Sensor

Show
  • Quick View
    (0)

    This capacitive touch sensor module uses the TTP229 integrated circuit, making it easy to add capacitive touch input for projects. It features 16 sensitive touch pads that make an ideal replacement for the traditional keypads.

    16 Channel Digital Capacitive Switch Touch Sensor Module

    NPR 350.00
  • Quick View
    (0)

    Accurate sensor to measure AC/DC current up to 20A. The sensor can even measure high AC mains current and is still isolated from the measuring part due to integrated hall sensor. The board operates on 5V. ACS712 current sensor operates from 5V and outputs analog voltage proportional to current measured on the sensing terminals. You can simple use a microcontroller ADC to read the values.

    20A Hall Current Sensor ACS712-20A

    NPR 480.00
  • Quick View
  • Quick View
    (0)

    Arduino Sensor Shield is a board used to connect sensors, servos, LCD with the Arduino Board without the requirement of soldering. Using Arduino Board separately you’ll find a few of 5V and GND connections. Arduino Sensor Shield gives you the ability of dedicated one 5V and GND connection for every Arduino signal pin.

    Arduino Sensor Shield

    NPR 500.00
  • Quick View
  • -22%
    Quick View
    (0)

    Barometric Pressure sensor measures the absolute pressure of the air around it. This pressure varies with both the air and altitude. Depending upon the interpretation of the data, changes in the weather can be monitored, altitude can be measured, and any task can be done that requires the accurate pressure measurement.

    BMP 180 (Pressure Sensor)

    NPR 350.00
  • Quick View
    (0)
    This is Carbon Monoxide sensor is suitable for sensing CO concentrations in the air. The MQ-7 can detect CO-gas concentrations anywhere from 20 to 2000ppm.This sensor has a high sensitivity and fast response time. The sensor’s output is an analog resistance. The drive circuit is very simple; all you need to do is power the heater coil with 5V, add a load resistance, and connect the output to an ADC.

    Carbon Monoxide Sensor (MQ7 | MQ-7)

    NPR 550.00
  • Quick View
    (0)

    This module is based on the I2C light-to-digital converter TSL2561 to transform light intensity to a digital signal. Different from the traditional analog light sensor, this digital module features a selectable light spectrum range due to its dual light-sensitive diodes: infrared and full spectrum.

    You can switch among three detection modes to take your readings. They are infrared mode, full spectrum, and human visible mode. When running under the human visible mode, this sensor will give you readings just close to your eye feelings.

    Digital Light Sensor Module (TSL2561)

    NPR 800.00
  • Quick View
    (0)

    GP2Y1010AU0F is a dust sensor by optical sensing
    system.
    An infrared emitting diode (IRED) and an phototransistor are diagonally arranged into this device.
    It detects the reflected light of dust in air.
    Especially, it is effective to detect very fine particle
    like the cigarette smoke.
    In addition it can distinguish smoke from house dust
    by pulse pattern of output voltage.

    GP2Y1010AU0F is a dust sensor by optical sensing system
    An infrared emitting diode (IRED) and an phototransistor are diagonally arranged into this device
    It detects the reflected light of dust in air.
    Especially, it is effective to detect very fine particle like the cigarette smoke
    In addition it can distinguish smoke from house dust by pulse pattern of output voltage
    Compact, thin package (46.0 × 30.0 × 17.6 mm)
    Low consumption current (Icc: MAX. 20 mA)
    The presence of dust can be detected by the photometry of only one pulse
    Enable to distinguish smoke from house dust
    Lead-free and RoHS directive compliant
    Compliant with RoHS directive (2002/95/EC)

    Dust sensor Smoke Particle Sensor With Cable GP2Y1010AU0F

    NPR 1,790.00
  • Quick View
    (0)
    • Product Model: FSR402:
    • Size: thick (12.5 mm) in diameter, 1/2 “for the active field

    FSR is Force Sensitive Resistor, allowing you to detect the physical pressure, extrusion, and weight.They are simple using, low cost.

    FSR is delimited by two layer, as the pressure increases, the activity of these elements point will touch the semiconductor, making resistance smaller

    Force Sensitive Resistor Sensor (FSR402)

    NPR 1,950.00
  • Quick View
    (0)
    • This is 3.3V/5V FPM10A Fingerprint Reader Sensor Module
    • Optical Fingerprint Reader Sensor Module For Arduino Locks Serial Communication Interface

    FPM10A Fingerprint Reader Sensor Module (3.3V/5V)

    NPR 1,800.00
  • Quick View
    (0)
    This gas sensor for monitoring indoor air qualit. it is suitable for sensing NH3, NOx, alcohol, Benzene, smoke and CO2 in the air. The MQ-135 can detect NH3 and Alcohol gas concentrations anywhere from 10-300ppm and Benzene from 10-1000ppm. This sensor has a high sensitivity and fast response time. The sensitivity of the sensor can be adjusted by potentiometer.

    Gas Sensor (MQ135)

    NPR 550.00
  • Quick View
    (0)

     Gas Sensor(MQ9) module is useful for gas leakage detection (in home and industry). It is suitable for detecting LPG, CO, CH4. Due to its high sensitivity and fast response time, measurements can be taken as soon as possible. The sensitivity of the sensor can be adjusted by using the potentiometer.

    Gas Sensor (MQ9)

    NPR 550.00
  • Quick View
    (0)

    Gas Sensor(MQ5) module is useful for gas leakage detection (in home and industry). It is suitable for detecting H2, LPG, CH4, CO, Alcohol. Due to its high sensitivity and fast response time, measurements can be taken as soon as possible. The sensitivity of the sensor can be adjusted by using the potentiometer.

    Gas Sensor(MQ5)

    NPR 500.00
  • Quick View
    (0)

    The GY-271 HMC5883L 3-axis Electronic Compass Module Magnetic Field Sensor is designed for low field magnetic sensing with a digital interface and it is perfect to give precise heading information. This compact sensor fits into small projects such as UAVs and robot navigation systems.

    HMC5883L Triple Axis Compass Magnetometer Sensor Gy271

    NPR 900.00
  • Quick View
    (0)

    HX711 is an electronic scale module, whose working principle is to convert the measured changes in resistance value changes, through the conversion circuit into electrical output. The module communicates with the host computer through TTL 232.

    HX711 Dual-Channel Weighing Sensor Module

    NPR 400.00