Sensor

Default sorting
Show
16
  • Quick View
    (0)
    Sensors

    An assortment of the most common sensors used in electronics.
    9 sensors and 3 additional components to interface with the “analog world.” 

    Sensor pack 900 (pre-kitted) by adafruit

    NPR 3,600.00
  • Quick View
    (0)
    Sensors
    • Technical parameters
    • power 5V DC
    •  maximum working current < 10mA
    • operating frequency ID 125KHz 、IC 13.56MHZ
    •  supports
    • ID:EM4100 and its compatible cards

     

    • IC:Reader Out format
    • MF1 Classic S50,S70,FM1108,MF Plus 4bit, NTAG213,NTAG215,NTAG216,

     

    •  support management card configuration
    • card sensing speed is less than 200ms
    • operating temperature 60 C 0
    • 10% ~ 95% (no humidity dew)
    • Operating environment
    • WinXP, Win7, Win8, Android-OTG, etc., in theory, as long as the USB keyboard to support the computer or mobile phones can use this product.
    • Using method
    • the use of the configuration card configuration card, the card is 3 seconds. The configuration of red, blue flash alternately exhibit of lanterns.

    Portable USB RFID Sensor 125 KHz

    NPR 3,000.00
  • Quick View
    (0)
    Sensors
    • Product Model: FSR402:
    • Size: thick (12.5 mm) in diameter, 1/2 “for the active field

    FSR is Force Sensitive Resistor, allowing you to detect the physical pressure, extrusion, and weight.They are simple using, low cost.

    FSR is delimited by two layer, as the pressure increases, the activity of these elements point will touch the semiconductor, making resistance smaller

    Force Sensitive Resistor Sensor (FSR402)

    NPR 1,950.00
  • Quick View
    (0)
    Modules
    • This is 3.3V/5V FPM10A Fingerprint Reader Sensor Module
    • Optical Fingerprint Reader Sensor Module For Arduino Locks Serial Communication Interface

    FPM10A Fingerprint Reader Sensor Module (3.3V/5V)

    NPR 1,800.00
  • Quick View
    (0)
    Sensors

    GP2Y1010AU0F is a dust sensor by optical sensing
    system.
    An infrared emitting diode (IRED) and an phototransistor are diagonally arranged into this device.
    It detects the reflected light of dust in air.
    Especially, it is effective to detect very fine particle
    like the cigarette smoke.
    In addition it can distinguish smoke from house dust
    by pulse pattern of output voltage.

    GP2Y1010AU0F is a dust sensor by optical sensing system
    An infrared emitting diode (IRED) and an phototransistor are diagonally arranged into this device
    It detects the reflected light of dust in air.
    Especially, it is effective to detect very fine particle like the cigarette smoke
    In addition it can distinguish smoke from house dust by pulse pattern of output voltage
    Compact, thin package (46.0 × 30.0 × 17.6 mm)
    Low consumption current (Icc: MAX. 20 mA)
    The presence of dust can be detected by the photometry of only one pulse
    Enable to distinguish smoke from house dust
    Lead-free and RoHS directive compliant
    Compliant with RoHS directive (2002/95/EC)

    Dust sensor Smoke Particle Sensor With Cable GP2Y1010AU0F

    NPR 1,790.00
  • -22%
    Quick View
    (0)
    Sensors

    Model:   SCT-013-000

    Rated input current:0-100A.

    Output: 0-50mA or 0-1V.

    Split Core Current Sensor Transformer SCT013

    NPR 1,560.00
  • Quick View
    (0)
    Sensors

    The GY-271 HMC5883L 3-axis Electronic Compass Module Magnetic Field Sensor is designed for low field magnetic sensing with a digital interface and it is perfect to give precise heading information. This compact sensor fits into small projects such as UAVs and robot navigation systems.

    HMC5883L Triple Axis Compass Magnetometer Sensor Gy271

    NPR 900.00
  • -19%
    Quick View
    (0)
    Sensors

    Take your sonar outside – great for all weather robots! The XL-MaxSonar-WRMA1 ignores smaller targets and only reports the range to target with the largest acoustic return. This is our most advanced weather resistant sensor designed for target detection and ranging outdoors or in tank or bin applications.

    Waterproof ultrasonic sensor

    NPR 890.00
  • Quick View
    (0)
    Modules

    This module is based on the I2C light-to-digital converter TSL2561 to transform light intensity to a digital signal. Different from the traditional analog light sensor, this digital module features a selectable light spectrum range due to its dual light-sensitive diodes: infrared and full spectrum.

    You can switch among three detection modes to take your readings. They are infrared mode, full spectrum, and human visible mode. When running under the human visible mode, this sensor will give you readings just close to your eye feelings.

    Digital Light Sensor Module (TSL2561)

    NPR 800.00
  • Quick View
    (0)
    Sensors

    This sealed anti-rust digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings, so that only one wire (and ground) needs to be connected from a central microprocessor.

    Waterproof Temperature Sensor (DS18B20)

    NPR 700.00
  • Quick View
    (0)
    Sensors

    The TCS3200 programmable color light-to-frequency converter combines configurable silicon photodiodes and a current-to-frequency converter on a single monolithic CMOS integrated circuit. The output is a square wave (50% duty cycle) with frequency directly proportional to light intensity (irradiance).  The TCS3200 reads an 8×8 array of photodiodes.

    TCS 3200 (Color Sensor)

    NPR 680.00
  • Quick View
    (0)
    Sensors

    This sensor sits in line with your water line and contains a pinwheel sensor to measure how much liquid has moved through it. There’s an integrated magnetic hall effect sensor that outputs an electrical pulse with every revolution. The hall effect sensor is sealed from the water pipe and allows the sensor to stay safe and dry.

    Water Flow Sensor YF-S201

    NPR 680.00
  • Quick View
    (0)
    Modules

    DHT22 capacitive humidity sensing digital temperature and humidity module is one that contains the compound has been calibrated digital signal output of the temperature and humidity sensors. Application of a dedicated digital modules collection technology and the temperature and humidity sensing technology, to ensure that the product has high reliability and excellent long-term stability.

    Temperature Humidity Sensor DHT-22 Module

    NPR 620.00
  • Quick View
    (0)
    Sensors

    Widely used in motor speed detection, pulse-counting, any position, possesses 2 road testing.

    Two Way Velocimetry Sensor Module XD 211

    NPR 550.00
  • Quick View
    (0)
    Sensors

     Gas Sensor(MQ9) module is useful for gas leakage detection (in home and industry). It is suitable for detecting LPG, CO, CH4. Due to its high sensitivity and fast response time, measurements can be taken as soon as possible. The sensitivity of the sensor can be adjusted by using the potentiometer.

    Gas Sensor (MQ9)

    NPR 550.00
  • Quick View
    (0)
    Sensors
    This gas sensor for monitoring indoor air qualit. it is suitable for sensing NH3, NOx, alcohol, Benzene, smoke and CO2 in the air. The MQ-135 can detect NH3 and Alcohol gas concentrations anywhere from 10-300ppm and Benzene from 10-1000ppm. This sensor has a high sensitivity and fast response time. The sensitivity of the sensor can be adjusted by potentiometer.

    Gas Sensor (MQ135)

    NPR 550.00