• (0)

    Genuine Arduino Mega 2560 R3(Italy)

    NPR 5,400.00

    The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins , 16 analog inputs, 4 UARTs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller.

  • (0)

    Arduino Micro Pro R3

    NPR 1,900.00

    The Arduino Micro is essentially a shrunk-down (1.9″ × 0.7″) version of the Arduino Leonardo: it is a microcontroller board based on the ATmega32U4 running at 16 MHz with 24 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs). This board ships with the male header pins soldered in.

  • (0)

    Arduino Nano 33 IoT wo headers

    NPR 7,015.00

    An IoT connected IMU sensor in the Nano form factor.

  • (0)

    Arduino Breadboard Shield

    NPR 450.00

    Works with the Uno! This prototyping shield is the best out there (well, we think so, at least). It works with UNO, NG, Diecimila and Duemilanove Arduinos.

  • (0)

    Arduino Nano 33 BLE

    NPR 7,705.00

    Arduino’s tiniest form factor with Bluetooth® and Bluetooth® Low Energy and embedded inertial sensor.

  • (0)

    Genuine Arduino UNO R3 (Italy) with 1 Year Warranty

    NPR 2,690.00

    The Arduino open-sourced IDE drivers can be downloaded for free and we have created a download and installation tutorial for the Windows XP platform.

    Features of the Arduino UNO:

    • Microcontroller: ATmega328
    • Operating Voltage: 5V
    • Input Voltage (recommended): 7-12V
    • Input Voltage (limits): 6-20V
    • Digital I/O Pins: 14 (of which 6 provide PWM output)
    • Analog Input Pins: 6
    • DC Current per I/O Pin: 40 mA
    • DC Current for 3.3V Pin: 50 mA
    • Flash Memory: 32 KB of which 0.5 KB used by bootloader
    • SRAM: 2 KB (ATmega328)
    • EEPROM: 1 KB (ATmega328)
    • Clock Speed: 16 MHz
  • (0)

    Arduino L293D Motor Driver Shield

    NPR 700.00

    The Arduino Motor Shield allows you to easily control motor direction and speed using an Arduino. By allowing you to simply address Arduino pins, it makes it very simple to incorporate a motor into your project. It also allows you to be able to power a motor with a separate power supply of up to 12v.

  • (0)

    Arduino Sensor Shield

    NPR 500.00

    Arduino Sensor Shield is a board used to connect sensors, servos, LCD with the Arduino Board without the requirement of soldering. Using Arduino Board separately you’ll find a few of 5V and GND connections. Arduino Sensor Shield gives you the ability of dedicated one 5V and GND connection for every Arduino signal pin.

  • (0)

    VGA OV7670 Camera Module Lens for Arduino

    NPR 800.00

    Feature:
    High sensitivity for low-light operation.
    Low operating voltage for embedded application.
    Standard SCCB interface compatible with I2C interface.
    Raw RGB, RGB (GRB4:2:2, RGB565/555/444),YUV(4:2:2) and YCbCr(4:2:2)output format.

    More Features:

    Support VGA, CIF and from CIF to 40 x 30 format.
    Vario Pixel method for sub-sampling.
    Auto Image Control: AEC, AGC, AWB, ABF, ABLC.
    Image Quality Control: Color saturation, hue, gamma, sharpness and anti-blooming.
    ISP includes noise reduction and defect correction.
    Support image scaling.
    Lens shading correction.
    Flicker 50/60Hz auto detection.
    Color saturation level auto adjust.
    Edge enhancement level auto adjust.
    De-noise level auto adjust.

  • (0)

    NodeMCU CP2102 (Arduino Like Hardware)

    NPR 1,250.00

    An open-source firmware and development kit that helps you to prototype your IOT product within a few Lua script lines.

    Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled.

  • (0)

    Arduino Starter Kit

    NPR 5,500.00

    Inspired From Arduino Starter Kit Multi-language.(Arduino.cc)
    Quickly and easily get started with learning electronics using the Arduino Starter Kit. No prior experience is required, as the kits introduce both coding and electronics through fun, engaging, and hands-on projects. 

  • (0)

    NodeMCU CH340 (Arduino Like Hardware)

    NPR 900.00

    NodeMCU is a Firmware on ESP8266. It is ESP-12 and it is basically a System on Chip (SoC). It has Lua based firmware which is used to develop IoT based applications. It is easy to work on this inexpensive SoC and make our device smart.

  • (0)

    Arduino MKR WiFi 1010

    NPR 13,310.00

    The Arduino MKR WiFi 1010 is the easiest point of entry to basic IoT and pico-network application design. Whether you are looking at building a sensor network connected to your office or home router, orif you want to create a Bluetooth® Low Energy device sending data to a cellphone, the MKR WiFi 1010 is your one-stop-solution for many of the basic IoT application scenarios.

  • (0)

    Arduino MKR1000

    NPR 14,035.00

    Arduino MKR1000 is a powerful board that combines the functionality of the Zero and the Wi-Fi Shield. It is the ideal solution for makers wanting to design IoT projects with minimal previous experience in networking.

  • (0)

    Arduino Nano with cable

    NPR 1,535.00

    The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) orATmega168 (Arduino Nano 2.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. The Nano was designed and is being produced by Gravitech.

    • • Automatic reset during program download
    • • Power OK blue LED
    • • Green (TX), red (RX) and orange (L) LED
    • • Auto sensing/switching power input
    • • Small mini-B USB for programming and serial monitor
    • • ICSP header for direct program download
    • • Standard 0.1” spacing DIP (breadboard friendly)
    • • Manual reset switch
  • (2)

    Arduino UNO R3 Mega328p CH340 Development Board

    NPR 1,690.00

    The Uno R3 CH340G ATmega328p Development Board is the low-cost version of the popular Uno R3 Arduino. It is assembled with the CH340 USB to Serial converter chip, instead of using an Atmega16U2 chip.