4, CO, Alcohol. Due to its high sensitivity and fast response time, measurements can be taken as soon as possible. The sensitivity of the sensor can be adjusted by using the potentiometer.

    Gas Sensor(MQ5)

    NPR 500.00
  • Quick View
    (0)

    The GY-271 HMC5883L 3-axis Electronic Compass Module Magnetic Field Sensor is designed for low field magnetic sensing with a digital interface and it is perfect to give precise heading information. This compact sensor fits into small projects such as UAVs and robot navigation systems.

    HMC5883L Triple Axis Compass Magnetometer Sensor Gy271

    NPR 900.00
  • Quick View
    (0)

    HX711 is an electronic scale module, whose working principle is to convert the measured changes in resistance value changes, through the conversion circuit into electrical output. The module communicates with the host computer through TTL 232.

    HX711 Dual-Channel Weighing Sensor Module

    NPR 400.00
  • Quick View
    (0)
    This hydrogen gas sensor is suitable for sensing hydrogen concentrations in the air. It can detect hydrogen gas concentrations anywhere from 100-10000ppm. This sensor has a high sensitivity and fast response time. The sensor’s output is an analog resistance. The drive circuit is very simple; all you need to do is power the heater coil with 5V, add a load resistance, and connect the output to an ADC.

    Hydrogen Gas Sensor (MQ8)

    NPR 550.00
  • Quick View
    (0)

    A pair of infrared sensor and a 21 keyed remote control.

    Infrared Sensor + Remote Control

    NPR 500.00
  • -14%
    Quick View
    (0)
    •    IR Infrared Obstacle Avoidance Sensor Module can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, and black and white line tracking and so on
    •          the module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted.
    •          Can be used for 3-5V DC power supply modules.

    IR Infrared Obstacle Avoidance Sensor Module

    NPR 300.00
  • Quick View
    (0)

    The emitter is an IR LED and the detector is an IR photodiode. The IR phototdiode is sensitive to the IR light emitted by an IR LED. The photo-diode’s resistance and output voltage change in proportion to the IR light received. This is the underlying working principle of the IR sensor.

    IR Sensor(Photodiode)

    NPR 19.00
  • Quick View
    (0)

    Photo resistors, also known as light dependent resistors (LDR), are light sensitive devices most often used to indicate the presence or absence of light, or to measure the light intensity.

    LDR Sensor

    NPR 25.00
  • Quick View
    (0)

    This Liquefied Petroleum Gas (LPG) sensor is suitable for sensing LPG (composed of mostly propane and butane) concentrations in the air. It can detect gas concentrations anywhere from 200 to 10000ppm. This sensor has a high sensitivity and fast response time. The sensor’s output is an analog resistance. The drive circuit is very simple; all you need to do is power the heater coil with 5V, add a load resistance, and connect the output to an ADC.

    LPG Gas Sensor (MQ6)

    NPR 550.00
  • Quick View
    (0)
    • Technical parameters
    • power 5V DC
    •  maximum working current < 10mA
    • operating frequency ID 125KHz 、IC 13.56MHZ
    •  supports
    • ID:EM4100 and its compatible cards

     

    • IC:Reader Out format
    • MF1 Classic S50,S70,FM1108,MF Plus 4bit, NTAG213,NTAG215,NTAG216,

     

    •  support management card configuration
    • card sensing speed is less than 200ms
    • operating temperature 60 C 0
    • 10% ~ 95% (no humidity dew)
    • Operating environment
    • WinXP, Win7, Win8, Android-OTG, etc., in theory, as long as the USB keyboard to support the computer or mobile phones can use this product.
    • Using method
    • the use of the configuration card configuration card, the card is 3 seconds. The configuration of red, blue flash alternately exhibit of lanterns.

    Portable USB RFID Sensor 125 KHz

    NPR 3,000.00
  • Quick View
    (0)

    The rain sensor module is an easy tool for rain detection. It can be used as a
    switch when raindrop falls through the raining board and also for measuring rainfall
    intensity. The module features, a rain board and the control board that is separate for
    more convenience, power indicator LED and an adjustable sensitivity though a
    potentiometer. The analog output is used in detection of drops in the amount of rainfall.
    Connected to 5V power supply, the LED will turn on when induction board has no rain
    drop, and DO output is high. When dropping a little amount water, DO output is low, the
    switch indicator will turn on. Brush off the water droplets, and when restored to the initial
    state, outputs high level. 

    Raindrops Sensor Module MH-RD

    NPR 350.00
  • Quick View
    (0)

    An assortment of the most common sensors used in electronics.
    9 sensors and 3 additional components to interface with the “analog world.” 

    Sensor pack 900 (pre-kitted) by adafruit

    NPR 3,600.00
  • Quick View
    (0)

     Gas Sensor(MQ2) module is useful for gas leakage detection (home and industry). It is suitable for detecting H2, LPG, CH4, CO, Alcohol, Smoke or Propane. Due to its high sensitivity and fast response time, measurement can be taken as soon as possible. The sensitivity of the sensor can be adjusted by potentiometer.

    Smoke Gas Sensor (MQ2)

    NPR 550.00
  • Quick View
    (0)

    This is a simple water sensor can be used to detect soil moisture when the soil moisture deficit module outputs a high level, and vice versa output low. Use this sensor produced an automatic plant waterer device, so that the plants in your garden without people to manage.

    Soil Hygrometer Detection Sensor Module

    NPR 450.00
  • Quick View
    (0)

    Product Features

    •          Working voltage:DC 3.3-5V
    •          Dimension: Approx.4.5(L) x 1.7(H) x 0.9(W)cm
    •          Main chip: LM393, Electret condenser microphone
    •          Package Included: 1 x Sound Detection Sensor Module

    Sound Detection Sensor Module

    NPR 250.00
  • -22%
    Quick View
    (0)

    Model:   SCT-013-000

    Rated input current:0-100A.

    Output: 0-50mA or 0-1V.

    Split Core Current Sensor Transformer SCT013

    NPR 1,560.00
  • Quick View
    (0)
    The TCRT5000 are reflective sensors which include an infrared emitter and phototransistor in a leaded package which blocks visible light. The package includes two mounting clips.
    TCRT5000 sensor works with the general infrared sensor, like a sense of a TCRT5000 has an infrared emission tube and an infrared receiver tube.

    TCRT5000 Reflective Infrared Optical Sensor

    NPR 75.00
  • Quick View
    (0)

    The TCS3200 programmable color light-to-frequency converter combines configurable silicon photodiodes and a current-to-frequency converter on a single monolithic CMOS integrated circuit. The output is a square wave (50% duty cycle) with frequency directly proportional to light intensity (irradiance).  The TCS3200 reads an 8×8 array of photodiodes.

    TCS 3200 (Color Sensor)

    NPR 680.00
  • Quick View
    (0)

    This module integrates DHT11 sensor and other required components on a small PCB.  The DHT11 sensor includes a resistive-type humidity measurement component, an NTC temperature measurement component and a high-performance 8-bit microcontroller inside, and provides calibrated digital signal output.  

    Note: The cable is not included in the pack

    Temperature Humidity Sensor DHT- 11 Module

    NPR 500.00